# Gladys Assistant 4.28: Sensor state expiration, new Zigbee devices, and more! **URL:** \ **Category:** Actualités\ **Created:** [September 11, 2023, 2:10pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352 "2023-09-11T14:10:43Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [September 11, 2023, 2:10pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/1 "2023-09-11T14:10:43Z")
Hello everyone! It’s Monday, time for a new Gladys release 😄 And there are lots of new features in Gladys Assistant 4.28!! **Sensor state expiration** From now on, « old » sensor states will no longer be displayed on the dashboard, and will be replaced by an indication that the state is no longer up to date: ![Screenshot 2023-09-11 at 15.55.56](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/7/76238ec06a3141d68aeb00c09ca8fc40b0b26d01.png) Handy to find sensors that are no longer sending values! The default delay is **48 hours** and can be changed in « Settings » =\> « System »: ![Screenshot 2023-09-11 at 10.40.06](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/9/947a3f349cc7d74fcdfb3bada22e0d6ac8a545c2.png) **Execute a scene from the dashboard** New widget on the dashboard added by @Lokkye, it is now possible to control scenes from the dashboard: ![Screenshot 2023-09-11 at 15.57.59](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/a/aab37d2b6fbad378b2fcec4b4765321e5476caea.png) Super handy, thanks @Lokkye for this development 🙌 **New Zigbee devices** 2 new Zigbee devices are now supported by Gladys thanks to the work of @_Will_71: - [The Xiaomi DJT11LM vibration/shock sensor](https://www.domadoo.fr/fr/peripheriques/4667-aqara-capteur-de-vibration-zigbee-djt11lm-192784000113.html?domid=17) - The HEIMAN HM1RC-2-E remote with support for the « Emergency », « Disarm alarm », « Arm day zones », « Arm alarm » buttons **Deprecation of the eWelink integration** Unfortunately, the eWelink integration no longer works because of a change on the eWelink API side. I’m looking for someone who would help by re-coding the current service with the new API: > [@Service ewelink en erreur](https://community.gladysassistant.com/t/service-ewelink-en-erreur/8323/17?u=pierre-gilles): > > Merci @tiboys je viens de voir, par contre effectivement @ProtZ a raison, la librairie n’est plus fonctionnelle, la conclusion sur le topic que tu cites est : So in summary - its time to give up trying to make this project work (as it uses the old v1 endpoints and an outdated method of connection with a password stored in plain text in your code) and move to the meow common and more secure OAuth2.0 authorisation flow with the resultant token to use as a bearer token in future requests. Même … **Fixes** - The OpenAI ChatGPT integration is now clearer to use ( [Improve OpenAI ChatGPT screen to remove alpha example by Pierre-Gilles · Pull Request #1869 · GladysAssistant/Gladys · GitHub](https://github.com/GladysAssistant/Gladys/pull/1869)) - Binary control buttons no longer bug when multiple widgets control the same device ( [Fix binary state when the same deviceFeatures is displayed multiple times by Pierre-Gilles · Pull Request #1862 · GladysAssistant/Gladys · GitHub](https://github.com/GladysAssistant/Gladys/pull/1862) ) - The « Room devices » widget correctly refreshes the list of features displayed in edit mode ( [Devices in room widget should correctly refresh list of device features by Pierre-Gilles · Pull Request #1866 · GladysAssistant/Gladys · GitHub](https://github.com/GladysAssistant/Gladys/pull/1866) ) - The MQTT integration interface better handles errors related to a network issue or a Gladys restart ( [MQTT: Add Network error message in UI by Pierre-Gilles · Pull Request #1864 · GladysAssistant/Gladys · GitHub](https://github.com/GladysAssistant/Gladys/pull/1864) ) - The « analog clock » widget is now better displayed on small screens ( [Clock widget: Fix analog clock size on small screens by Pierre-Gilles · Pull Request #1871 · GladysAssistant/Gladys · GitHub](https://github.com/GladysAssistant/Gladys/pull/1871) ) - Links to the forum now redirect to the English forum for Gladys users in the English language ( [Add links to english forum in UI and Github repository by Pierre-Gilles · Pull Request #1873 · GladysAssistant/Gladys · GitHub](https://github.com/GladysAssistant/Gladys/pull/1873) ) The full changelog is available [here](https://github.com/GladysAssistant/Gladys/releases/tag/v4.28.0). Thanks to everyone who contributed to this release 🙌 **How to update?** If you installed Gladys with the official Raspberry Pi OS image, your instances will update **automatically** within the coming hours. This can take up to 24h, don’t panic. If you installed Gladys with Docker, make sure you are using Watchtower ( See the [documentation](https://gladysassistant.com/fr/docs/installation/docker#mise-%C3%A0-jour-automatique-avec-watchtower) ) ---
**Author:** ![cce66](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/c/8797f3/32.png) [@cce66](https://community.gladysassistant.com/u/cce66)\ **Post date:** [September 11, 2023, 7:06pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/2 "2023-09-11T19:06:29Z")
Hello, Is anyone else having the bug? I updated to 4.28 and since then… ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/9/916c307bad4de6ffcf043e3bc0b3e6cb9de03087.png) ---
**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\ **Post date:** [September 11, 2023, 7:10pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/3 "2023-09-11T19:10:01Z")
There was recently (previous update?) a problem with MQTT, normally you just need to reconnect by re-entering your login credentials, at worst you just re-enter the password in plain text and there you go, it should work. ---
**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\ **Post date:** [September 11, 2023, 7:10pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/4 "2023-09-11T19:10:03Z")
No bug on my end ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/6/61e6b7cf06dc93f19c3d48c3d75a775cddcdf99a.png) ---
**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\ **Post date:** [September 11, 2023, 7:10pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/5 "2023-09-11T19:10:30Z")
Also check the logs if needed ---
**Author:** ![Terdious](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/terdious/32/6316_2.png) [@Terdious](https://community.gladysassistant.com/u/Terdious)\ **Post date:** [September 11, 2023, 7:52pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/6 "2023-09-11T19:52:22Z")
Everything is ---
**Author:** ![cce66](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/c/8797f3/32.png) [@cce66](https://community.gladysassistant.com/u/cce66)\ **Post date:** [September 11, 2023, 7:55pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/7 "2023-09-11T19:55:56Z")
After removing these 3 containers, then restarting the Gladys container 1872684d9f7e eclipse-mosquitto:2.0.15 « /docker-entrypoint.… » 32 seconds ago Up 25 seconds eclipse-mosquitto 2755db8cc420 koenkk/zigbee2mqtt:latest « docker-entrypoint.s… » About a minute ago Up About a minute gladys-z2m-zigbee2mqtt 5ff4c4c2dde6 eclipse-mosquitto:2.0.15 « /docker-entrypoint.… » About a minute ago Up About a minute gladys-z2m-mqtt I can see it fine ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/3/34ae238ea238671a47912b8eaefb5f710e9388eb.png) But it’s impossible to restore the username and password I had before! No matter how many times I enter the desired username and password and save, it doesn’t work — it re-displays the username, a reboot changes nothing… And it’s impossible to connect from Node-RED to the broker… Same after deleting the Gladys container and reinstalling with docker run -d –log-driver json-file –log-opt max-size=10m –cgroupns=host –restart=always –privileged –network=host –name gladys -e NODE\_ENV=production -e SERVER\_PORT=80 -e TZ=Europe/Paris -e SQLITE\_FILE\_PATH=/var/lib/gladysassistant/gladys-production.db -v /var/run/docker.sock:/var/run/docker.sock -v /var/lib/gladysassistant:/var/lib/gladysassistant -v /dev:/dev -v /run/udev:/run/udev:ro gladysassistant/gladys:v4 I’m stuck here and it pisses me off to see that nothing works anymore 😭 ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [September 12, 2023, 6:10am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/8 "2023-09-12T06:10:26Z")
Hi @cce66! Can you create a specific topic and we’ll discuss it? We’ll find something! ---
**Author:** ![spenceur](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/spenceur/32/1961_2.png) [@spenceur](https://community.gladysassistant.com/u/spenceur)\ **Post date:** [September 12, 2023, 6:23am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/9 "2023-09-12T06:23:52Z")
Hello ! Since the update I have an « issue ». I have a sensor managed manually (schedule or by voice) depending on whether we have guests at our place, we don’t run certain automations. This variable is of boolean type, but we display it on the dashboard so that at a glance we can see its state. However with the new feature that ---
**Author:** ![tiboys](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tiboys/32/17668_2.png) [@tiboys](https://community.gladysassistant.com/u/tiboys)\ **Post date:** [September 12, 2023, 6:38am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/10 "2023-09-12T06:38:24Z")
> [@spenceur](#): > > I have a sensor managed manually (calendar or by voice) depending on whether we have guests at our place, we don’t do certain automations. I integrated it as a button that I activate manually or automatically via calendar scenes. Same for holidays. ![Capture d'écran 2023-09-12 à 08.33.42](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/d/d6562d4a617a60a05f845615669627ac9b96f549.png) Handy (and reassuring) for smoke detectors 😋 ![Capture d'écran 2023-09-12 à 08.32.30](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/2/2a1c98485a72b49806b0e32cdf085041cc91014c.png) By the way, great update @pierre-gilles 👍 Launching a scene directly from the Dashboard will allow me to remove some that use fake devices (MQTT button that triggers a scene). 😍 ---
**Author:** ![spenceur](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/spenceur/32/1961_2.png) [@spenceur](https://community.gladysassistant.com/u/spenceur)\ **Post date:** [September 12, 2023, 6:42am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/11 "2023-09-12T06:42:30Z")
> [@tiboys](#): > > I integrated it as a button that I activate manually or automatically via calendar scenes. Same for vacations. Quite the opposite of how I use it ^^ I don’t want « write » access, only « read » access on this state By the way, unrelated, but I see a badge reader on your dashboard — what are you using? 🙂 Thanks in advance! ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [September 12, 2023, 7:10am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/12 "2023-09-12T07:10:03Z")
> [@spenceur](#): > > Is it possible to exclude certain devices from this process? Yes, that’s something that can be added 🙂 @Terdious has also requested it. If, while waiting for this feature, it bothers you, go to the settings and set the expiration to « 1000 days », that way the states will never expire ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [September 12, 2023, 8:42am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/13 "2023-09-12T08:42:49Z")
Thanks @pierre-gilles for this version which brings me a lot of improvements that change everything! Thanks to value expiration in the interface, I can super easily detect my battery-less sensors 🎉 And with the ---
**Author:** ![cce66](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/c/8797f3/32.png) [@cce66](https://community.gladysassistant.com/u/cce66)\ **Post date:** [September 12, 2023, 8:44am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/14 "2023-09-12T08:44:11Z")
> [@pierre-gilles](#): > > Hi @cce66! Could you create a specific thread and we’ll discuss it? We’ll find a solution! Damn cache, the night brings advice even when it’s short! 😉 This morning, I test Gladys’ connection from Edge, I change the broker name and the password and… it works! 🥳 I go back to Firefox, I refresh and it’s correctly applied! It’s unbelievable that Firefox forces these entries on its own! 😡 Would it be possible to add a message saying that if the save doesn’t occur you should clear the cache or connect from another browser (in the first line) like « If the save doesn’t happen, consider clearing the browser cache or try saving from another browser » ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/f/f113bc074fd28fb57d61bd89294538e4cbbe3ed1.png) Anyway, bug resolved in any case! 😊 ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [September 12, 2023, 8:47am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/15 "2023-09-12T08:47:26Z")
Two minor improvements I suggest: 1. Apply data expiration to cameras as well (the image displayed on my dashboard dates from the end of August ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [September 12, 2023, 9:00am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/16 "2023-09-12T09:00:24Z")
> [@lmilcent](#): > > Thank you @pierre-gilles for this version which brings me a lot of improvements that change everything! Thanks for the feedback and for sharing a screenshot, it’s a pleasure to see! 😃 Your dashboard is very neat 👏 > [@cce66](#): > > I go back to Firefox, I refresh and it’s properly applied! It’s crazy that Firefox forces this information on its own! 😡 Would you happen to have an « auto-fill » in Firefox that replaces the information at the last minute? > [@lmilcent](#): > > Apply data expiration to cameras as well (the image shown on my dashboard dates from the end of August) Ok, I created an issue so I remember: [Dashboard: Camera image should not be displayed if not recent · Issue #1878 · GladysAssistant/Gladys · GitHub](https://github.com/GladysAssistant/Gladys/issues/1878) > [@lmilcent](#): > > have a bigger difference in the icons for an open or closed door or window. You can barely see the difference. Otherwise, we could just add a label « open » and « closed ». It’s not the first time we’ve changed the icon, and each time I get complaints because it’s too small 🙂 ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [September 12, 2023, 9:06am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/17 "2023-09-12T09:06:12Z")
> [@pierre-gilles](#): > > Otherwise, we could just put a label « open » and « closed ». Honestly, I’m up for it — the green and orange label is very clear. Or like motion detectors: « open … ago » or « closed … ago » ---
**Author:** ![tiboys](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tiboys/32/17668_2.png) [@tiboys](https://community.gladysassistant.com/u/tiboys)\ **Post date:** [September 12, 2023, 9:22am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/18 "2023-09-12T09:22:30Z")
[quote=« pierre-gilles, post:16, topic:8352 »] Otherwise, we could just put a label « open » and « closed ». It’s not the first time we’ve changed the icon, and ---
**Author:** ![tiboys](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tiboys/32/17668_2.png) [@tiboys](https://community.gladysassistant.com/u/tiboys)\ **Post date:** [September 12, 2023, 9:27am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/19 "2023-09-12T09:27:39Z")
> [@spenceur](#): > > By the way, unrelated, but I see a badge reader on your dashboard, what are you using? 🙂 I built myself a badge reader with an ESP8266 and an RFID reader, all housed in an RPI case. Status feedback with red and green LEDs and a buzzer when a badge is presented. ![Capture d'écran 2023-09-12 à 11.26.53](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/a/a4e9acd57b58e4bb2a64e7fcc8dd7fc53f67dfa2.png) ---
**Author:** ![cce66](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/c/8797f3/32.png) [@cce66](https://community.gladysassistant.com/u/cce66)\ **Post date:** [September 12, 2023, 9:34am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352/20 "2023-09-12T09:34:28Z")
> [@pierre-gilles](#): > > > [@cce66](#): > > > > I go back to firefox, I refresh and it’s properly taken into account! It’s shocking that Firefox forces those pieces of information by itself! 😡 > > Wouldn’t you happen to have an « auto-fill » of information in Firefox that replaces them at the last minute? I probably answered « yes » mechanically to a password save prompt for that window and indeed in firefox about:logins I found a login saved in March but not with the « gladys » values/password returned at the start of my post nor the one I wanted to inject, so gladys re-displays the generated username/password during the recreation of the container then firefox replaces them on the fly with the stored ones but without warning that it replaced them! Creepy behavior! 🤔 So the warning message should be completed « If the save does not happen, consider clearing the browser cache or try saving from another browser (in Firefox check by typing about:logins in the address bar to see if there isn’t a username/password saved) Besides, I suppose the same will apply for the docker node-red module that @Lokkye develops or other places in Gladys where there is this risk of « auto-fill » saving, I’ll try to remember it for next time! 😉 🤪 » [Next page](https://community.gladysassistant.com/t/gladys-assistant-4-28-expiration-des-etats-de-capteurs-nouveaux-appareils-zigbee-et-plus/8352.md?page=2)