# Domoticz through scenes

**URL:** <https://community.gladysassistant.com/t/domoticz-via-les-scenes/7115>\
**Category:** Présentations\
**Created:** [March 29, 2022, 8:04pm UTC](https://community.gladysassistant.com/t/domoticz-via-les-scenes/7115 "2022-03-29T20:04:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kazuke](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/k/2acd7d/32.png) [@kazuke](https://community.gladysassistant.com/u/kazuke)\
**Post date:** [March 29, 2022, 8:04pm UTC](https://community.gladysassistant.com/t/domoticz-via-les-scenes/7115/1 "2022-03-29T20:04:23Z")

</div>

Good evening,  
I have been following the project for quite some time now and I ended up adopting Gladys. 😃  
Thanks to all the contributors.  
Having a Domoticz installation on Rapberry, I can easily turn on/off an RF433 plug controlled by Domoticz via a scene (HTTP request)  
_From the domoticz api: [http://192.168.0.106:8080/json.htm?type=command&param=switchlight&idx=2&switchcmd=Toggle](http://192.168.0.106:8080/json.htm?type=command&param=switchlight&idx=2&switchcmd=Toggle)_  
However, there is no possibility to create a device in the dashboard, I have to go through the Scene tab to perform the On/Off actions. It’s not a problem in itself, but it would be more user-friendly.  
Again, thank you for this amazing work offered by the community.

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [March 29, 2022, 8:22pm UTC](https://community.gladysassistant.com/t/domoticz-via-les-scenes/7115/2 "2022-03-29T20:22:55Z")

</div>

Hello @kazuke and welcome!

> [@kazuke](#):
>
> I’ve been following the project for quite some time and I ended up adopting Gladys. 😃

Awesome 🙂

> [@kazuke](#):
>
> However, there’s no way to create a device in the dashboard, you have to go through the Scene tab to perform On/Off actions.

Yes, it is possible! You can create a «&nbsp;virtual&nbsp;» device in the MQTT integration in Gladys (even if you don’t use MQTT), and then trigger your scene on a state change of the virtual device.

This way you will be able to place your device on the dashboard 😉

---

<div class="post-metadata">

**Author:** ![kazuke](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/k/2acd7d/32.png) [@kazuke](https://community.gladysassistant.com/u/kazuke)\
**Post date:** [March 29, 2022, 10:23pm UTC](https://community.gladysassistant.com/t/domoticz-via-les-scenes/7115/3 "2022-03-29T22:23:53Z")

</div>

Okay, thanks for your quick response. 👍