# Gladys Assistant 4.47: DuckDB 1.1, Zigbee2mqtt heating and more! **URL:** \ **Category:** Actualités\ **Created:** [October 25, 2024, 8:36am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136 "2024-10-25T08:36:55Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [October 25, 2024, 8:36am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/1 "2024-10-25T08:36:56Z")
Hello everyone! I returned safely from Japan at the start of the week, and I’m publishing today the developments from the last two weeks 😄 - **DuckDB 1.1.1** : DuckDB released updates to fix bugs identified since their 1.0 release. At Gladys, one of these bugs prevented some users from reimporting their Gladys Plus backups. Although I couldn’t reproduce this restore issue, I believe the 1.1.1 update should fix it. I saw on a DuckDB GitHub issue that other users were encountering the same problem. - **Zigbee2mqtt Heating** : Devices of the « pilot wire » type are now supported in the Gladys integration: ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/8/0/805d58c8e2ea23af4924accf362a2ee7fc33ea19.png) Thanks @cicoub13, @_Will_71 for the development and @Prof_Techno for the testing! - **Lixee TIC Zigbee2mqtt** : The « EASF03 » feature is now supported! Thanks @_Will_71 - **Camera** : Switched to a native ffmpeg approach instead of using the « ffmpeg-fluent » library which was completely outdated. This should fix memory leak issues. - **HomeKit** : Support for power strips. Thanks @bertrandda - **Scene** : Improved tablet responsiveness for the « scheduled trigger » The full CHANGELOG is available [here](https://github.com/GladysAssistant/Gladys/releases/tag/v4.47.0). **How to update?** If you installed Gladys with the official Raspberry Pi OS image, your instances will update **automatically** within the next few hours. It can take up to 24 hours, don’t panic. If you installed Gladys with Docker, make sure you are using Watchtower (see the [documentation](https://gladysassistant.com/fr/docs/installation/docker#mise-%C3%A0-jour-automatique-avec-watchtower)) **Getting started with Gladys?** Take advantage of the [official starter kit](https://gladysassistant.com/fr/starter-kit/)! - **€259.97** instead of €439.97 - A **futuristic** mini-PC (16 GB RAM, 512 GB NVMe SSD, low-power Intel N100 processor) - The official training to get started with a bundle of video tutorials and exclusive articles - 1 year of access to Gladys Plus ---
**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\ **Post date:** [October 25, 2024, 2:54pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/2 "2024-10-25T14:54:54Z")
Great job once again!! Thanks to all the devs and testers who worked on this new release 😉 ---
**Author:** ![dahut](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/d/e56c9b/32.png) [@dahut](https://community.gladysassistant.com/u/dahut)\ **Post date:** [October 26, 2024, 8:43am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/3 "2024-10-26T08:43:43Z")
Thank you all for your work. ---
**Author:** ![Lbocorp72](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/l/fbc32d/32.png) [@Lbocorp72](https://community.gladysassistant.com/u/Lbocorp72)\ **Post date:** [October 27, 2024, 10:50am UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/4 "2024-10-27T10:50:43Z")
Great work, thanks to everyone who contributed to these developments, I’ll test the heating function as soon as I return from my trip. 👍 ---
**Author:** ![gaetanb76](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaetanb76/32/5911_2.png) [@gaetanb76](https://community.gladysassistant.com/u/gaetanb76)\ **Post date:** [October 29, 2024, 2:09pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/5 "2024-10-29T14:09:10Z")
Another fantastic job, well done everyone! For heating control, I was thinking more of buttons to press to change the heating mode. It’s more responsive than selecting from the list. [[Avoir des appareils adaptés au Chauffage](https://community.gladysassistant.com/t/avoir-des-appareils-adaptes-au-chauffage/9088?u=gaetanb76)]([https://community.gladysassistant.com/t/avoir-des-appareils-adap](https://community.gladysassistant.com/t/avoir-des-appareils-adap) ---
**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\ **Post date:** [October 29, 2024, 3:00pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/6 "2024-10-29T15:00:24Z")
Hello. 6 buttons felt like too many on a single line (3 fit). If you want to make design suggestions, I’ll take a look 🙂 Regarding the « it jumps », is it only on this list? Which browser are you using? ---
**Author:** ![gaetanb76](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaetanb76/32/5911_2.png) [@gaetanb76](https://community.gladysassistant.com/u/gaetanb76)\ **Post date:** [October 29, 2024, 4:20pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/7 "2024-10-29T16:20:49Z")
Personally I don’t use the comfort -2°C (this corresponds to the underfloor heating comfort), nor the comfort -1°C. There were 4 buttons, as in the image I included in my message requesting devices suitable for heating. For the « it skips », that’s the only list I use. The Dashboard selection one doesn’t do it. Browser ---
**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\ **Post date:** [October 29, 2024, 4:34pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/8 "2024-10-29T16:34:29Z")
Hello, Ok for your case, I don’t use these commands either, but other people use the 6 commands so they all need to be included. ---
**Author:** ![gaetanb76](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaetanb76/32/5911_2.png) [@gaetanb76](https://community.gladysassistant.com/u/gaetanb76)\ **Post date:** [October 29, 2024, 5:11pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/9 "2024-10-29T17:11:15Z")
I agree with you, but it’s a shame that « he who can do more can’t do less »… If we could customize it according to our usage that would be great. Requesting a feature and not being able to use it is a bit frustrating. So I’ll continue to create scenes for my own use. ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [October 29, 2024, 5:13pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/10 "2024-10-29T17:13:56Z")
I find the dropdown menu solution very suitable, especially since, let’s be honest, this heating mode isn’t something you change every 5 minutes 😅 > [@gaetanb76](#): > > Asking for a feature and not being able to use it is a bit frustrating. You can’t use it? ---
**Author:** ![gaetanb76](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaetanb76/32/5911_2.png) [@gaetanb76](https://community.gladysassistant.com/u/gaetanb76)\ **Post date:** [October 29, 2024, 5:23pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/11 "2024-10-29T17:23:27Z")
Since I don’t have a Zigbee device, I don’t know how to use one. I’m creating a scene with Device state change « Kitchen Heating Mode » equals « I don’t know which value to put » Comfort? Eco? The device I created varies between 0 and 1. Maybe I should have set -2 and… I don’t really know. ---
**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\ **Post date:** [October 29, 2024, 5:24pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/12 "2024-10-29T17:24:25Z")
@_Will_71 is working on it here [Ajout du composant chauffage 6 ordres dans les scènes](https://community.gladysassistant.com/t/ajout-du-composant-chauffage-6-ordres-dans-les-scenes/9142) ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/a/f/afc1e4547eea14500c18bcb3172557f957b60ae2.png) ---
**Author:** ![gaetanb76](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaetanb76/32/5911_2.png) [@gaetanb76](https://community.gladysassistant.com/u/gaetanb76)\ **Post date:** [October 29, 2024, 5:28pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/13 "2024-10-29T17:28:12Z")
Yes, thanks @cicoub13 By the way, does my created MQTT device need to range from 0 to 5? Or do we not care. 0 and 1, as I set them, ---
**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\ **Post date:** [October 29, 2024, 5:29pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/14 "2024-10-29T17:29:52Z")
> [@gaetanb76](#): > > However, does my created MQTT device need to vary between 0 and 5? Gladys will read and send values between 0 and 5 for the 6 supported modes. If you want to use all the modes one day, you have to do the same with MQTT ---
**Author:** ![gaetanb76](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaetanb76/32/5911_2.png) [@gaetanb76](https://community.gladysassistant.com/u/gaetanb76)\ **Post date:** [October 29, 2024, 5:42pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/15 "2024-10-29T17:42:29Z")
In fact, I think that, since my Z-Wave devices are not recognized as heating devices, I don’t have access to the different modes like in the photo: ![f10c9fb1777e77e9f96c0e8c06d26421fcf87d46_2_690x318](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/4/b/4b7f055fc9ee1ee09f4e2393d06501d302d8c80f.jpeg) My Qubino Flush Pilot ZMNHJD have the following native features reported to Gladys: - Dimmer - Switch (currentvalue) - Switch (restoreprevious) - Temperature (if you add a sensor) ---
**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\ **Post date:** [October 29, 2024, 5:45pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/16 "2024-10-29T17:45:33Z")
Development is ongoing and does not include Z-Wave. I also have a Qubino on Z-Wave and the commands are handled differently. Qubino returns a value between 0 and 99. And they are already handled by Gladys but with a slider. ---
**Author:** ![gaetanb76](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaetanb76/32/5911_2.png) [@gaetanb76](https://community.gladysassistant.com/u/gaetanb76)\ **Post date:** [October 29, 2024, 5:48pm UTC](https://community.gladysassistant.com/t/gladys-assistant-4-47-duckdb-1-1-chauffage-zigbee2mqtt-et-plus/9136/17 "2024-10-29T17:48:42Z")
Yes, I use them with my multiple scenes. Oh well, I’ll skip this feature. I will now try to manage the vacation modes « present », « absent », « summer », « winter » for my schedules.