# \[bug?\] Le lien zigbee2mqtt disparait après sauvegarde

**URL:** <https://community.gladysassistant.com/t/bug-le-lien-zigbee2mqtt-disparait-apres-sauvegarde/10358>\
**Category:** Configuration\
**Tags:** zigbee2mqtt\
**Created:** [Juillet 18, 2026, 8:12 UTC](https://community.gladysassistant.com/t/bug-le-lien-zigbee2mqtt-disparait-apres-sauvegarde/10358 "2026-07-18T08:12:55Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![mutmut](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/mutmut/32/14064_2.png) [@mutmut](https://community.gladysassistant.com/u/mutmut)\
**Post date:** [Juillet 18, 2026, 8:12 UTC](https://community.gladysassistant.com/t/bug-le-lien-zigbee2mqtt-disparait-apres-sauvegarde/10358/1 "2026-07-18T08:12:55Z")

</div>

Hello,  
lorsque l’on clique sur `Sauvegarder` sur un appareil Z2M après une mise à jour de la pièce par exemple, le lien vers zigbee2mqtt disparait le temps du prochain refresh de la page.  
C’est un comportement voulu ?

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/c/4/c4d41601b3398d6a03ac2213e9350753d63a968e.png)

---

<div class="post-metadata">

**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\
**Post date:** [Juillet 18, 2026, 11:08 UTC](https://community.gladysassistant.com/t/bug-le-lien-zigbee2mqtt-disparait-apres-sauvegarde/10358/2 "2026-07-18T11:08:58Z")

</div>

Non ce n’est pas voulu. Je regarde dès que je peux

---

<div class="post-metadata">

**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\
**Post date:** [Juillet 18, 2026, 1:56 UTC](https://community.gladysassistant.com/t/bug-le-lien-zigbee2mqtt-disparait-apres-sauvegarde/10358/3 "2026-07-18T13:56:25Z")

</div>

voila une correction

> <https://github.com/GladysAssistant/Gladys/pull/2681>
>
> \### Pull Request check-list
> 
> To ensure your Pull Request can be accepted as fa…st as possible, make sure to review and check all of these items:
> 
> \- \[\] If your changes affect the code, did you write the tests?
> \- \[\] Are server tests passing with coverage? (\`cd server && npm run coverage\`) — Codecov requires \*\*100% coverage on lines changed in this PR\*\*
> \- \[\] Did Cypress E2E tests pass? (\`npm run cypress:run\` from repo root, if UI changed)
> \- \[x\] Is the linter passing? (\`npm run eslint\` on both front/server)
> \- \[x\] Did you run prettier? (\`npm run prettier\` on both front/server)
> \- \[\] If you are adding a new feature/service, did you run the integration comparator? (\`npm run compare-translations\` on front)
> \- \[x\] Did you test this pull request in real life? With real devices?
> \- \[\] If your changes modify the API (REST or Node.js), did you modify the API documentation?
> \- \[\] If you are adding a new features/services which needs explanation, did you modify the user documentation?
> \- \[\] Did you add fake requests data for the demo mode (\`front/src/config/demo.js\`)?
> 
> \### Description of change
> 
> On the Zigbee2mqtt device page, the IEEE address field and the "Open in Zigbee2mqtt" link (added in #2488) disappeared as soon as the device was saved (e.g. after changing its room), and only came back after a full page reload.
> 
> \*\*Why:\*\* \`ieee\_address\` is not stored in the Gladys database. It is enriched client-side when the device list is loaded, by matching saved devices against the devices discovered by Zigbee2mqtt. When saving a device, \`saveDevice\` replaces the device in the state with the raw server response, which doesn't contain \`ieee\_address\`, so the whole block was hidden. The \`model\` field had the exact same issue and was already copied back after save — \`ieee\_address\` was simply missing.
> 
> \*\*Fix:\*\* one line in \`front/src/routes/integration/all/zigbee2mqtt/device-page/actions.js\`: copy \`ieee\_address\` from the local device to the saved device, exactly like \`model\`.

---

<div class="post-metadata">

**Author:** ![Chris\_C](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/chris_c/32/22649_2.png) [@Chris\_C](https://community.gladysassistant.com/u/Chris_C)\
**Post date:** [Octobre 5, 2026, 2:47 UTC](https://community.gladysassistant.com/t/bug-le-lien-zigbee2mqtt-disparait-apres-sauvegarde/10358/4 "2026-10-05T14:47:47Z")

</div>

J’en profite pour poser une petite question : j’ai dû arrêter et redémarrer mon serveur plusieurs fois ces derniers temps à cause de travaux.  
A chaque fois je dois faire une restauration de sauvegarde de la config Gladys et à chaque fois, les services démarrent mais le lien entre MQTT et ZIGBEE2MQTT ne se fait pas. Du coup, mes capteurs ne remontent plus rien et je dois réinitialiser l’intégration, et ajouter à nouveau les capteurs.

Avez vous une piste pour résoudre ce type de chose ?