# More ZIGBEE thermometers **URL:** \ **Category:** Configuration\ **Tags:** zigbee2mqtt\ **Created:** [June 18, 2026, 6:22pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285 "2026-06-18T18:22:56Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [June 18, 2026, 6:22pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/1 "2026-06-18T18:22:56Z")
Hello, I have two ZIGBEE thermometers that suddenly stopped sending information to GLADYS. I removed them from the zigbee2MQTT configuration but I can’t reinstall them… ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/1/5/157ca3634d3da6aed32e897aa062cdbf7079ff5a.png) Also, my service seems OK ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/c/f/cf015a6ef23be9ef899cb72f633b442d0cfb5548.png) I reset the integration but without success. However, since then I have this message: ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/d/3/d3fb5194aab7fcc17353066aa7002ff27cc0c605.png) Thanks in advance ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [June 18, 2026, 6:35pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/2 "2026-06-18T18:35:03Z")
Hi @thekassmachine 🙂 Can you give us the exact reference of your Zigbee sensors? Each device has its own pairing procedure, so the easiest way is to check your model in the official Zigbee2MQTT list: > **[Zigbee2MQTT](https://www.zigbee2mqtt.io/supported-devices/)** > > Zigbee to MQTT bridge, get rid of your proprietary Zigbee bridges Then follow the procedure dedicated to your device. ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [June 18, 2026, 6:40pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/3 "2026-06-18T18:40:14Z")
Using a backup, I was able to restore a state where my sensors are paired, but no data is coming through.. ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/3/1/31ed408dc8810e90585c5dc9dea20094d44c0b3f.png) However, the sensors are properly detected ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/2/c/2c55faa0f8bcbcef0b171adaea53e46c51259bf9.png) ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/a/d/adda6306c7d29e68e3760e417b2bb7f221ff40ea.png) But in Gladys, no information is coming through.. strange? ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [June 18, 2026, 6:57pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/4 "2026-06-18T18:57:05Z")
Can you try with the « Device » widget? ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [June 18, 2026, 7:25pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/5 "2026-06-18T19:25:01Z")
![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/7/5/753dd475945f6bdf9f5ade75290190a64b4478c8.png) Still the same, no recent value ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [June 19, 2026, 7:56am UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/6 "2026-06-19T07:56:13Z")
And regarding the Zigbee2mqtt integration in Gladys, did you add the devices to Gladys? Don’t you have anything in the « Zigbee Discovery » tab? ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [June 19, 2026, 1:19pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/7 "2026-06-19T13:19:46Z")
no, in discovery I don’t see anything… 😕 ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [June 19, 2026, 3:17pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/8 "2026-06-19T15:17:20Z")
Are you sure everything is working correctly on the Zigbee2MQTT side? If you open the Zigbee2MQTT interface, are your devices properly connected and regularly sending their values? Before checking what’s happening in Gladys, the first step is to make sure everything is working correctly on the Zigbee2MQTT side 🙂. ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [June 20, 2026, 6:12am UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/9 "2026-06-20T06:12:32Z")
This morning they appear again in Gladys, but still no recent value… In the Zigbee2MQTT configuration they are like this: ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/7/f/7fd48b6079042fee5d99a01e22ee1880de31af81.png) and I don’t know how to change anything about their state; I tried querying and reconfiguring but without result ---
**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\ **Post date:** [June 20, 2026, 8:54am UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/10 "2026-06-20T08:54:35Z")
Silly question: have you checked the batteries? At my place, the battery level of my devices under z2m is particularly unreliable! ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [June 21, 2026, 11:00am UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/11 "2026-06-21T11:00:09Z")
It’s not stupid.. I changed one of the two thermometers ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [June 25, 2026, 3:20pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/12 "2026-06-25T15:20:34Z")
Well after other tests I can’t find… the thermometers are well recognized in ZIGBEE2MQTT & in GLADYS, but no information is coming up… either my Gladys is crashed, or the thermometers are dead? ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [June 25, 2026, 6:42pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/13 "2026-06-25T18:42:51Z")
Are the data not being sent to Gladys, or are they not being sent to Zigbee2MQTT in the first place? To check, log in to Zigbee2MQTT, click on your sensor in the device list, then open the **“Exposures”** tab: ![Screenshot 2026-06-25 at 20.40.37](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/9/8/98b1ea7c192fbea5454eb559fa8bd680b0d7c967.jpeg) Note the displayed value (or take a screenshot), then come back to check about an hour later. Unless the temperature is extremely stable in your home, you should notice a change. - If the value has not changed, the problem is probably between **the sensor and Zigbee2MQTT**. - If the value has changed in Zigbee2MQTT but not in Gladys, then the problem is probably between **Zigbee2MQTT and Gladys**. 🙂 This will already allow us to precisely identify where the communication chain is breaking. ---
**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\ **Post date:** [June 26, 2026, 5:58pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/14 "2026-06-26T17:58:17Z")
If you don’t want to wait an hour, you can put your sensor in your hand, it will heat up faster 👌 ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [June 29, 2026, 12:39pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/15 "2026-06-29T12:39:35Z")
Okay, I’ll give it a try and let you know ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [June 29, 2026, 8:06pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/16 "2026-06-29T20:06:08Z")
Well, nothing changes on the « exhibition » page of my sensors… ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [June 29, 2026, 8:26pm UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/17 "2026-06-29T20:26:50Z")
![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/9/7/97e53202044223998cb0b365724df5984718ddc9.png) I’m seeing this now.. But the sensor data is coming back!! I don’t understand anything anymore ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [June 30, 2026, 6:53am UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/18 "2026-06-30T06:53:53Z")
> [@thekassmachine](#): > > I’m seeing this now… But the sensor data is coming through!! The error message might be a relic. If Zigbee2mqtt is available and everything is working, you can ignore it 🙂 ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [June 30, 2026, 8:16am UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/19 "2026-06-30T08:16:07Z")
Ok, but the data « read » by Gladys is not the same as the thermometer indicates… 😕 ---
**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\ **Post date:** [June 30, 2026, 8:18am UTC](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285/20 "2026-06-30T08:18:51Z")
> [@thekassmachine](#): > > Well, nothing changes on the « exposure » page of my sensors… > [@thekassmachine](#): > > . But the sensor data is coming back!! If nothing moves on the exposure page, the values cannot come back up in Gladys! Do you have screenshots of the exposure page and your sensor in Gladys at the same time? [Next page](https://community.gladysassistant.com/t/plus-de-temperatures-thermometres-zigbee/10285.md?page=2)