# Bouton poussoir sur le tableau de bord **URL:** \ **Category:** Demandes livrées\ **Tags:** feature-core, feature-category\ **Created:** [Janvier 11, 2022, 9:40 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780 "2022-01-11T21:40:32Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![Fabic](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/f/a698b9/32.png) [@Fabic](https://community.gladysassistant.com/u/Fabic)\ **Post date:** [Janvier 11, 2022, 9:40 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/1 "2022-01-11T21:40:32Z")
Je propose d’ajouter un bouton à impulsion dans les fonctionnalités des Appareils. Par exemple, un des premiers équipement que l’on souhaite contrôler est le ou les volets roulants électriques. Une des possibilités est d’utiliser les fonctionnalités proposées ici : [Gestion des volets roulants - #13 par syper](https://community.gladysassistant.com/t/gestion-des-volets-roulants/5693/13) Une autre possibilité est d’utiliser uniquement un bouton à impulsion (toujours le même message) qui permet de monter, de stopper ou de descendre le volet. Derrière bien sûr il faut gérer la commande par un programme. Voici un exemple sous node-red (non testé en réel et sûrement à simplifier et améliorer) : ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/0/0aa9428f96ec09eef1de07cead2969f1dc1002f8.png) ```auto [{"id":"f7c7dff4.84a878","type":"tab","label":"Flow 1","disabled":false,"info":""},{"id":"d9c64d70.401e88","type":"toggle","z":"f7c7dff4.84a878","name":"","onOffTopic":"","onValue":"Monter","onType":"str","offValue":"Descendre","offType":"str","toggleTopic":"","toggleValue":"","toggleType":"any","passOnOff":"ifChanged","x":710,"y":620,"wires":[["78be339b.b82cd4"]]},{"id":"7e57fa0e.b124ac","type":"gate","z":"f7c7dff4.84a878","name":"Porte1","controlTopic":"control","defaultState":"open","openCmd":"open","closeCmd":"close","toggleCmd":"toggle","defaultCmd":"default","statusCmd":"status","persist":false,"x":410,"y":620,"wires":[["d9c64d70.401e88","59dd700a.af8a48"]]},{"id":"9e19b878.d70778","type":"inject","z":"f7c7dff4.84a878","name":"","props":[{"p":"payload"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","payload":"1","payloadType":"num","x":120,"y":620,"wires":[["7e57fa0e.b124ac","d88405a7.90e3d","150843d.3e3c5bc"]]},{"id":"59dd700a.af8a48","type":"change","z":"f7c7dff4.84a878","name":"Fermeture porte1","rules":[{"t":"set","p":"payload","pt":"msg","to":"close","tot":"str"},{"t":"set","p":"topic","pt":"msg","to":"control","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":410,"y":700,"wires":[["7e57fa0e.b124ac"]]},{"id":"eb39983c.de23b","type":"delay","z":"f7c7dff4.84a878","name":"Delais-Monter","pauseType":"delay","timeout":"5","timeoutUnits":"seconds","rate":"1","nbRateUnits":"1","rateUnits":"second","randomFirst":"1","randomLast":"5","randomUnits":"seconds","drop":false,"x":380,"y":340,"wires":[["28a95477.a4e2e4","4c732a2e.09a63c","6279ad34.e5249c"]]},{"id":"28a95477.a4e2e4","type":"change","z":"f7c7dff4.84a878","name":"Ouverture porte1 ","rules":[{"t":"set","p":"payload","pt":"msg","to":"open","tot":"str"},{"t":"set","p":"topic","pt":"msg","to":"control","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":810,"y":380,"wires":[["7e57fa0e.b124ac"]]},{"id":"78be339b.b82cd4","type":"switch","z":"f7c7dff4.84a878","name":"","property":"payload","propertyType":"msg","rules":[{"t":"eq","v":"Monter","vt":"str"},{"t":"eq","v":"Descendre","vt":"str"}],"checkall":"true","repair":false,"outputs":2,"x":830,"y":620,"wires":[["eb39983c.de23b","56c08aac.df5f54"],["9d214b72.543dd8","d7d4fc60.b18198"]]},{"id":"9d214b72.543dd8","type":"delay","z":"f7c7dff4.84a878","name":"Delais-Descendre","pauseType":"delay","timeout":"5","timeoutUnits":"seconds","rate":"1","nbRateUnits":"1","rateUnits":"second","randomFirst":"1","randomLast":"5","randomUnits":"seconds","drop":false,"x":390,"y":500,"wires":[["28a95477.a4e2e4","4c732a2e.09a63c","6279ad34.e5249c"]]},{"id":"3da4444c.f68c74","type":"pi-gpiod out","z":"f7c7dff4.84a878","name":"Cmd-Descendre","host":"localhost","port":8888,"pin":"17","set":true,"level":"0","out":"out","sermin":"1000","sermax":"2000","freq":"800","x":1320,"y":720,"wires":[]},{"id":"96fd20cc.c28ee8","type":"pi-gpiod out","z":"f7c7dff4.84a878","name":"Cmd-Monter","host":"localhost","port":8888,"pin":"18","set":true,"level":"0","out":"out","sermin":"1000","sermax":"2000","freq":"800","x":1270,"y":500,"wires":[]},{"id":"4c732a2e.09a63c","type":"change","z":"f7c7dff4.84a878","name":"RAZ cmd Monter et Descendre","rules":[{"t":"set","p":"payload","pt":"msg","to":"0","tot":"num"}],"action":"","property":"","from":"","to":"","reg":false,"x":790,"y":320,"wires":[["96fd20cc.c28ee8","3da4444c.f68c74","7d3de0e.ac55ea","957cfc2a.95f948"]]},{"id":"d7d4fc60.b18198","type":"change","z":"f7c7dff4.84a878","name":"Cmd Descendre","rules":[{"t":"set","p":"payload","pt":"msg","to":"1","tot":"num"}],"action":"","property":"","from":"","to":"","reg":false,"x":1000,"y":680,"wires":[["3da4444c.f68c74","957cfc2a.95f948"]]},{"id":"56c08aac.df5f54","type":"change","z":"f7c7dff4.84a878","name":"Cmd Monter","rules":[{"t":"set","p":"payload","pt":"msg","to":"1","tot":"num"}],"action":"","property":"","from":"","to":"","reg":false,"x":990,"y":560,"wires":[["96fd20cc.c28ee8","7d3de0e.ac55ea"]]},{"id":"150843d.3e3c5bc","type":"gate","z":"f7c7dff4.84a878","name":"Porte2","controlTopic":"control","defaultState":"closed","openCmd":"open","closeCmd":"close","toggleCmd":"toggle","defaultCmd":"default","statusCmd":"status","persist":false,"x":470,"y":840,"wires":[["4c732a2e.09a63c","28a95477.a4e2e4","6279ad34.e5249c","dc5b447a.5abbb8"]]},{"id":"d88405a7.90e3d","type":"change","z":"f7c7dff4.84a878","name":"Ouverture porte2","rules":[{"t":"set","p":"payload","pt":"msg","to":"open","tot":"str"},{"t":"set","p":"topic","pt":"msg","to":"control","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":210,"y":840,"wires":[["150843d.3e3c5bc"]]},{"id":"6279ad34.e5249c","type":"change","z":"f7c7dff4.84a878","name":"Fermeture porte2","rules":[{"t":"set","p":"payload","pt":"msg","to":"close","tot":"str"},{"t":"set","p":"topic","pt":"msg","to":"control","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":810,"y":460,"wires":[["150843d.3e3c5bc"]]},{"id":"7d3de0e.ac55ea","type":"debug","z":"f7c7dff4.84a878","name":"ordre monter","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":1180,"y":360,"wires":[]},{"id":"957cfc2a.95f948","type":"debug","z":"f7c7dff4.84a878","name":"Ordre descendre","active":true,"tosidebar":true,"console":false,"tostatus":false,"complete":"payload","targetType":"msg","statusVal":"","statusType":"auto","x":1190,"y":800,"wires":[]},{"id":"dc5b447a.5abbb8","type":"change","z":"f7c7dff4.84a878","name":"Reset Delais","rules":[{"t":"set","p":"reset","pt":"msg","to":"","tot":"str"}],"action":"","property":"","from":"","to":"","reg":false,"x":140,"y":440,"wires":[["eb39983c.de23b","9d214b72.543dd8"]]}] ``` Ce qui est cool avec un bouton à impulsion c’est qu’on peut commander ce qu’on veut (un moteur, une fonction télérupteur, une RAZ, le programmer en appui court ou long, double clic…). ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [Janvier 14, 2022, 9:26 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/2 "2022-01-14T09:26:38Z")
@Fabic quelle est la différence avec la fonctionnalité “clic bouton” qu’on a actuellement ? 🙂 ![Screenshot 2022-01-14 at 10.26.17](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/e/e385c2fb3bf36d246472e84dc844fad48a2e3112.png) ---
**Author:** ![Fabic](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/f/a698b9/32.png) [@Fabic](https://community.gladysassistant.com/u/Fabic)\ **Post date:** [Janvier 14, 2022, 5:00 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/3 "2022-01-14T17:00:43Z")
Bonjour @pierre-gilles, sauf erreur de ma part, le clic bouton ne permet que de lire un état envoyé à Gladys. L’idée ici est de commander, comme avec la fonctionnalité “Eclairage ON/OFF” mais avec un bouton à impulsion ou bouton poussoir. Pour essayer d’illustrer, dans une habitation par exemple tu commandes en général les lumières par un (ou 2 interrupteurs) : c’est l’équivalent de la fonctionnalité “Eclairage ON/OFF”. Cependant quand les commandes dépassent deux interrupteurs on utilise un télérupteur (même si le montage est réalisable en filaire mais beaucoup plus compliqué) commandé par des interrupteurs poussoirs (qui reviennent toujours à leur position). Le télérupteur changera d’état à chaque impulsion, contact ouvert puis fermé (0 puis 1 puis 0 …) qu’il soit commandé avec le 1er interrupteur poussoir ou le énième. Dans l’application, en appuyant sur le bouton à impulsion on pourrait envoyer à chaque appui le même message via les API (par exemple 1) pour commander ce que l’on veut! ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [Janvier 14, 2022, 5:24 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/4 "2022-01-14T17:24:03Z")
> [@Fabic](#): > > sauf erreur de ma part, le clic bouton ne permet que de lire un état envoyé à Gladys. > L’idée ici est de commander, comme avec la fonctionnalité “Eclairage ON/OFF” mais avec un bouton à impulsion ou bouton poussoir. Effectivement my bad tu as raison ! Il manque ce bouton dans l’autre sens 🙂 ---
**Author:** ![Fabic](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/f/a698b9/32.png) [@Fabic](https://community.gladysassistant.com/u/Fabic)\ **Post date:** [Janvier 14, 2022, 5:29 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/5 "2022-01-14T17:29:33Z")
Pour la représentation j’aurai bien vu un cercle bleu qui passe au blanc 1/2 seconde pendant l’impulsion ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [Mars 4, 2022, 6:10 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/6 "2022-03-04T18:10:23Z")
C’est un toggle en fait non ? ---
**Author:** ![spenceur](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/spenceur/32/1961_2.png) [@spenceur](https://community.gladysassistant.com/u/spenceur)\ **Post date:** [Mars 4, 2022, 6:59 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/7 "2022-03-04T18:59:23Z")
Je pense qu’il veut juste un push bouton comme on avait fait à l’époque de la v3 avec @piznel et @MathieuA [https://community.gladysassistant.com/t/devicetype-de-type-push-button/2886?u=spenceur](https://community.gladysassistant.com/t/devicetype-de-type-push-button/2886) Le bouton revient automatiquement à l’état 0 après un apuis ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [Mars 4, 2022, 7:02 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/8 "2022-03-04T19:02:38Z")
Ah ok je vois ( j’avais pas compris 😅) ---
**Author:** ![Fabic](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/f/a698b9/32.png) [@Fabic](https://community.gladysassistant.com/u/Fabic)\ **Post date:** [Mars 4, 2022, 8:56 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/9 "2022-03-04T20:56:32Z")
Exactement, soit un toggle qui revient automatiquement à 0 soit un bouton qui revient à sa position. Aujourd’hui gladys fait ça : [https://www.se.com/fr/fr/product/XB4BD21/harmony-xb4-bouton-tournant-manette-ø22-2-pos-fix-noir-1f-vis-étrier/?parent-subcategory-id=89188](https://www.se.com/fr/fr/product/XB4BD21/harmony-xb4-bouton-tournant-manette-%C3%B822-2-pos-fix-noir-1f-vis-%C3%A9trier/?parent-subcategory-id=89188) Ma proposition : [https://www.se.com/fr/fr/product/XB4BA21/harmony-xb4-bouton-poussoir-à-impulsion-ø22-noir-1f-vis-étrier/?parent-subcategory-id=89188](https://www.se.com/fr/fr/product/XB4BA21/harmony-xb4-bouton-poussoir-%C3%A0-impulsion-%C3%B822-noir-1f-vis-%C3%A9trier/?parent-subcategory-id=89188) ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [Mars 4, 2022, 8:57 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/10 "2022-03-04T20:57:31Z")
Ouai comme un klaxon 😁 ---
**Author:** ![Fabic](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/f/a698b9/32.png) [@Fabic](https://community.gladysassistant.com/u/Fabic)\ **Post date:** [Mars 4, 2022, 9:02 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/11 "2022-03-04T21:02:39Z")
Tout à fait! Le toggle Gladys actuel c’est le warning ---
**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\ **Post date:** [Mai 11, 2022, 3:56 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/12 "2022-05-11T15:56:39Z")
Je ne peux plus voter… mais je plussoies cette demande de fonctionnalité ! 😉 ---
**Author:** ![b3n.0](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/b3n.0/32/3458_2.png) [@b3n.0](https://community.gladysassistant.com/u/b3n.0)\ **Post date:** [Janvier 8, 2023, 5:49 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/13 "2023-01-08T17:49:11Z")
Pour un besoin similaire j’ai fait un fake device MQTT en fonction commutateur et derrière j’ai une scene qui s’active dès que le bouton passe en ON et après avoir attendu 500ms repasse automatiquement le commutateur sur OFF. Ensuite ce bouton peut etre assigné via une autre scène à contrôler autre chose… Ca fonctionne sur un principe d’appui court… Je ne sais pas si ca peut dépanner en attendant ? ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [Novembre 8, 2024, 2:35 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/14 "2024-11-08T14:35:02Z")
Hello à tous 🙂 J’ai fais une PR ! Dans l’intégration MQTT, on pourra trouver un nouveau type « Bouton poussoir »: ![Screenshot 2024-11-08 at 15.34.31](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/2/3/23e3ce1d08070b225fc99c50b13823955b3939b9.png) Petite démo en vidéo : La PR : > > > \### Pull Request check-list > > To ensure your Pull Request can be accepted as fa…st as possible, make sure to review and check all of these items: > > \- \[x\] If your changes affects code, did your write the tests? > \- \[x\] Are tests passing? (\`npm test\` on both front/server) > \- \[x\] Is the linter passing? (\`npm run eslint\` on both front/server) > \- \[x\] Did you run prettier? (\`npm run prettier\` on both front/server) > \- \[x\] If you are adding a new features/services, did you run integration comparator? (\`npm run compare-translations\` on front) > \- \[x\] Did you test this pull request in real life? With real devices? If this development is a big feature or a new service, we recommend that you provide a Docker image to the community (\[french forum\](https://community.gladysassistant.com/)/\[english forum\](https://en-community.gladysassistant.com/)) for testing before merging. > \- \[\] > \### Description of change > > https://github.com/user-attachments/assets/9a499f52-8594-494c-b80c-28764c17db6c ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [Novembre 11, 2024, 10:45 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/15 "2024-11-11T10:45:00Z")
Cette fonctionnalité est disponible dans Gladys Assistant 4.49 : > [@Gladys Assistant 4.49 : Déclencheurs avec délai dans les scènes!](https://community.gladysassistant.com/t/gladys-assistant-4-49-declencheurs-avec-delai-dans-les-scenes/9181): > > Salut à tous ! Nouvelle version de Gladys aujourd’hui, avec des fonctionnalités vraiment sympa smile Déclencheur avec délai dans les scènes Il est désormais possible d’ajouter un délai avant le déclenchement d’une scène sur valeur de capteur. Par exemple, si vous avez un capteur de mouvement, et que vous voulez vérifier qu’il n’y a pas de mouvement pendant au moins 5 minutes avant de couper la lumière, vous pouvez désormais faire ça : Cette condition … Je ferme ce sujet pour libérer les votes 🙏 ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [Novembre 11, 2024, 10:45 UTC](https://community.gladysassistant.com/t/bouton-poussoir-sur-le-tableau-de-bord/6780/16 "2024-11-11T10:45:02Z")