# \[Introduction\] dafox

**URL:** <https://community.gladysassistant.com/t/presentation-dafox/9030>\
**Category:** Présentations\
**Created:** [August 5, 2024, 4:23pm UTC](https://community.gladysassistant.com/t/presentation-dafox/9030 "2024-08-05T16:23:13Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![dafox](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/d/96bed5/32.png) [@dafox](https://community.gladysassistant.com/u/dafox)\
**Post date:** [August 5, 2024, 4:23pm UTC](https://community.gladysassistant.com/t/presentation-dafox/9030/1 "2024-08-05T16:23:13Z")

</div>

Hello everyone,

First and foremost passionate about Arduinos and 3D printing, I dipped a (small) toe into home automation to integrate all of that about 6 years ago.

I started with node-red and mosquitto on an Rpi-w, fairly quickly replaced by an Rpi2b, then an Rpi3b with Domoticz, which fully satisfied me for more than 3 years.

I then migrated to Jeedom on an Rpi4 (still using node-red and mosquitto), without major issues, much helped by the jmqtt plugin.

Because the latest Jeedom updates only brought me problems, I decided to try Gladys, which pleasantly surprised me with its ease of use and its fast, pleasant interface.

On the hardware side, I currently have a few ESPs running tasmotta and openmqtt, and about ten ESPs with their own firmware.  
I also use zigbee2mqtt to control a few bulbs.  
Interactions and automations are still handled by the fabulous node-red.

See you soon on the forum

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [August 5, 2024, 4:30pm UTC](https://community.gladysassistant.com/t/presentation-dafox/9030/2 "2024-08-05T16:30:14Z")

</div>

Hi @dafox and welcome to Gladys! 🙂

I hope you find what you’re looking for on Gladys; if not, please don’t hesitate to mention it on the forum — we’re always here to help 😉

---

<div class="post-metadata">

**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\
**Post date:** [August 5, 2024, 5:11pm UTC](https://community.gladysassistant.com/t/presentation-dafox/9030/3 "2024-08-05T17:11:02Z")

</div>

Welcome here! 🙂

---

<div class="post-metadata">

**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\
**Post date:** [August 5, 2024, 5:44pm UTC](https://community.gladysassistant.com/t/presentation-dafox/9030/4 "2024-08-05T17:44:37Z")

</div>

Welcome.