# The madness and confusion of energy monitoring

**URL:** <https://community.gladysassistant.com/t/die-irren-und-wirren-der-energieuberwachung/11413>\
**Category:** Développement\
**Created:** [October 25, 2026, 3:45pm UTC](https://community.gladysassistant.com/t/die-irren-und-wirren-der-energieuberwachung/11413 "2026-10-25T15:45:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ruegerth](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/r/dbc845/32.png) [@ruegerth](https://community.gladysassistant.com/u/ruegerth)\
**Post date:** [October 25, 2026, 3:45pm UTC](https://community.gladysassistant.com/t/die-irren-und-wirren-der-energieuberwachung/11413/1 "2026-10-25T15:45:42Z")

</div>

Hello everyone,  
I’ve hit a snag here, and only the specialists can help me now. I’m stuck.

I developed the external integration for the Wattwächter. An IR head that reads German electricity meters:

[https://community.gladysassistant.com/](https://community.gladysassistant.com/)

 ![wattwaechter](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/c/5/c589d8386a01fa19439657cd3fdedb6cb72afcd0.png)

The device resulting from this also provides an index for energy monitoring. The consequence is that this device also correctly appears as a meter in the energy monitoring:

 ![wattwaechter2](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/7/d/7dcb1c558893040978b9ebfa8364a94412b79737.png)

I can assign a contract to this electricity meter as usual, configure the contract, etc. etc.

But as the overall result, it is displayed:  
«&nbsp;No device has been assigned to this meter yet&nbsp;»

But the device is itself, right?  
What can I do now, because in the energy monitoring widget, no suitable device is displayed for me.

Currently, I only have one option: to include a separate energy monitoring widget with the external integration, because the device provides the meter via index, but also, as visible above, the consumption and costs in 30-minute steps.

Or have I configured or set something up incorrectly?

No idea, can someone from the specialists here give me a hand?

That would be super nice, thank you in advance,

Best regards  
Tom

---

<div class="post-metadata">

**Author:** ![mutmut](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/mutmut/32/14064_2.png) [@mutmut](https://community.gladysassistant.com/u/mutmut)\
**Post date:** [October 25, 2026, 4:00pm UTC](https://community.gladysassistant.com/t/die-irren-und-wirren-der-energieuberwachung/11413/2 "2026-10-25T16:00:52Z")

</div>

Hi Tom,  
I don’t know if this can help you, but we’ll see.

For my part, I retrieve the energy information (indices for simplicity) directly via our smart meter (French).  
It’s the same principle as yours: indices are sent back, and the 30-minute consumption (Verbrauch) and 30-minute cost are calculated by Gladys.

To get the costs, I created a new MQTT meter from the energy tracking integration.  
Then the energy contract is associated with this meter, and I link my Linky indices to this new meter.  
And then I display the energy tracking of the indices but not of the new meter.

What I mean is that the contract is not on my indices but on a parent meter.

Let me know if this is clear to you.

---

<div class="post-metadata">

**Author:** ![ruegerth](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/r/dbc845/32.png) [@ruegerth](https://community.gladysassistant.com/u/ruegerth)\
**Post date:** [October 25, 2026, 4:09pm UTC](https://community.gladysassistant.com/t/die-irren-und-wirren-der-energieuberwachung/11413/3 "2026-10-25T16:09:40Z")

</div>

@mutmut Thanks for the quick tip, I’ll give that a try.

Best regards

Tom
