# \[Broadlink\] Devices detected but no commands work

**URL:** <https://community.gladysassistant.com/t/broadlink-appareils-detectes-mais-aucune-commande-ne-fonctionne/10738>\
**Category:** Configuration\
**Created:** [August 28, 2026, 3:04pm UTC](https://community.gladysassistant.com/t/broadlink-appareils-detectes-mais-aucune-commande-ne-fonctionne/10738 "2026-08-28T15:04:06Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![b3n.0](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/b3n.0/32/3458_2.png) [@b3n.0](https://community.gladysassistant.com/u/b3n.0)\
**Post date:** [August 28, 2026, 3:04pm UTC](https://community.gladysassistant.com/t/broadlink-appareils-detectes-mais-aucune-commande-ne-fonctionne/10738/1 "2026-08-28T15:04:06Z")

</div>

Hi,

Since I got back from vacation (about two weeks ago), I’ve been having trouble with the Broadlink integration.

- **Broadlink Integration → Available Broadlink Devices** : Both of my devices are correctly detected, **RM4 Mini** and **RM4 Pro**.

- **Broadlink Devices →** My created remotes are also present.

- The Broadlink devices are present on my network and respond to ping.

- However, **no commands work in Gladys** , whether by directly pressing a command or via a scene.

Has anyone else encountered the same issue with the Broadlink integration?

Thanks!

---

<div class="post-metadata">

**Author:** ![mutmut](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/mutmut/32/14064_2.png) [@mutmut](https://community.gladysassistant.com/u/mutmut)\
**Post date:** [August 30, 2026, 12:36pm UTC](https://community.gladysassistant.com/t/broadlink-appareils-detectes-mais-aucune-commande-ne-fonctionne/10738/2 "2026-08-30T12:36:24Z")

</div>

Hello @b3n.0  
I just tested it at my place with my RM4mini and it works well.  
I did a learning session on a new device, not a test from an already registered old device.

---

<div class="post-metadata">

**Author:** ![b3n.0](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/b3n.0/32/3458_2.png) [@b3n.0](https://community.gladysassistant.com/u/b3n.0)\
**Post date:** [September 2, 2026, 5:25am UTC](https://community.gladysassistant.com/t/broadlink-appareils-detectes-mais-aucune-commande-ne-fonctionne/10738/3 "2026-09-02T05:25:13Z")

</div>

Hey @mutmut

Yes, if I create a new device it works, I just replaced the «&nbsp;power&nbsp;» button of my video projector… test ok, replacement in the scenes ok…

Now just the laziness of doing the same thing with all the others 😩

---

<div class="post-metadata">

**Author:** ![b3n.0](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/b3n.0/32/3458_2.png) [@b3n.0](https://community.gladysassistant.com/u/b3n.0)\
**Post date:** [September 3, 2026, 12:37pm UTC](https://community.gladysassistant.com/t/broadlink-appareils-detectes-mais-aucune-commande-ne-fonctionne/10738/4 "2026-09-03T12:37:19Z")

</div>

Continuation of the story…

I just discovered that the «&nbsp;linked peripheral&nbsp;» in the device configuration had disappeared

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/5/d/5d4d22c2e94714bef021ee4991c67b218ae03dec.png)

I put it back, validated the configuration and it’s back up and running! 🥳

However, I don’t know why they disappeared!

---

<div class="post-metadata">

**Author:** ![mutmut](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/mutmut/32/14064_2.png) [@mutmut](https://community.gladysassistant.com/u/mutmut)\
**Post date:** [September 3, 2026, 5:47pm UTC](https://community.gladysassistant.com/t/broadlink-appareils-detectes-mais-aucune-commande-ne-fonctionne/10738/5 "2026-09-03T17:47:34Z")

</div>

I think we’ll need to 1/do an external integration and 2/put this test check in it.