# Gladys Assistant 4.2 is available with Zigbee2mqtt compatibility! šŸš€ **URL:** \ **Category:** ActualitĆ©s\ **Created:** [April 1, 2021, 6:26am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225 "2021-04-01T06:26:26Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [April 2, 2021, 4:46am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/41 "2021-04-02T04:46:40Z")
Yes, it was me who used the webp. Since it was displayed on airtable, I thought it was supported. Iā€™ll make the change and submit the PR. Thanks @cicoub13 for your quick response! ---
**Author:** ![Albenss](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/albenss/32/3916_2.png) [@Albenss](https://community.gladysassistant.com/u/Albenss)\ **Post date:** [April 2, 2021, 7:41am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/42 "2021-04-02T07:41:16Z")
Hello, Small question about integrating Zigbee2Mqtt into scenes, in my case I have two Aquara switches (reference [WXKG01LM](https://www.zigbee2mqtt.io/devices/WXKG01LM.html)) and a cube ([MFKZQ01LM](https://www.zigbee2mqtt.io/devices/MFKZQ01LM.html)) from the same brand. If I want to use scenes triggered with my buttons, for example for a single click I do this: ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/5/5c19858da7b3f24cba364f8ca9728e5e685e35b5.png) Now if I want to use a triple click on my button, I cannot insert the value Ā« triple Ā» in the value box since it only seems to take a number, I tried to do it with the value 3 directly but it does not work. How to do for devices having, for value stored in gladys, a string? ---
**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\ **Post date:** [April 2, 2021, 8:39am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/43 "2021-04-02T08:39:54Z")
Hello, you can look at this discussion [ScĆØne avec un bouton (double ou simple clic) - #32 par cicoub13](https://community.gladysassistant.com/t/scene-avec-un-bouton-double-ou-simple-clic/6167/32) I have integrated single/double/long clicks but not all cases. I will soon make a PR to standardize the management between the Xiaomi service and Zigbee + add a selector in the scenes (rather than numerical values). ---
**Author:** ![Terdious](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/terdious/32/6316_2.png) [@Terdious](https://community.gladysassistant.com/u/Terdious)\ **Post date:** [April 2, 2021, 10:52am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/44 "2021-04-02T10:52:02Z")
Itā€™s good indeed, I successfully retrieved the zzh key! I just tested it with 2 motion sensors (Mi Motion Sensor model RTCGQ01LM) and 2 window and door sensors (Mi Window and Door Sensor model MCCGQ01LM). It works very well. What ease of integration with Gladys. A big bravo to @cicoub13 and @Reno, and of course to the beta testers, for this beautiful and welcome integration!! ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [April 2, 2021, 3:40pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/45 "2021-04-02T15:40:01Z")
> [@pierre-gilles](#): > > If you want to do it, you have to clone the v4-website repo, then create a `.env` file at the root of the project with the following content: Hi, Sorry, I sometimes use git, but rarely GitHub across multiple projects, so Iā€™m a bit stuck ā˜¹ - I cloned the v4 site āœ… - I updated the documentation āœ… - The integration page displays the new devices āœ… - The images are _blur_ though ā“ - I committed on my clone āœ… - Despite sorting the Airtable table, itā€™s not sorted in the documentation ā“ - I donā€™t know how, [from this commit](https://github.com/LM1LC3N7/v4-website/commit/9280891ea0b55143d67b625c6e15381609314607), to propose a PR ā“ ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/a/aa02fadddee2bf302bc808f72dd2386c9ee07cdd.png) ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [April 2, 2021, 4:57pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/46 "2021-04-02T16:57:11Z")
> [@lmilcent](#): > > I donā€™t know how, [starting from this commit](https://github.com/LM1LC3N7/v4-website/commit/9280891ea0b55143d67b625c6e15381609314607), propose a PR You go to the Pull Request tab and create a new PR by selecting the correct branch (normally GitHub will suggest it) ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [April 2, 2021, 4:58pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/47 "2021-04-02T16:58:09Z")
> [@lmilcent](#): > > Despite the Airtable table sorting, it is not sorted in the documentation There is no sorting management. Blur on my side as well ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [April 2, 2021, 5:15pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/48 "2021-04-02T17:15:57Z")
> [@VonOx](#): > > Blur also on my side Is this normal behavior during the development of this site @pierre-gilles? ---
**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\ **Post date:** [April 3, 2021, 9:38am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/50 "2021-04-03T09:38:35Z")
After a few quick tests, several devices were recognized immediately (all Aqara): door opening sensor water leak sensor mini switch One unrecognized device: Light Sensor I was able to open an issue directlyā€¦ Top! ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [April 3, 2021, 10:15am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/51 "2021-04-03T10:15:28Z")
Are you sure @guim31? Because the open issue concerns a switch > **[Xiaomi Aqara Opple Wireless Scene Switch 4 Button WXCJKG12LM Zigbee...](https://zigbee.blakadder.com/Xiaomi_WXCJKG12LM.html)** > > Zigbee ID: lumi.remote.b486opcn01 - Xiaomi WXCJKG12LM compatibility with third party gateways ---
**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\ **Post date:** [April 3, 2021, 10:42am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/52 "2021-04-03T10:42:31Z")
Oops! I confirm itā€™s the switch! šŸ‘ The light sensor doesnā€™t work either: Iā€™m out of batteries! ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [April 3, 2021, 11:34am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/53 "2021-04-03T11:34:56Z")
@lmilcent This only happens in dev mode (I couldnā€™t find out why) The build is OK ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/1/16c6e1017c9c169095aba652f60ec168588eab46.jpeg) ---
**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\ **Post date:** [April 3, 2021, 4:55pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/54 "2021-04-03T16:55:50Z")
Quick question by the way, I would really like to get my Aqara bulbs ([Aqara ZNLDP12LM control via MQTT | Zigbee2MQTT](https://www.zigbee2mqtt.io/devices/ZNLDP12LM.html)) working But I donā€™t even see them appear during the device scan. I did put them in pairing mode (switch on/off 5 times \> bulb blinking). I see nothing. Did I miss something? EDIT: could this help? [Aqara Zigbee LED Bulb E27 - Hardware - Home Assistant Community](https://community.home-assistant.io/t/aqara-zigbee-led-bulb-e27/85631) Thanks in advance! @VonOx sorry for the duplicate on Github, I think I clicked by mistake from my mobile phone! ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [April 3, 2021, 6:46pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/55 "2021-04-03T18:46:32Z")
> [@guim31](#): > > But I canā€™t even see them appearing during the device scan. I did put them in pairing mode (switch on/off 5 times \> bulb flashing). I see nothing. > > Did I miss something? Off the top of my head, I think if thereā€™s nothing in Gladys, it means the pairing didnā€™t happen. (This needs to be investigated) > [@guim31](#): > > Sorry for the duplicate on GitHub, I think I clicked by mistake from my mobile phone! No problem, the second one was more complete šŸ˜‰ ---
**Author:** ![Albenss](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/albenss/32/3916_2.png) [@Albenss](https://community.gladysassistant.com/u/Albenss)\ **Post date:** [April 3, 2021, 7:03pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/56 "2021-04-03T19:03:42Z")
Hello, You can try to connect to your\_ip:8080, which will allow you to access the zigbee2mqtt web interface. You can check the logs (to see if there is a problem) or even try to associate from this interface. If it is well connected via Zigbee2mqtt, you should see it appear on Gladys afterwards. ---
**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\ **Post date:** [April 4, 2021, 7:36am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/57 "2021-04-04T07:36:43Z")
Okay, thank you, I will do some tests from this page! > [@VonOx](#): > > Hot like that I think that if there is nothing in Gladys it is that the pairing has not been done. (It needs to be investigated) Okay, I will check the logs to see if I find anythingā€¦ ---
**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\ **Post date:** [April 4, 2021, 8:19am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/58 "2021-04-04T08:19:49Z")
Hereā€™s what I see on this side ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/b/b96d5183e8fb8d520f052ae06aaf7e83002440cc.png) ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/6/6eab08571fc28d13b7517b7e6f7e7ee7a030bddf.png) ---
**Author:** ![Jean34](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/jean34/32/3349_2.png) [@Jean34](https://community.gladysassistant.com/u/Jean34)\ **Post date:** [April 4, 2021, 8:55am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/59 "2021-04-04T08:55:43Z")
Hello everyone, I donā€™t know about you, but I donā€™t have the zigbee2mqtt integration in Gladys+ ![Screenshot_2021-04-04 Gladys Assistant](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/b/bf2a22300c94a736b3a2aa07ed07a2391865b9ad.jpeg) However, on the IP I have it ![Screenshot_2021-04-04 Gladys Assistant(1)](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/5/5136fb216b50d2c369431da23c11b7a512a0bfef.jpeg) Is it because I was in a hurry and I ran the commands from @VonOx > [@Gladys Assistant 4.2 est disponible avec la compatibilitĆ© Zigbee2mqtt ! rocket](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/36?u=jean34): > > Pour ceux qui sont impatients et qui nā€™ont pas peur du SSH, vous pouvez rapidement fixer Dā€™abord on stop & supprime le contenur actuel docker stop gladys && docker rm gladys Puis on recrĆ©e le conteneur avec cette fois ci lā€™argument qui manque docker run -d \ --log-opt max-size=10m \ --restart=always \ --privileged \ --network=host \ --name gladys \ -e NODE\_ENV=production \ -e SERVER\_PORT=80 \ -e TZ=Europe/Paris \ -e SQLITE\_FILE\_PATH=/var/lib/gladysassistant/gladys-production.db \ -v /var/rā€¦ To go into detail, I formatted my SD card, I sent the latest image proposed in the documentation (by the way, the web page is really great, well done @VonOx) once everything was installed, I did not configure Gladys, I immediately removed it to run the docker command from @VonOx so that zigbee2mqtt works directly. Thatā€™s it, otherwise everything is fine, the installation went very well and I will see if it takes my door/window opening detectors. ---
**Author:** ![Jean34](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/jean34/32/3349_2.png) [@Jean34](https://community.gladysassistant.com/u/Jean34)\ **Post date:** [April 4, 2021, 9:18am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/60 "2021-04-04T09:18:10Z")
EDIT: well I spoke too soon, yet everything was fine last night. But now the zigbee2mqtt container keeps restarting in a loop, here are the logs When trying to insert the logs here I hit a forum limitation @pierre-gilles Body is limited to a maximum of 32,000 characters; there are 75,477. So Iā€™ll put it on pastebin > @cicoub13 if you have any ideas ā€¦ ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [April 4, 2021, 9:33am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225/61 "2021-04-04T09:33:02Z")
> [@Jean34](#): > > Is it because I was in a hurry and executed the commands of @VonOx no šŸ˜ itā€™s not my fault for once We are all concerned, the problem has already been reported (I donā€™t remember where), I created an issue for PG [https://github.com/GladysAssistant/gladys-gateway/issues/80](https://github.com/GladysAssistant/gladys-gateway/issues/80) > [@Jean34](#): > > When trying to insert the logs here, I encountered a forum limitation @pierre-gilles > Body is limited to a maximum of 32,000 characters; there are 75,477. 32,000 is not bad already šŸ˜… Your error is the same one that keeps recurring and concerns zigbee2mqtt. - Is the dongle not being used by another container? - Is the MQTT container launched and available? - Have you changed the permissions on /var/lib/gladysassistant? [Previous page](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225.md?page=2) [Next page](https://community.gladysassistant.com/t/gladys-assistant-4-2-est-disponible-avec-la-compatibilite-zigbee2mqtt/6225.md?page=4)