# Rflink, Node Red and Gladys **URL:** \ **Category:** Tutoriels\ **Tags:** node-red\ **Created:** [January 22, 2022, 10:51pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844 "2022-01-22T22:51:45Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![Psoy](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/psoy/32/9005_2.png) [@Psoy](https://community.gladysassistant.com/u/Psoy)\ **Post date:** [November 3, 2022, 4:41pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/41 "2022-11-03T16:41:21Z")
oops sorry, I hope it will work, because after repeatedly reinstalling I’ve gotten into the habit of backing up regularly, but I’ve never done it the way you’re going to. ---
**Author:** ![Psoy](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/psoy/32/9005_2.png) [@Psoy](https://community.gladysassistant.com/u/Psoy)\ **Post date:** [November 3, 2022, 4:54pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/42 "2022-11-03T16:54:04Z")
Did you run `` ---
**Author:** ![gaetanb76](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaetanb76/32/5911_2.png) [@gaetanb76](https://community.gladysassistant.com/u/gaetanb76)\ **Post date:** [November 3, 2022, 5:40pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/43 "2022-11-03T17:40:01Z")
yes, and not just once 😄 I just found a solution here : > > > \### Current Behavior > > \*\*Node-RED crashes during startup and/or deployment with… no details or log (log level trace)\*\* > \`\`\` > > 27 Feb 22:50:49 - \[info\] > > Welcome to Node-RED > =================== > > 27 Feb 22:50:49 - \[info\] Node-RED version: v2.2.2 > 27 Feb 22:50:49 - \[info\] Node.js version: v14.18.2 > 27 Feb 22:50:49 - \[info\] Linux 5.10.92-v8+ arm64 LE > 27 Feb 22:50:50 - \[info\] Loading palette nodes > 27 Feb 22:50:50 - \[debug\] Module: node-red-dashboard 3.1.6 /data/node\_modules/node-red-dashboard > 27 Feb 22:50:50 - \[debug\] Module: node-red-node-serialport 1.0.1 /data/node\_modules/node-red-node-serialport > 27 Feb 22:50:51 - \[info\] Dashboard version 3.1.6 started at /ui > 27 Feb 22:50:52 - \[info\] Settings file : /data/settings.js > 27 Feb 22:50:52 - \[info\] Context store : 'default' \[module=memory\] > 27 Feb 22:50:52 - \[info\] User directory : /data > 27 Feb 22:50:52 - \[warn\] Projects disabled : editorTheme.projects.enabled=false > 27 Feb 22:50:52 - \[info\] Flows file : /data/flows.json > 27 Feb 22:50:52 - \[info\] Server now running at http://127.0.0.1:1880/ > 27 Feb 22:50:52 - \[debug\] loaded flow revision: 333da4663a7709aaa4ac6deaf3733db4 > 27 Feb 22:50:52 - \[debug\] red/runtime/nodes/credentials.load : no user key present > 27 Feb 22:50:52 - \[debug\] red/runtime/nodes/credentials.load : using default key > 27 Feb 22:50:52 - \[debug\] red/runtime/nodes/credentials.load : keyType=system > 27 Feb 22:50:52 - \[warn\] > > \--------------------------------------------------------------------- > Your flow credentials file is encrypted using a system-generated key. > > If the system-generated key is lost for any reason, your credentials > file will not be recoverable, you will have to delete it and re-enter > your credentials. > > You should set your own key using the 'credentialSecret' option in > your settings file. Node-RED will then re-encrypt your credentials > file using your chosen key the next time you deploy a change. > \--------------------------------------------------------------------- > > 27 Feb 22:50:52 - \[trace\] runtime event: {"id":"runtime-state","retain":true} > 27 Feb 22:50:52 - \[trace\] runtime event: {"id":"runtime-deploy","payload":{"revision":"333da4663a7709aaa4ac6deaf3733db4"},"retain":true} > 27 Feb 22:50:52 - \[info\] Starting flows > 27 Feb 22:50:52 - \[debug\] red/nodes/flows.start : starting flow : global > 27 Feb 22:50:52 - \[debug\] red/nodes/flows.start : starting flow : f6f2187d.f17ca8 > 27 Feb 22:50:52 - \[trace\] \[flow:global\] start flow \[global\] > 27 Feb 22:50:52 - \[trace\] \[flow:global\] ------------------|--------------|----------------- > 27 Feb 22:50:52 - \[trace\] \[flow:global\] id | type | alias > 27 Feb 22:50:52 - \[trace\] \[flow:global\] ------------------|--------------|----------------- > 27 Feb 22:50:52 - \[trace\] \[flow:global\] c2b029082d2f328a | ui\_base | > 27 Feb 22:50:52 - \[trace\] \[flow:global\] daf5fb664ded84a4 | ui\_tab | > 27 Feb 22:50:52 - \[trace\] \[flow:global\] dca3bea54c493eb4 | ui\_group | > 27 Feb 22:50:52 - \[trace\] \[flow:global\] 5df552a8698cbe93 | ui\_group | > 27 Feb 22:50:52 - \[trace\] \[flow:global\] c2ab819cc6fb5f96 | ui\_group | > 27 Feb 22:50:52 - \[trace\] \[flow:global\] 28ef3f98b07f5827 | serial-port | > 27 Feb 22:50:52 - \[trace\] \[flow:global\] ------------------|--------------|----------------- > 27 Feb 22:50:52 - \[trace\] \[flow:f6f2187d.f17ca8\] start flow \[f6f2187d.f17ca8\] > 27 Feb 22:50:52 - \[debug\] \[inject:timestamp\] repeat = 900000 > 27 Feb 22:50:52 - \[trace\] \[flow:f6f2187d.f17ca8\] ------------------|--------------|----------------- > 27 Feb 22:50:52 - \[trace\] \[flow:f6f2187d.f17ca8\] id | type | alias > 27 Feb 22:50:52 - \[trace\] \[flow:f6f2187d.f17ca8\] ------------------|--------------|----------------- > 27 Feb 22:50:52 - \[trace\] \[flow:f6f2187d.f17ca8\] 4ed85eebb0a06cd1 | inject | > 27 Feb 22:50:52 - \[trace\] \[flow:f6f2187d.f17ca8\] 33884147330d3569 | debug | > \`\`\` > > > Here it just stops. > It starts normally when I disconnect my device which is plugged in at /dev/ttyACM0 (Adruino) > > This also happens when I disconnect my device, delete the flow, connect the device again and create and deploy the flow. > > > \### Expected Behavior > > Node-RED not crashing and receiving data from /dev/ttyACM0 > > > \### Steps To Reproduce > > Raspberry Pi 4 > > Docker.io installed via apt and using nodered/node-red image. > > Mounted the device either with -v /dev:/dev or --device /dev/ttyACM0:/dev/ttyACM0 > > Added /etc/udev/rules.d/99-serial.rules on host machine > \`KERNEL=="ttyACM\[0-9\]\*",MODE="0666"\` > so the node-red user can read > > > \### Example flow > > \_No response\_ > > > \### Environment > > \- Node-RED version: latest nodered/node-red docker image > \- Node.js version: latest nodered/node-red docker image > \- npm version: latest nodered/node-red docker image > \- Platform/OS: Linux raspberrypi 5.10.92-v8+ # 1514 SMP PREEMPT Mon Jan 17 17:39:38 GMT 2022 aarch64 GNU/Linux > \- Browser: - I used the USB10 port redirected from ACM0 I had also edited the flows.json file to change the RFlink port. I found my flow again! Cool. ---
**Author:** ![Psoy](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/psoy/32/9005_2.png) [@Psoy](https://community.gladysassistant.com/u/Psoy)\ **Post date:** [November 3, 2022, 6:02pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/44 "2022-11-03T18:02:41Z")
Great 👍 Keep it up ---
**Author:** ![gaetanb76](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaetanb76/32/5911_2.png) [@gaetanb76](https://community.gladysassistant.com/u/gaetanb76)\ **Post date:** [November 7, 2022, 1:13pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/45 "2022-11-07T13:13:03Z")
Hi everyone, J’ai un souci lorsque je veux écrire des données dans un fichier, j’obtiens l’erreur « failed to create file: Error: EACCES: permission denied, mkdir ‹ /NodeRedBackup/20221105 › » J’ai fait un sudo chmod 777 NodeRedBackup/ mais cela n’a rien changé. Est-ce que cela vient du fait que dans ce tuto, lors de l’installation de Node-RED on ne met pas –privileged \ -u root \ Comme dans celui de @pierre-g ---
**Author:** ![elfedagger](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/elfedagger/32/13658_2.png) [@elfedagger](https://community.gladysassistant.com/u/elfedagger)\ **Post date:** [March 25, 2023, 7:41pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/46 "2023-03-25T19:41:40Z")
Hello, I just finished pairing all my RTS shutters with my new RFLink installed using a kit from Nodo shop. Everything works correctly with RFLink Loader; my shutters respond perfectly to my commands. Now I’m trying to get the same result with Node-RED and that’s where I’m stuck. ![Screenshot (9)](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/3/3d3bbaff37b0d80a7539c0b1c53de81e466d9411.png) I followed the tutorial above, I have the correct version of Node-RED, the correct version of serialport and my RFLink is properly connected for transmit and receive. I inject a 1 at the input; the Node replaces it with the shutter command. It works for stop and for open but not for close even though the 3 Nodes have the same configuration. ![Screenshot (8)](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/f/f75c4cc544ec298dc16a17ec5e8d7dfbdf2742af.png) ![Screenshot (11)](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/c/c4a8211b68f6456eadf6f3ba8cb1b0aedd0d0dc6.png) Any idea how to solve this problem? The next step is to replace the manual inputs with an MQTT Node. And there I can’t find how to have 3 different values for open, stop and close. ---
**Author:** ![Psoy](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/psoy/32/9005_2.png) [@Psoy](https://community.gladysassistant.com/u/Psoy)\ **Post date:** [March 25, 2023, 9:56pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/47 "2023-03-25T21:56:15Z")
Good evening @elfedagger how did you find the codes 10;RTS,F00030;0;UP; When you send your commands with the TC, you can read what you send in the debug, can you show it to me? For the transition from Gladys to Node-RED it should be simpler, first solve the closing issue. ---
**Author:** ![elfedagger](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/elfedagger/32/13658_2.png) [@elfedagger](https://community.gladysassistant.com/u/elfedagger)\ **Post date:** [March 25, 2023, 11:01pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/48 "2023-03-25T23:01:19Z")
in the debug for stop and open I have 1 at the input of the Change node and the RTS command at the output, and for closing I had 1 at the input and also 1 at the output at the beginning of the evening and now I have this message.« Error: Invalid ‹ from › property: unsupported type: undefined » ![Capture d’écran (14)](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/7/77e41568c246eb442b14422072c706086681a9ae.png) With my remote control (TC) I receive this as command 20;09;RTS;ID=420e64;SWITCH=01;CMD=DOWN; My rflink is paired with my blinds as an additional remote control. RTS Record: 0 Address: FFFFFF RC: FFFF RTS Record: 1 Address: F00010 RC: 0412 (Hallway blind) RTS Record: 2 Address: F00020 RC: 0412 (Kitchen blind) RTS Record: 3 Address: F00030 RC: 0412 (Living room blind) RTS Record: 4 Address: F00040 RC: 0412 (Bedroom 1 blind) RTS Record: 5 Address: F00050 RC: 0412 (Attic blind) RTS Record: 6 Address: F00060 RC: 0412 (All blinds) RTS Record: 7 Address: FFFFFF RC: FFFF RTS Record: 8 Address: FFFFFF RC: FFFF RTS Record: 9 Address: FFFFFF RC: FFFF RTS Record: 10 Address: FFFFFF RC: FFFF RTS Record: 11 Address: FFFFFF RC: FFFF RTS Record: 12 Address: FFFFFF RC: FFFF RTS Record: 13 Address: FFFFFF RC: FFFF RTS Record: 14 Address: FFFFFF RC: FFFF I deduced these commands which all work with rflink loader Hallway blind: 10;RTS;F00010;0;DOWN; 10;RTS;F00010;0;UP; 10;RTS;F00010;0;STOP; Kitchen blind: 10;RTS;F00020;0;DOWN; 10;RTS;F00020;0;UP; 10;RTS;F00020;0;STOP; Living room blind: 10;RTS;F00030;0;DOWN; 10;RTS;F00030;0;UP; 10;RTS;F00030;0;STOP; Bedroom 1 blind: 10;RTS;F00040;0;DOWN; 10;RTS;F00040;0;UP; 10;RTS;F00040;0;STOP; Attic blind: 10;RTS;F00050;0;DOWN; 10;RTS;F00050;0;UP; 10;RTS;F00050;0;STOP; All blinds: 10;RTS;F00060;0;DOWN; 10;RTS;F00060;0;UP; 10;RTS;F00060;0;STOP; ---
**Author:** ![Psoy](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/psoy/32/9005_2.png) [@Psoy](https://community.gladysassistant.com/u/Psoy)\ **Post date:** [March 26, 2023, 6:29am UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/49 "2023-03-26T06:29:47Z")
> [@elfedagger](#): > > I deduced these commands that all work with rflink loader is it the closing command for a single shutter or for all the shutters that’s not working? did you create a receiver node? ---
**Author:** ![elfedagger](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/elfedagger/32/13658_2.png) [@elfedagger](https://community.gladysassistant.com/u/elfedagger)\ **Post date:** [March 26, 2023, 10:07am UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/50 "2023-03-26T10:07:27Z")
Hello, yes I have a reception node and here I see the commands sent by the TC ![Capture d’écran (16)](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/6/6f1e5ffd592a7c22121e0b916c51a24729e09ee1.png) and the responses from my shutters. I only tested with the living room shutter commands in Node-RED, I will test the others today. With RFLink loader all commands work including the one that controls all the shutters at the same time. I think what’s wrong in Node-RED is the change node for the closing section. The debug shows that I have a 1 at the input of the change node and I still have 1 at the output, whereas I should have the shutter command like on the two other change nodes for stop and for open. ---
**Author:** ![elfedagger](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/elfedagger/32/13658_2.png) [@elfedagger](https://community.gladysassistant.com/u/elfedagger)\ **Post date:** [March 26, 2023, 3:25pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/51 "2023-03-26T15:25:45Z")
I solved my problem without knowing how. I started from scratch on flow 2 and deleted flow 1. ![Capture d’écran (18)|401x500](upload://7OGdiU ---
**Author:** ![elfedagger](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/elfedagger/32/13658_2.png) [@elfedagger](https://community.gladysassistant.com/u/elfedagger)\ **Post date:** [March 26, 2023, 3:28pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/52 "2023-03-26T15:28:41Z")
Now I need to simplify this flow and connect it to Gladys via MQTT. 🤔 🤔 🤔 ---
**Author:** ![Psoy](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/psoy/32/9005_2.png) [@Psoy](https://community.gladysassistant.com/u/Psoy)\ **Post date:** [March 26, 2023, 4:42pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/53 "2023-03-26T16:42:28Z")
Great — you can move on to the next step. If you need, I can explain what I did for my shutters, if you want For moving from Gladys to Node-RED, in Gladys you create an MQTT device with the function: Shutter state look at my display window shutter device: ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/8/809d76a278392b211e3da3db73a2c0b1b0c20770.png) you can set the min and max values as you like — I have -1 0 1. You can set 1 as min and 3 as max so you’ll have the values 1 2 and 3. When you click on your shutter button in the Gladys dashboard (after creating it, of course) the close function will send to Node-RED the min value of your device, so 1; open will send the max value 3; and stop will send the value 2. In Node-RED you create the appropriate MQTT node and then you create a « switch » node (with 3 outputs — you do that with the little « +add » at the bottom left of the window) which will create 3 outputs 1 2 or 3, you connect the outputs to your « change » nodes: close on output 1, stop output 2 and open output 3. ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/0/0d213be9b3ae3c8173507f4a7c51ddd19f445252.png) ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/b/bf4bd8f27c9a61a6b4991d37bc7a7bb6a8e6db62.png) In this window you put 1 instead of -1, 2 instead of 1 and 3 instead of 0. You see that the outputs correspond to the functions you want. If you change the wiring order of the « Change » nodes, you need to change the numbering of the outputs of the « Switch » node Voilà ---
**Author:** ![elfedagger](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/elfedagger/32/13658_2.png) [@elfedagger](https://community.gladysassistant.com/u/elfedagger)\ **Post date:** [March 26, 2023, 5:22pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/54 "2023-03-26T17:22:17Z")
And for the shutter button, what should I do? When I want to add it to the Dashboard I only have the shutter state to display, not a button. Do I also have to create each button with MQTT? I’ve seen in some topics that there was a special button for shutters. ---
**Author:** ![Psoy](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/psoy/32/9005_2.png) [@Psoy](https://community.gladysassistant.com/u/Psoy)\ **Post date:** [March 26, 2023, 5:29pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/55 "2023-03-26T17:29:22Z")
> [@elfedagger](#): > > And for the shutter button, how should I do it? Have you already created devices with MQTT in Gladys for other projects? ---
**Author:** ![elfedagger](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/elfedagger/32/13658_2.png) [@elfedagger](https://community.gladysassistant.com/u/elfedagger)\ **Post date:** [March 26, 2023, 7:41pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/56 "2023-03-26T19:41:20Z")
No, I watched Pierre Gilles’ tutorials and I understood the principle. I created my MQTT node for the living room shutter and it’s connected to Gladys. But I don’t see the button for the shutters. When I edit my dashboard, I only have the shutter’s status and no button available. ---
**Author:** ![elfedagger](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/elfedagger/32/13658_2.png) [@elfedagger](https://community.gladysassistant.com/u/elfedagger)\ **Post date:** [March 26, 2023, 8:15pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/57 "2023-03-26T20:15:04Z")
I found the button, I had left « is this a sensor? » checked when I unchecked the button it appeared. ---
**Author:** ![Psoy](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/psoy/32/9005_2.png) [@Psoy](https://community.gladysassistant.com/u/Psoy)\ **Post date:** [March 26, 2023, 8:16pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/58 "2023-03-26T20:16:34Z")
> [@elfedagger](#): > > I created my MQTT Node p So when you created your MQTT device for the living room, you must give it a function; in « select » you type « shutter », you get a dropdown menu with « Shutter state » and « Shutter position ». You click on « Shutter state » and then you click on the right on « add function » (and there you’ll have a 3-position shutter button). You fill in your function as I wrote above ---
**Author:** ![elfedagger](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/elfedagger/32/13658_2.png) [@elfedagger](https://community.gladysassistant.com/u/elfedagger)\ **Post date:** [March 26, 2023, 8:34pm UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/59 "2023-03-26T20:34:24Z")
Thanks for your help Psoy, it works! 🥳 🥳 ![Capture d’écran (20)](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/8/8c3a096c613f183bddb7f12e0b165558ddb941eb.png) ---
**Author:** ![cce66](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/c/8797f3/32.png) [@cce66](https://community.gladysassistant.com/u/cce66)\ **Post date:** [March 28, 2023, 7:52am UTC](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844/60 "2023-03-28T07:52:37Z")
You can add this feature to your flow to control the roller shutters (VR) 😉 > [@Mini-tuto Sun-Position Nore-red Mqtt pour piloter les volets en fonction de la position du soleil et des mois](https://community.gladysassistant.com/t/mini-tuto-sun-position-nore-red-mqtt-pour-piloter-les-volets-en-fonction-de-la-position-du-soleil-et-des-mois/8028): > > Bonjour, Voici un flow node-red pour injecter la position du soleil dans Gladys via Node-red (azimuth et altitude) [{ "id": "dbd46647b51191ed", "type": "tab", "label": "Sun-Position", "disabled": false, "info": "", "env": [] }, { "id": "a0d0e562.7ad1d8", "type": "debug", "z": "dbd46647b51191ed", "name": "debug 1", "active": false, "tosidebar": true, "console": false, "to… And make a mini-tutorial or publish your final flow to help move things forward for the community!!! 😊 > [@Mini Tuto - Interaction Gladys - IPX800V5 via node-red](https://community.gladysassistant.com/t/mini-tuto-interaction-gladys-ipx800v5-via-node-red/6917): > > Le but de ce tuto est de montrer comment piloter des relais de la plate-forme domotique IPX800V5 de GCE avec Gladys Allez dans l’onglet « Système » [image] Cliquez sur « MQTT » [image] Paramétrez comme suit, avec pour « Serveur: " l’ip du broker mosquito (IP du raspberry ou du Nuc sur lequel est installé Gladys, en « Client ID » le nom que vous voudrez (j’ai mis ici IPX800V5 c’est important pour les paramétrage des Topic dans Node-red) [image] Ensuite on va dans l’onglet « Liens » [image… [Previous page](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844.md?page=2) [Next page](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844.md?page=4)