# Integration - Aterno Heating

**URL:** <https://community.gladysassistant.com/t/integration-chauffage-aterno/11545>\
**Category:** Développement\
**Tags:** integration-externe\
**Created:** [November 10, 2026, 9:23am UTC](https://community.gladysassistant.com/t/integration-chauffage-aterno/11545 "2026-11-10T09:23:14Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![JKBS64](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/jkbs64/32/22723_2.png) [@JKBS64](https://community.gladysassistant.com/u/JKBS64)\
**Post date:** [November 10, 2026, 9:23am UTC](https://community.gladysassistant.com/t/integration-chauffage-aterno/11545/1 "2026-11-10T09:23:14Z")

</div>

Hello,

I have top-notch radiators (I think), brand ATERNO ([Radiateurs basse consommation - Aterno](https://www.aterno.fr/radiateur-basse-consommation.html)), but their app, which uses a proprietary box to connect remotely and manage the radiators, is outdated and, moreover, I often lose the connection.

I think this is a very proprietary solution, but if someone had a solution to have my radiators managed by Gladys, that would be very good news.

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![GBoulvin](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gboulvin/32/10006_2.png) [@GBoulvin](https://community.gladysassistant.com/u/GBoulvin)\
**Post date:** [November 10, 2026, 3:22pm UTC](https://community.gladysassistant.com/t/integration-chauffage-aterno/11545/2 "2026-11-10T15:22:38Z")

</div>

Hi,

I just started Claude on the topic. Results in a few minutes…

Spoiler Alert: It’s not looking good…

---

<div class="post-metadata">

**Author:** ![GBoulvin](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gboulvin/32/10006_2.png) [@GBoulvin](https://community.gladysassistant.com/u/GBoulvin)\
**Post date:** [November 10, 2026, 4:01pm UTC](https://community.gladysassistant.com/t/integration-chauffage-aterno/11545/3 "2026-11-10T16:01:42Z")

</div>

Hello everyone,

I just published an external integration for **\*\*Aterno\*\*** heaters, via the **\*\*Eco Aterno\*\*** box (the one from the mobile app).

**\*\*What it does\*\***

- One Gladys device per heater: requested temperature, ambient temperature, on/off, frost protection, boost (bathroom models), open window detection, and presence detection.

- **\*\*Local and cloud\*\*** : local if you provide the box’s IP address, otherwise via the cloud, with automatic switching and a « degraded » badge if the preferred channel does not respond.

- Real-time updates: a change made from the Eco Aterno app or a thermostat is reflected in Gladys in a few seconds.

- **\*\*Scenes\*\*** : 3 triggers (heater mode changed, fault, box connection changed) and 4 actions (set temperature, change mode, boost, refresh), for one heater or for all.

- **\*\*Dashboard\*\*** : 2 widgets, « Aterno Heating » (overview) and « Aterno Heater » (one heater with quick actions).

- Available in French, English, German, and Spanish.

**\*\*What you need\*\***

- Gladys 5.1.0 or newer.

- An Eco Aterno box with your heaters already associated in the app.

- The MAC address of the box (on the back) and the password chosen in the app.

**\*\*To know before installing\*\***

This is a **\*\*0.1.0\*\*** version: the Eco Aterno box is actually a Delta Dore Tydom gateway, and the integration relies on this protocol. It has been tested end-to-end against a simulated box, but **\*\*not yet on real hardware\*\***. I am therefore looking for testers: whether it works or not, your feedback (with logs in `LOG_LEVEL=debug`, they never contain the password) is of great interest to me.

Unofficial integration, with no link to Aterno.

Repository and documentation: [GitHub - gboulvin/Gladys-Aterno · GitHub](https://github.com/gboulvin/Gladys-Aterno)

Thanks in advance for your tests!

Edit: Available on the store within the hour!

---

<div class="post-metadata">

**Author:** ![JKBS64](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/jkbs64/32/22723_2.png) [@JKBS64](https://community.gladysassistant.com/u/JKBS64)\
**Post date:** [November 10, 2026, 4:23pm UTC](https://community.gladysassistant.com/t/integration-chauffage-aterno/11545/4 "2026-11-10T16:23:12Z")

</div>

Super Gwen @GBoulvin, I won’t be able to test right away, my Aterno box is no longer reachable and I’m abroad. I’m back in France 🇫🇷 at the end of the week. For now, I’ll take a look. Congratulations on your speed!

---

<div class="post-metadata">

**Author:** ![JKBS64](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/jkbs64/32/22723_2.png) [@JKBS64](https://community.gladysassistant.com/u/JKBS64)\
**Post date:** [November 11, 2026, 2:35am UTC](https://community.gladysassistant.com/t/integration-chauffage-aterno/11545/5 "2026-11-11T02:35:11Z")

</div>

Hello, I managed to reconnect to the box and was able to install the integration and associated widgets, it works perfectly. Thank you so much

```auto
[2026-11-11T02:26:48.372Z] [INFO] Starting the Aterno integration...
[2026-11-11T02:26:48.495Z] [INFO] [gladys-sdk] connected to Gladys (http://172.30.0.1:80)
[2026-11-11T02:28:38.329Z] [INFO] onConfigUpdated -> new configuration received
[2026-11-11T02:28:39.426Z] [INFO] [box] 2 radiator(s) found on the box
[2026-11-11T02:28:39.430Z] [INFO] Box connection: cloud
[2026-11-11T02:30:57.524Z] [INFO] Widget action aterno_overview.all_frost

```

---

<div class="post-metadata">

**Author:** ![GBoulvin](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gboulvin/32/10006_2.png) [@GBoulvin](https://community.gladysassistant.com/u/GBoulvin)\
**Post date:** [November 11, 2026, 9:43am UTC](https://community.gladysassistant.com/t/integration-chauffage-aterno/11545/6 "2026-11-11T09:43:58Z")

</div>

I just released the second version that automates local access to your box by directly searching for the box on the local network.

Can you update the integration and let me know if it works (with a log)?

---

<div class="post-metadata">

**Author:** ![JKBS64](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/jkbs64/32/22723_2.png) [@JKBS64](https://community.gladysassistant.com/u/JKBS64)\
**Post date:** [November 15, 2026, 10:24am UTC](https://community.gladysassistant.com/t/integration-chauffage-aterno/11545/7 "2026-11-15T10:24:26Z")

</div>

Hi, I’ve updated the integration but I don’t see what it changed. My box is found whether I put the IP address or not. What exactly do you want me to do? In any case, do I need to enter the MAC address, right?

---

<div class="post-metadata">

**Author:** ![GBoulvin](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gboulvin/32/10006_2.png) [@GBoulvin](https://community.gladysassistant.com/u/GBoulvin)\
**Post date:** [November 15, 2026, 11:30am UTC](https://community.gladysassistant.com/t/integration-chauffage-aterno/11545/8 "2026-11-15T11:30:03Z")

</div>

What caught my attention was this line: “Box connection: cloud”

So I modified the integration to make the local mode easier/intuitive to configure…

---

<div class="post-metadata">

**Author:** ![JKBS64](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/jkbs64/32/22723_2.png) [@JKBS64](https://community.gladysassistant.com/u/JKBS64)\
**Post date:** [November 15, 2026, 12:40pm UTC](https://community.gladysassistant.com/t/integration-chauffage-aterno/11545/9 "2026-11-15T12:40:39Z")

</div>

In that case, I didn’t question it.

I was hoping to have graphs showing the radiator’s operation, a curve over a given time when it’s running and another when it continues to heat thanks to the reverse cycle, but no miracle, the Aterno app doesn’t offer that.

Anyway, it’s functional. In parallel, I used the Gladys thermostat, which is great. It offers more features than the Aterno app.
