# Enclosure for Gladys

**URL:** <https://community.gladysassistant.com/t/boitier-pour-gladys/7509>\
**Category:** Partagez votre installation\
**Created:** [August 30, 2022, 6:47pm UTC](https://community.gladysassistant.com/t/boitier-pour-gladys/7509 "2022-08-30T18:47:20Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tlse-vins](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tlse-vins/32/6054_2.png) [@Tlse-vins](https://community.gladysassistant.com/u/Tlse-vins)\
**Post date:** [August 30, 2022, 6:47pm UTC](https://community.gladysassistant.com/t/boitier-pour-gladys/7509/1 "2022-08-30T18:47:20Z")

</div>

There was an old thread but I’m restarting it.

Share your physical setups.

Here’s mine, which is almost finished.

 ![20220830_203540](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/9/9a6ee76574e7071ac5fb28455463dc2cdcb054e4.jpeg)

 ![20220830_203503](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/e/e2bdbcbb07e1e8bd9fdde445326debc15989dd63.jpeg)

I’m missing the Bakelite buttons for the front panel and the magnetic plate for the rear.

---

<div class="post-metadata">

**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\
**Post date:** [August 31, 2022, 1:29pm UTC](https://community.gladysassistant.com/t/boitier-pour-gladys/7509/2 "2022-08-31T13:29:29Z")

</div>

That’s great 👍 thanks for sharing!

What is that big round orange thing right in the center?

I’m also thinking about finding a box for my setup — I’m considering a 3D-printed enclosure to manage the cable routing well and to have little or no impact on the Zigbee signal.

Are you plugged into a UPS?  
As for me, I think I’m going to build a mini UPS just for Gladys, using 18650 cells. I’d still need to find a tutorial on that 😁

---

<div class="post-metadata">

**Author:** ![Tlse-vins](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tlse-vins/32/6054_2.png) [@Tlse-vins](https://community.gladysassistant.com/u/Tlse-vins)\
**Post date:** [August 31, 2022, 2:22pm UTC](https://community.gladysassistant.com/t/boitier-pour-gladys/7509/3 "2022-08-31T14:22:14Z")

</div>

- On the left it’s a Zigbee siren
- In the middle it’s the Google Home that I installed using 3D printing to mount it

---

<div class="post-metadata">

**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\
**Post date:** [August 31, 2022, 4:44pm UTC](https://community.gladysassistant.com/t/boitier-pour-gladys/7509/4 "2022-08-31T16:44:30Z")

</div>

I recognized the siren, I have the same one 👍

---

<div class="post-metadata">

**Author:** ![gsr\_oyo](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gsr_oyo/32/9051_2.png) [@gsr\_oyo](https://community.gladysassistant.com/u/gsr_oyo)\
**Post date:** [September 20, 2022, 8:02am UTC](https://community.gladysassistant.com/t/boitier-pour-gladys/7509/5 "2022-09-20T08:02:25Z")

</div>

Mine is much simpler.  
Just missing my Zigbee USB adapter 😉

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/c/c749ffc950103afa6e990470a29c85d94c042de6.jpeg)