# \[Introduction\] - Lbocorp72

**URL:** <https://community.gladysassistant.com/t/presentation-lbocorp72/8972>\
**Category:** Présentations\
**Created:** [June 13, 2024, 6:32pm UTC](https://community.gladysassistant.com/t/presentation-lbocorp72/8972 "2024-06-13T18:32:10Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lbocorp72](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/l/fbc32d/32.png) [@Lbocorp72](https://community.gladysassistant.com/u/Lbocorp72)\
**Post date:** [June 13, 2024, 6:32pm UTC](https://community.gladysassistant.com/t/presentation-lbocorp72/8972/1 "2024-06-13T18:32:10Z")

</div>

Hello everyone,

My name is Ludo, 46 years old, electrician / automation engineer.  
I’ve been trying Gladys on a Raspberry Pi (RPI) since the beginning of the year.  
Being often on the road for work, I need to control several devices via scenes or remotely.

So far I’ve achieved with Gladys:

- control of lights
- user presence management
- opening sensors (intrusion detection)
- camera snapshot triggered by presence sensor.
- control of my water heater relay

I plan to manage my electric heating before next winter.

I am very satisfied with Gladys and its dashboard, it’s simple to set up and easy to use

See you soon

---

<div class="post-metadata">

**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\
**Post date:** [June 13, 2024, 6:49pm UTC](https://community.gladysassistant.com/t/presentation-lbocorp72/8972/2 "2024-06-13T18:49:45Z")

</div>

That’s a very nice message! 😁 Welcome here!

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [June 14, 2024, 7:32am UTC](https://community.gladysassistant.com/t/presentation-lbocorp72/8972/3 "2024-06-14T07:32:02Z")

</div>

Welcome to the forum, @Lbocorp72!

Don’t hesitate to ask if you have any questions 🙂

---

<div class="post-metadata">

**Author:** ![prohand](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/prohand/32/15713_2.png) [@prohand](https://community.gladysassistant.com/u/prohand)\
**Post date:** [June 15, 2024, 7:23pm UTC](https://community.gladysassistant.com/t/presentation-lbocorp72/8972/4 "2024-06-15T19:23:52Z")

</div>

Welcome to you 😉

For your water heater, which relay do you use?  
I’m interested in managing the link with EDF Tempo 🙂

---

<div class="post-metadata">

**Author:** ![Lbocorp72](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/l/fbc32d/32.png) [@Lbocorp72](https://community.gladysassistant.com/u/Lbocorp72)\
**Post date:** [June 21, 2024, 7:10pm UTC](https://community.gladysassistant.com/t/presentation-lbocorp72/8972/5 "2024-06-21T19:10:14Z")

</div>

Hello,

I plan to use modules that manage the pilot wire of my electric radiators based on temperature, my presence, EDF Tempo, etc. I ordered 2 different Zigbee modules to run tests.

- Legrand 064882 control via MQTT | Zigbee2MQTT  
([Legrand 064882 control via MQTT | Zigbee2MQTT](https://www.zigbee2mqtt.io/devices/064882.html))
- NodOn SIN-4-FP-21 control via MQTT Zigbee2MQTT ([NodOn SIN-4-FP-21 control via MQTT | Zigbee2MQTT](https://www.zigbee2mqtt.io/devices/SIN-4-FP-21.html)).