# Support for the buttons of the Philips Hue Tap Dial Switch (Zigbee2MQTT)

**URL:** <https://community.gladysassistant.com/t/support-des-boutons-du-philips-hue-tap-dial-switch-zigbee2mqtt/11424>\
**Category:** Demande de fonctionnalités\
**Created:** [October 26, 2026, 12:15pm UTC](https://community.gladysassistant.com/t/support-des-boutons-du-philips-hue-tap-dial-switch-zigbee2mqtt/11424 "2026-10-26T12:15:39Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![curing](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/curing/32/22964_2.png) [@curing](https://community.gladysassistant.com/u/curing)\
**Post date:** [October 26, 2026, 12:15pm UTC](https://community.gladysassistant.com/t/support-des-boutons-du-philips-hue-tap-dial-switch-zigbee2mqtt/11424/1 "2026-10-26T12:15:39Z")

</div>

Hello,

I would like to be able to use the **Philips Hue Tap Dial Switch** (model: **RDM002** ) in Gladys scenes via the Zigbee2MQTT integration.

**Observation:**

- Z2M correctly receives the presses: `zigbee2mqtt/Living Room Remote 1` publishes `"action":"button_1_press"`, then `"action":"button_1_press_release"`.
- In Gladys, the device is correctly created with a “Button Click” feature, but it has **no state in the history**. The Battery and Signal Strength features, however, each have over 1,200 states.
- A scene triggered on “Button Click” therefore never starts.

**Request:**  
Add in Gladys the actions of this model (`button_1` to `button_4`: press, press\_release, hold, hold\_release, and if possible the rotation of the dial), as was done for the Hue Dimmer Switch v2 in version 4.74.

**Context:** Gladys on TrueNAS (Docker), Zigbee2MQTT, Sonoff ZBDongle-E key.

Thanks!

Related thread: [Hue Tap Dial Switch problème](https://community.gladysassistant.com/t/hue-tap-dial-switch-probleme/11387)

---

<div class="post-metadata">

**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\
**Post date:** [October 26, 2026, 9:30pm UTC](https://community.gladysassistant.com/t/support-des-boutons-du-philips-hue-tap-dial-switch-zigbee2mqtt/11424/2 "2026-10-26T21:30:04Z")

</div>

Hi @curing,

Thanks for the diagnosis, it was spot on: Gladys didn’t recognize any of the Tap Dial actions, so the « Button Click » feature never received any status.

I opened a PR to fix this: [fix(zigbee2mqtt): support Hue Tap Dial switch (RDM002) button actions by cicoub13 · Pull Request #3282 · GladysAssistant/Gladys · GitHub](https://github.com/GladysAssistant/Gladys/pull/3282)

**What is covered** , for the 4 buttons:

- short press (`button_N_press_release`) → **« Button N single click »**
- long press (`button_N_hold_release`) → **« Button N long click »**

In your scene, you’ll just need to choose for example « Button 1 single click » as the trigger.

Gladys only reads **button releases**. A short press sends `press` then `press_release`. A long press sends `press`, then `hold` (possibly several times as long as you hold the button), then `hold_release`. By only reading the releases, each press triggers the scene once, and a long press doesn’t also trigger the short press.

**What is not covered: the wheel.** It sends a message for each notch, so a scene linked to the rotation would start several times with each gesture. To vary the brightness, the `genLevelCtrl` binding you’ve already set up in Z2M remains the best solution, as it is much more responsive than a scene.

The fix will be available once the PR has been reviewed and merged into a future version of Gladys. I’ll keep you posted!

---

<div class="post-metadata">

**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\
**Post date:** [November 3, 2026, 9:28am UTC](https://community.gladysassistant.com/t/support-des-boutons-du-philips-hue-tap-dial-switch-zigbee2mqtt/11424/3 "2026-11-03T09:28:05Z")

</div>

It’s fixed and available in version [5.3.1](https://github.com/GladysAssistant/Gladys/releases/tag/v5.3.1)

Keep us posted

---

<div class="post-metadata">

**Author:** ![curing](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/curing/32/22964_2.png) [@curing](https://community.gladysassistant.com/u/curing)\
**Post date:** [November 3, 2026, 11:29am UTC](https://community.gladysassistant.com/t/support-des-boutons-du-philips-hue-tap-dial-switch-zigbee2mqtt/11424/4 "2026-11-03T11:29:19Z")

</div>

All good on my end! Thanks and well done!
