# Bug widget Room Temperature **URL:** \ **Category:** Configuration\ **Created:** [October 13, 2021, 7:46am UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593 "2021-10-13T07:46:08Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![Albenss](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/albenss/32/3916_2.png) [@Albenss](https://community.gladysassistant.com/u/Albenss)\ **Post date:** [October 13, 2021, 7:46am UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/1 "2021-10-13T07:46:08Z")
Hello, A quick question, I have several Z2M devices in the same room, namely: - Aqara door & window contact sensor (Xiaomi MCCGQ11LM) - Temperature & humidity sensor with display (TuYa TS0201) - Aqara human body movement and illuminance sensor (Xiaomi RTCGQ11LM) The problem is that three of these elements have a temperature in their features, but only one is a real temperature from a temperature/humidity sensor (TuYa TS0201). But on the Room Temperature Widget, it’s the temperature of one of the other sensors that is used. Is there a way to specify the device to use in this box or to remove features from the other devices? ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [October 13, 2021, 8:01am UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/2 "2021-10-13T08:01:34Z")
Interesting, I admit I hadn’t considered that case when implementing this feature! Can you tell me more about your case? Why only one of these three gives the correct temperature? 🙂 > [@Albenss](#): > > But on the Room Temperature Widget, it’s the temperature of one of the other sensors that is used, The widget averages all the room sensors 🙂 ---
**Author:** ![Albenss](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/albenss/32/3916_2.png) [@Albenss](https://community.gladysassistant.com/u/Albenss)\ **Post date:** [October 13, 2021, 8:08am UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/3 "2021-10-13T08:08:57Z")
So, if I understand correctly, the temperature value of Xiaomi sensors other than the temperature sensors is the temperature of the printed circuit board. > The temperature reporting feature is actually the _internal_ temperature of the device, **not** the ambient air temperature, and is only reported once an hour. So it is not useful. – [link](https://community.smartthings.com/t/xiaomi-aqara-door-window-sensor-temperature-reporting/172573) This is mainly used as an indication because the sensors are designed to operate within a temperature range of -10 to 45°C (from memory). Therefore, I think it would be necessary to have the possibility to select a list of devices in the box to average them, as not everything can be used currently. ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [October 13, 2021, 8:17am UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/4 "2021-10-13T08:17:00Z")
Ok, I understand The problem, in my opinion, is not from there, it’s more of a feature classification issue (these sensors are not really temperature sensors in the « ambient air temperature » sense, they are device operating temperature sensors) Because this box is not the only place where we average temperatures. Example: In the chat, you can tell Gladys: « Give me the temperature of the living room », and she will answer. To do this, she averages the temperature sensors in the room, and since it’s not in the UI, she must have a way to know which sensors are ambient temperature sensors, and which sensors are « internal » temperature sensors. So, to solve your problem, we need to create a new device\_feature category (something like « internal temperature » / « internal\_cpu\_temperature »), and in the Zigbee2mqtt integration, we need to re-classify these features so that Gladys does not confuse them with ambient temperature sensors. I created an issue: [https://github.com/GladysAssistant/Gladys/issues/1321](https://github.com/GladysAssistant/Gladys/issues/1321) @cicoub13 @VonOx to get you in the loop 🙂 ---
**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\ **Post date:** [April 28, 2022, 10:31pm UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/5 "2022-04-28T22:31:40Z")
Has this issue been resolved? I saw that the topic was closed on GitHub but I still have the problem. Or maybe I didn’t understand everything! Or how to modify the device feature of these opening sensors? ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [April 29, 2022, 8:25am UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/6 "2022-04-29T08:25:29Z")
Yes, this issue has been resolved. However, it is possible that you have devices whose temperature is classified as « Temperature » when it should be classified as « Circuit Temperature. » Which integration and device are affected? ---
**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\ **Post date:** [April 29, 2022, 9:00am UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/7 "2022-04-29T09:00:28Z")
I have placed a room temperature box. And in the room I have 2 sensors, 1 Xiaomi Aqara temperature sensor and 1 Xiaomi Aqara opening sensor. So the temperature of the opening sensor is wrong, well it does not represent the ambient temperature. I think that this data is misclassified In Zigbee2Mqtt it is just indicated as temperature. By browsing the parameters in Zigbee2Mqtt I found how to set up a filter and not send this value to solve my problem. ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [April 29, 2022, 9:18am UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/8 "2022-04-29T09:18:40Z")
It would be necessary to change the type of this device in the Zigbee2mqtt integration. I tag @cicoub13 and @AlexTrovato 🙂 @Will_71 Maybe you could create an issue on the project’s Github to keep track of this problem? ---
**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\ **Post date:** [April 29, 2022, 9:32am UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/9 "2022-04-29T09:32:35Z")
@pierre-gilles ok I’ll take care of it tonight edit: here you go I’ve created the github issue > > > modification du type température du capteur d'ouverture de porte, pour ne pas êt…re pris en compte dans la fonction température de la pièce > > !\[image\](https://user-images.githubusercontent.com/11477113/165932727-4dd7cfec-76a1-47b6-bd62-8a5464f06d6e.png) > > > https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/7 ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [May 3, 2022, 7:06pm UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/10 "2022-05-03T19:06:54Z")
In my view, the XIAOMI MCCGQ11LM sensor has a temperature sensor (see [MCCGQ11LM Door sensor · Issue #4680 · Koenkk/zigbee2mqtt · GitHub](https://github.com/Koenkk/zigbee2mqtt/issues/4680)) which is not the hardware temperature, but rather the air temperature. ---
**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\ **Post date:** [May 4, 2022, 7:05pm UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/12 "2022-05-04T19:05:56Z")
That’s what I think too. Which is quite absurd because in the majority of cases the open/close sensor is placed on a door / a window… so the temperature doesn’t reflect the room’s temperature ^^ ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [May 4, 2022, 7:07pm UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/13 "2022-05-04T19:07:35Z")
I dare to believe that! ---
**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\ **Post date:** [May 4, 2022, 7:48pm UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/14 "2022-05-04T19:48:52Z")
So we can recalibrate (thanks @AlexTrovato for the info) the temperature of this sensor or stop sending this value to MQTT. That’s actually what I did, so this temperature no longer affects the calculation of the room temperature. ---
**Author:** ![Albenss](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/albenss/32/3916_2.png) [@Albenss](https://community.gladysassistant.com/u/Albenss)\ **Post date:** [May 4, 2022, 8:09pm UTC](https://community.gladysassistant.com/t/bug-widget-temperature-de-la-piece/6593/15 "2022-05-04T20:09:27Z")
It’s indeed the only proper way to avoid sending the information, since depending on the type of window/door frame the temperature can vary quite a bit — I’ve seen cases of a correction difference of -7 to -3°C within a few hours. Isn’t it possible to ignore this temperature value for these devices on the Gladys side?