# Using Aeotec ZW095 Home Energy

**URL:** <https://community.gladysassistant.com/t/pouvoir-utiliser-home-energy-aeotec-zw095/9476>\
**Category:** Demande de fonctionnalités\
**Created:** [April 15, 2025, 9:19am UTC](https://community.gladysassistant.com/t/pouvoir-utiliser-home-energy-aeotec-zw095/9476 "2025-04-15T09:19:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![gwenvel](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/g/b487fb/32.png) [@gwenvel](https://community.gladysassistant.com/u/gwenvel)\
**Post date:** [April 15, 2025, 9:19am UTC](https://community.gladysassistant.com/t/pouvoir-utiliser-home-energy-aeotec-zw095/9476/1 "2025-04-15T09:19:14Z")

</div>

Hello,

I would like to use the Aeotec Home Energy ZW095, which uses the Z-Wave protocol.  
When I try to integrate it into my devices in Gladys, it says:  
«&nbsp;This device is not yet supported by Gladys, feel free to submit it to us so it can be added!&nbsp;»  
How are new devices added to Gladys?

Kind regards

---

<div class="post-metadata">

**Author:** ![mutmut](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/mutmut/32/14064_2.png) [@mutmut](https://community.gladysassistant.com/u/mutmut)\
**Post date:** [April 15, 2025, 12:21pm UTC](https://community.gladysassistant.com/t/pouvoir-utiliser-home-energy-aeotec-zw095/9476/2 "2025-04-15T12:21:48Z")

</div>

Hi @gwenvel  
You’ll need to provide some info to @Sescandell so he can implement the module. Personally I have an AEON HEM DSB09 (I think an earlier version than yours) and a few features are also missing (but I’ll wait for your update to compare).

So here’s the link to the module [AEON Labs / Home Energy Meter - Gen5 ZW095](https://devices.zwave-js.io/?jumpTo=0x0086:0x0002:0x005f:0.0)

Then you can draw inspiration from my posts for the screenshots and info to provide: [[zwaveJS] : ajout fonctionnalités AEON Labs Smart Switch Gen5 ZW075](https://community.gladysassistant.com/t/zwavejs-ajout-fonctionnalites-aeon-labs-smart-switch-gen5-zw075/9453)

You can also add a «&nbsp;zwavejs&nbsp;» tag to make it easier to find in searches and change the category to «&nbsp;Configuration&nbsp;».

---

<div class="post-metadata">

**Author:** ![mutmut](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/mutmut/32/14064_2.png) [@mutmut](https://community.gladysassistant.com/u/mutmut)\
**Post date:** [May 12, 2025, 12:21pm UTC](https://community.gladysassistant.com/t/pouvoir-utiliser-home-energy-aeotec-zw095/9476/3 "2025-05-12T12:21:52Z")

</div>

Hi @gwenvel  
With the new release [4.58](https://community.gladysassistant.com/t/gladys-assistant-4-58-matter-mais-pas-que/9503/7) of Gladys, @Sescandell has integrated the power, energy, voltage, current… features for the modules that support it.  
On my DSB09, it works very well.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/1/2/129ab05baecfd143f10da73b2f77414f860f3886.png)  
By any chance, have you checked with your module whether new things appeared?