# Overkitz external integration: Atlantic balloon not rising

**URL:** <https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442>\
**Category:** Configuration\
**Tags:** integration-externe\
**Created:** [August 3, 2026, 7:29pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442 "2026-08-03T19:29:51Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![spenceur](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/spenceur/32/1961_2.png) [@spenceur](https://community.gladysassistant.com/u/spenceur)\
**Post date:** [August 3, 2026, 7:29pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/1 "2026-08-03T19:29:51Z")

</div>

I managed to connect to overkitz Atlantic  
I have a device that is found «&nbsp;MODBUSLINK&nbsp;»

But absolutely not my water heater.  
What do you need?

`[2026-08-03T19:21:54.251Z] [INFO] [overkiz] Connected to the Overkiz API`  
`[2026-08-03T19:21:54.312Z] [INFO] [overkiz] Fetched 4 Overkiz devices`  
`[2026-08-03T19:21:55.674Z] [INFO] [overkiz] Connected to the Overkiz API`  
`[2026-08-03T19:21:55.710Z] [INFO] [overkiz] Fetched 4 Overkiz devices`  
`[2026-08-03T19:22:18.372Z] [INFO] onScanRequest -> refreshing Overkiz devices`  
`[2026-08-03T19:27:47.425Z] [INFO] onScanRequest -> refreshing Overkiz devices`  
`[2026-08-03T19:27:48.542Z] [INFO] onScanRequest -> refreshing Overkiz devices`

my water heater:

> **[chauffe-eau Plat Atlantic Lineo 65 Litres 157207 steatite mural](https://www.mister-chauffe-eau.com/chauffe-eau-steatite/chauffe-eau-lineo-65-mono-Atlantic.html)**
>
> Chauffe-eau électrique 65L multi-positions Atlantic Lineo 157207 polyvalence et confort. Gagnez de l'espace tout en bénéficiant d'une eau chaude en abondance pour votre foyer.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/9/8/9842ead138802fefd7722fb9962eef63fcfd19c5.png)

---

<div class="post-metadata">

**Author:** ![mutmut](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/mutmut/32/14064_2.png) [@mutmut](https://community.gladysassistant.com/u/mutmut)\
**Post date:** [August 3, 2026, 7:48pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/2 "2026-08-03T19:48:23Z")

</div>

@spenceur not sure your ball is already available:

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/f/5/f533158ee6ebd2eb0c6d0a7677b1eb57713174d8.png)

---

<div class="post-metadata">

**Author:** ![spenceur](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/spenceur/32/1961_2.png) [@spenceur](https://community.gladysassistant.com/u/spenceur)\
**Post date:** [August 3, 2026, 7:54pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/3 "2026-08-03T19:54:09Z")

</div>

That’s why I created this post to be taken into account (what exactly is missing?) 🙂  
Thanks @mutmut

I made a little matter plugin to integrate it (well, I need to revise it)  
but I had this information and it was more than enough

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/4/2/426519314e1164828aa7a732f6aca59c6ab12c1d.png)

---

<div class="post-metadata">

**Author:** ![mutmut](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/mutmut/32/14064_2.png) [@mutmut](https://community.gladysassistant.com/u/mutmut)\
**Post date:** [August 3, 2026, 7:56pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/4 "2026-08-03T19:56:22Z")

</div>

> [@spenceur](#):
>
> That’s why I created this post to be taken into account (what exactly is missing?) 🙂

ok I didn’t understand, I took the liberty of changing the post title.

---

<div class="post-metadata">

**Author:** ![prohand](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/prohand/32/15713_2.png) [@prohand](https://community.gladysassistant.com/u/prohand)\
**Post date:** [August 3, 2026, 9:22pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/5 "2026-08-03T21:22:55Z")

</div>

I had the same thought as you at first and then I saw the message in the integration that said it wasn’t available yet.

For information, I spoke with @cicoub13 this morning in PM and he should normally work on the hot water balloons issue on Wednesday 😉

---

<div class="post-metadata">

**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\
**Post date:** [August 4, 2026, 5:58am UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/6 "2026-08-04T05:58:42Z")

</div>

Hi. I started looking into it but I think we’ll need to modify the core of Gladys to add a new type of device. We could do it now but it’s a bit of a hack and the feature labels aren’t clear.  
I’m currently writing a specification to add it to Gladys.  
Once that’s done, I can add it to the Overkiz integration.

Thanks for the reference @spenceur, I’ll probably ask you for testing as well 😉

---

<div class="post-metadata">

**Author:** ![spenceur](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/spenceur/32/1961_2.png) [@spenceur](https://community.gladysassistant.com/u/spenceur)\
**Post date:** [August 4, 2026, 7:21am UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/7 "2026-08-04T07:21:58Z")

</div>

no problem @cicoub13 🙂

---

<div class="post-metadata">

**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\
**Post date:** [August 4, 2026, 7:27am UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/8 "2026-08-04T07:27:08Z")

</div>

Could you look at the specification?

> <https://github.com/GladysAssistant/Gladys/pull/2771>
>
> Gladys has no category for domestic hot water. A connected water heater can only… be published today as a makeshift assembly — switch/binary for on/off, heater/pilot-wire-mode (a room-heating concept) bent into a mode selector — so the user does not recognize their appliance in the dashboard, and scenes have no mode selector. Integrations have no target either: server/services/matter/README.md lists WaterHeaterManagement and WaterHeaterMode as not handled, for want of something to map them onto.
> 
> This adds a living specification for a \`water-heater\` category, written before the code as AGENTS.md asks for anything touching the data model. No code is changed: the spec is the deliverable, and it is meant to be challenged before implementation starts.
> 
> The design follows docs/specs/device-feature-categories.md, and section D answers its review checklist point by point:
> 
> \- Six types, all intrinsic to producing and storing hot water: binary, mode, target-temperature, remaining-hot-water, heating, boost. The water temperature measured in the tank is published as temperature-sensor/decimal and the consumption as energy-sensor features on the same device — one physical quantity, one category.
> \- The mode enum carries the full generic set of eight operating modes; per-appliance subsets are declared through supported\_options, including for appliances whose native interface is independent switches rather than a selector.
> \- Every type is mapped to its Matter cluster, with one divergence declared and argued: the category keeps its own target-temperature rather than reusing thermostat/target-temperature.
> \- heat-source, COP and absence-duration are deliberately deferred to the non-goals, with the reason for each.
> 
> Two reference device profiles are specified — a heat-pump water heater with a mode selector, and an electric storage tank exposing switches — so that no later change can quietly make any type mandatory.
> 
> 
> Claude-Session: https://claude.ai/code/session\_01JLunXRNfohakXDyqzwHHrw
> 
> \### Description
> 
> 
> 
> \## Forum
> 
> 
> 
> \### Checklist
> 
> \- \[\] Tests pass: \`cd server && npm run coverage\` (Codecov requires 100% coverage on changed lines) and Cypress (\`npm run cypress:run\`) if the UI changed
> \- \[\] Linter and prettier pass on both front and server (\`npm run eslint\`, \`npm run prettier\`)
> \- \[\] No undocumented breaking change

---

<div class="post-metadata">

**Author:** ![prohand](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/prohand/32/15713_2.png) [@prohand](https://community.gladysassistant.com/u/prohand)\
**Post date:** [August 4, 2026, 9:47am UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/9 "2026-08-04T09:47:11Z")

</div>

I’ll let @pierre-gilles take a look at this one 🙂

---

<div class="post-metadata">

**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\
**Post date:** [August 5, 2026, 9:38pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/10 "2026-08-05T21:38:04Z")

</div>

The specification has been validated and I implemented it this evening (in the water heater category in Gladys). As soon as it’s reviewed and accepted, I’ll start adding it to Overkiz.

---

<div class="post-metadata">

**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\
**Post date:** [August 7, 2026, 12:00pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/11 "2026-08-07T12:00:07Z")

</div>

The **water heater** category is now available in Gladys 🎉 ( **waiting for the next official version** to be deployed for everyone).

The integration on the Gladys Overkiz side is done, based on this new category.

The image is here (to be used in development mode in the Overkiz external integration) **ONCE GLADYS** is updated on your end:

`ghcr.io/cicoub13/gladys-overkiz:water-heater`

---

<div class="post-metadata">

**Author:** ![prohand](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/prohand/32/15713_2.png) [@prohand](https://community.gladysassistant.com/u/prohand)\
**Post date:** [August 7, 2026, 12:22pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/12 "2026-08-07T12:22:34Z")

</div>

Perfect, thanks 😉  
I’ll test it once the Gladys update has been pushed 🙂

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [August 7, 2026, 12:55pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/13 "2026-08-07T12:55:37Z")

</div>

> [@cicoub13](#):
>
> The image is here (to be used in development mode in the external Overkiz integration) **ONCE GLADYS** is updated on your end:

For info, you need to modify the `gladys_version` in the `gladys-assistant-integration.json` file to set it to \>= 4.85.0 (the next version, which I will release in a few minutes)

Example for the OpenWeather integration: [gladys-openweather/gladys-assistant-integration.json at main · GladysAssistant/gladys-openweather · GitHub](https://github.com/GladysAssistant/gladys-openweather/blob/main/gladys-assistant-integration.json#L11)

It’s super important to properly define this parameter; it allows you to exclude incompatible instances 😉

---

<div class="post-metadata">

**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\
**Post date:** [August 7, 2026, 12:57pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/14 "2026-08-07T12:57:19Z")

</div>

Claude had planned this 🤯

> <https://github.com/cicoub13/gladys-overkiz/blob/claude/chauffe-eaux-integration-feasibility-5q2pno/gladys-assistant-integration.json>

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [August 7, 2026, 12:59pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/15 "2026-08-07T12:59:12Z")

</div>

Too strong! Perfect 😉

---

<div class="post-metadata">

**Author:** ![prohand](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/prohand/32/15713_2.png) [@prohand](https://community.gladysassistant.com/u/prohand)\
**Post date:** [August 7, 2026, 2:28pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/16 "2026-08-07T14:28:16Z")

</div>

@cicoub13 I was able to test and everything looks good:

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/1/6/16e24ed7e3df5d53258cdf4ebeb0d95b260b9d1d.png)

However, on the first connection, the information is not updated and not even after waiting the 30 seconds as configured in the integration:

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/f/d/fdca24fc4a1417998e2a749a12d4d2146b86a16d.png)

In the logs, I have this:

```auto
[2026-08-07T14:23:53.604Z] [INFO] Starting the Overkiz integration...
[2026-08-07T14:23:53.647Z] [INFO] [gladys-sdk] connected to Gladys (http://172.30.0.1:80)
[2026-08-07T14:23:53.652Z] [INFO] Overkiz configuration is incomplete, waiting for the user to fill it in
[2026-08-07T14:24:22.016Z] [INFO] onConfigUpdated -> reconnecting with the new configuration
[2026-08-07T14:24:22.627Z] [INFO] [overkiz] Connected to the Overkiz API
[2026-08-07T14:24:22.663Z] [INFO] [overkiz] Fetched 4 Overkiz devices
[2026-08-07T14:24:25.232Z] [INFO] [overkiz] Connected to the Overkiz API
[2026-08-07T14:24:25.267Z] [INFO] [overkiz] Fetched 4 Overkiz devices
[2026-08-07T14:24:26.419Z] [INFO] Device dump: {"deviceURL":"internal://1537-7989-4054/uPod/0","label":"INTERNAL (uPod/0)","controllableName":"internal:UPodComponent","uiClass":"Pod","widgetName":"Pod","commands":[],"states":[]}
[2026-08-07T14:24:26.419Z] [INFO] Device dump: {"deviceURL":"internal://1537-7989-4054/uPodNetwork/0","label":"INTERNAL (uPodNetwork/0)","controllableName":"internal:UPodNetWorkComponent","uiClass":"Pod","widgetName":"Pod","commands":[],"states":[{"name":"core:RSSILevelState","value":-68},{"name":"core:RSSIQualityState","value":"low"}]}
[2026-08-07T14:24:26.419Z] [INFO] Device dump: {"deviceURL":"modbuslink://1537-7989-4054/1#1","label":"LINEO","controllableName":"modbuslink:AtlanticDomesticHotWaterProductionMBLComponent","uiClass":"WaterHeatingSystem","widgetName":"DomesticHotWaterProduction","commands":["refreshAbsenceEndDate","refreshAbsenceMode","refreshAbsenceStartDate","refreshBoostEndDate","refreshBoostMode","refreshBoostStartDate","refreshBottomTankWaterTemperature","refreshControlWaterTargetTemperature","refreshDateTime","refreshMiddleWaterTemperatureIn","refreshRemainingHotWater","refreshWaterTargetTemperature","setAbsenceEndDate","setAbsenceMode","setAbsenceStartDate","setBoostEndDate","setBoostMode","setBoostStartDate","setDateTime","setExpectedNumberOfShower","setTargetDHWTemperature","setWaterTargetTemperature","refreshExpectedNumberOfShower","refreshAntiLegionellosis","refreshBoostElectricPowerConsumption","refreshDHWError","refreshDHWMode","refreshDiagnostic","refreshElectricBoosterOperatingTime","refreshHeatPumpOperatingTime","refreshHeatingStatus","refreshIHMType","refreshManufacturer","refreshMiddleWaterTemperature","refreshNumberControlShowerRequest","refreshNumberOfShowerRemaining","refreshOperatingRange","refreshPowerHeatElectrical","refreshPowerHeatElectricalIn","refreshPowerHeatPump","refreshProgrammingAvailable","refreshProgrammingSlots","refreshSmartGridOption","refreshStaticStates1","refreshStaticStates2","refreshV40WaterVolumeEstimation","setAntiLegionellosis","setDHWMode","setOperatingRange","setProgrammingSlots","setSmartGridOption"],"states":[{"name":"core:WaterTargetTemperatureState","value":55},{"name":"core:TargetDHWTemperatureState","value":55},{"name":"core:ExpectedNumberOfShowerState","value":0},{"name":"core:ControlWaterTargetTemperatureState","value":46},{"name":"modbuslink:NumberControlShowerRequestState","value":1},{"name":"core:StopRelaunchState","value":"Relaunch Disable"},{"name":"core:ProgrammingAvailableState","value":0},{"name":"modbuslink:DHWBoostModeState","value":"off"},{"name":"modbuslink:DHWAbsenceModeState","value":"off"},{"name":"modbuslink:OperatingRangeState","value":"pac24h_elec24h"},{"name":"modbuslink:AntiLegionellosisState","value":1},{"name":"modbuslink:SmartGridOptionState","value":"deactive"},{"name":"core:NameState","value":"LINEO"},{"name":"core:ManufacturerNameState","value":"Atlantic"},{"name":"modbuslink:DHWCapacityState","value":80},{"name":"core:NumberOfTankState","value":2},{"name":"core:MinimalTemperatureManualModeState","value":50},{"name":"core:MaximalTemperatureManualModeState","value":70},{"name":"core:MinimalShowerManualModeState","value":1},{"name":"core:MaximalShowerManualModeState","value":5},{"name":"modbuslink:HeatPumpOperatingTimeState","value":0},{"name":"modbuslink:ElectricBoosterOperatingTimeState","value":2604},{"name":"modbuslink:ProgrammingSlotsState","value":{"slot2":{"start":"00:30","end":"01:30"},"slot1":{"start":"08:00","end":"20:00"}}},{"name":"modbuslink:DHWErrorState","value":{"code":255,"minor":255,"family":"W","type":4}},{"name":"modbuslink:IHMTypeState","value":"WaterdropCE"},{"name":"modbuslink:ManufacturerState","value":"Atlantic"},{"name":"core:AbsenceEndDateState","value":{"month":5,"hour":10,"year":2026,"weekday":6,"day":3,"minute":37,"second":10}},{"name":"core:AbsenceStartDateState","value":{"month":5,"hour":10,"year":2026,"weekday":4,"day":1,"minute":27,"second":19}},{"name":"core:BoostEndDateState","value":{"month":"??","hour":0,"year":2026,"weekday":"??","day":17,"minute":37,"second":0}},{"name":"core:BoostStartDateState","value":{"month":"??","hour":23,"year":2026,"weekday":"??","day":16,"minute":37,"second":0}},{"name":"modbuslink:DHWModeState","value":"autoMode"},{"name":"core:RemainingHotWaterState","value":42},{"name":"core:NumberOfShowerRemainingState","value":1},{"name":"core:V40WaterVolumeEstimationState","value":10317},{"name":"core:HeatingStatusState","value":"off"},{"name":"modbuslink:PowerHeatElectricalState","value":0},{"name":"core:BoostElectricPowerConsumptionState","value":0},{"name":"core:PowerHeatElectricalInState","value":0},{"name":"modbuslink:PowerHeatPumpState","value":0},{"name":"core:BottomTankWaterTemperatureState","value":0},{"name":"modbuslink:MiddleWaterTemperatureState","value":41.6},{"name":"core:MiddleWaterTemperatureInState","value":36.8}]}
[2026-08-07T14:24:26.419Z] [INFO] Device dump: {"deviceURL":"modbuslink://1537-7989-4054/1#2","label":"MODBUSLINK (1#2)","controllableName":"modbuslink:DHWCumulatedElectricalEnergyConsumptionMBLSystemDeviceSensor","uiClass":"ElectricitySensor","widgetName":"CumulativeElectricPowerConsumptionSensor","commands":["refreshElectricEnergyConsumption"],"states":[{"name":"core:ElectricEnergyConsumptionState","value":2572438},{"name":"core:ConsumptionTariff0State","value":939317},{"name":"core:ConsumptionTariff1State","value":88144},{"name":"core:ConsumptionTariff2State","value":1022247}]}
[2026-08-07T14:24:26.419Z] [INFO] Dumped 4 Overkiz device(s)

```

---

<div class="post-metadata">

**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\
**Post date:** [August 7, 2026, 2:52pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/17 "2026-08-07T14:52:26Z")

</div>

Are you okay in Gladys 4.85? I’m checking the logs at the same time

---

<div class="post-metadata">

**Author:** ![prohand](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/prohand/32/15713_2.png) [@prohand](https://community.gladysassistant.com/u/prohand)\
**Post date:** [August 7, 2026, 2:55pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/18 "2026-08-07T14:55:02Z")

</div>

Yes, I am on 4.85.

---

<div class="post-metadata">

**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\
**Post date:** [August 7, 2026, 3:08pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/19 "2026-08-07T15:08:05Z")

</div>

Can you try again? I don’t know if Gladys will try to pull a new version of the image

Otherwise [Package gladys-overkiz · GitHub](http://ghcr.io/cicoub13/gladys-overkiz:water-heater)  
sha256:8f53907eaad61fb4e300c264ff8b91f82a4d30aafc774b4153e3d833c5df0fad

And you need to delete the device and recreate it

---

<div class="post-metadata">

**Author:** ![spenceur](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/spenceur/32/1961_2.png) [@spenceur](https://community.gladysassistant.com/u/spenceur)\
**Post date:** [August 7, 2026, 4:19pm UTC](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442/20 "2026-08-07T16:19:15Z")

</div>

I can’t see my device on my end 🤔

`[2026-08-07T16:16:42.075Z] [INFO] Starting the Overkiz integration... [2026-08-07T16:16:42.278Z] [INFO] [gladys-sdk] connected to Gladys (``http://172.30.0.1:8455``) [2026-08-07T16:16:42.957Z] [INFO] [overkiz] Connected to the Overkiz API [2026-08-07T16:16:43.000Z] [INFO] [overkiz] Fetched 4 Overkiz devices [2026-08-07T16:16:48.301Z] [INFO] onScanRequest -> refreshing Overkiz devices`

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/e/d/ed148b3330452fc53389c500dbc397e9083568cf.png)

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/8/c/8c3d1457a951dcd68fd269398ba8312c37279938.png)

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/3/a/3a87df99c9acd770e8a635c9b5423e19d888e4c0.png)

[Next page](https://community.gladysassistant.com/t/integration-externe-overkiz-ajout-ballon-atlantic/10442.md?page=2)
