# External integration - Dyson

**URL:** <https://community.gladysassistant.com/t/integration-externe-dyson/11616>\
**Category:** Configuration\
**Tags:** integration-externe\
**Created:** [November 17, 2026, 7:02pm UTC](https://community.gladysassistant.com/t/integration-externe-dyson/11616 "2026-11-17T19:02:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![JKBS64](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/jkbs64/32/22723_2.png) [@JKBS64](https://community.gladysassistant.com/u/JKBS64)\
**Post date:** [November 17, 2026, 7:02pm UTC](https://community.gladysassistant.com/t/integration-externe-dyson/11616/1 "2026-11-17T19:02:01Z")

</div>

Good evening everyone and especially @prohand

I’m having a small issue with the Dyson integration, the connection isn’t going as expected. I’m sure of my credentials, I just renewed my password. The device’s IP address (a dehumidifier) is correct. I get stuck when I validate the code (I receive it perfectly), the message is: “Dyson refused the code or password. Check them, or request a new code.”

The logs don’t provide much information

# **Logs**

```auto
[2026-11-17T18:49:50.131Z] [INFO] Starting the Dyson integration...
[2026-11-17T18:49:50.261Z] [INFO] [gladys-sdk] connected to Gladys (http://172.30.0.1:80)
[2026-11-17T18:50:05.386Z] [INFO] onConfigUpdated -> new configuration received
[2026-11-17T18:50:08.918Z] [INFO] onConfigUpdated -> new configuration received
[2026-11-17T18:51:52.017Z] [INFO] onConfigUpdated -> new configuration received

```

If you have any ideas?

I definitely don’t have good karma with my dehumidifiers, I’m currently bothering @guim31 with the MIDEA integration
