# Compatibility of Gladys with Thombox?

**URL:** <https://community.gladysassistant.com/t/compatibilite-gladys-avec-thombox/10165>\
**Category:** Configuration\
**Created:** [March 31, 2026, 7:19am UTC](https://community.gladysassistant.com/t/compatibilite-gladys-avec-thombox/10165 "2026-03-31T07:19:48Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Labourse974](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/labourse974/32/20600_2.png) [@Labourse974](https://community.gladysassistant.com/u/Labourse974)\
**Post date:** [March 31, 2026, 7:19am UTC](https://community.gladysassistant.com/t/compatibilite-gladys-avec-thombox/10165/1 "2026-03-31T07:19:48Z")

</div>

Hello everyone, I’m new here and I have a problem.

I have a Thombox that uses ARW gateways:

![avidsen-protocols](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/3/b/3bdea692361f6c758d14df385b8d301b2264b049.jpeg)

The issue is that to configure my home automation, I was using Zipato, which has simply closed its servers…

I am looking for a solution to regain access to my home automation system without having to replace everything, but I don’t know much about it.

I understood that Gladys is a gateway that could enable this communication, but I don’t think it’s compatible with the Thombox.

Can anyone help me?

Thanks in advance 🙏

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [March 31, 2026, 6:18pm UTC](https://community.gladysassistant.com/t/compatibilite-gladys-avec-thombox/10165/2 "2026-03-31T18:18:19Z")

</div>

Hello @Labourse974 and welcome to Gladys!

Unfortunately, Gladys is not compatible with Thombox.

---

<div class="post-metadata">

**Author:** ![Labourse974](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/labourse974/32/20600_2.png) [@Labourse974](https://community.gladysassistant.com/u/Labourse974)\
**Post date:** [April 2, 2026, 5:38am UTC](https://community.gladysassistant.com/t/compatibilite-gladys-avec-thombox/10165/3 "2026-04-02T05:38:57Z")

</div>

Hello @pierre-gilles,

Thank you for your response. Do you have a solution?

Best regards

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [April 2, 2026, 7:11am UTC](https://community.gladysassistant.com/t/compatibilite-gladys-avec-thombox/10165/4 "2026-04-02T07:11:00Z")

</div>

You should check if your Thombox has an API that you can control via Gladys.

Otherwise, look into Node-RED, there might be a plugin!