# TostCorp: Control your Somfy RTS blinds via MQTT **URL:** \ **Category:** Configuration\ **Created:** [September 9, 2021, 11:30am UTC](https://community.gladysassistant.com/t/tostcorp-piloter-ses-volets-somfy-rts-en-mqtt/6511 "2021-09-09T11:30:28Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [September 9, 2021, 11:30am UTC](https://community.gladysassistant.com/t/tostcorp-piloter-ses-volets-somfy-rts-en-mqtt/6511/1 "2021-09-09T11:30:28Z")
Hi everyone! I came across this YouTube video today: https://www.youtube.com/embed/rzkzb9LQDC4?feature=oembed&wmode=opaque Apparently it’s a device that lets you control Somfy RTS shutters via MQTT — it looks amazing! Anyone familiar with it? Has anyone tried it? 🙂 Edit: apparently no longer available, I now recommend this tutorial: [Intégrer ses équipements Somfy à Gladys via Matterbridge | Gladys Assistant](https://gladysassistant.com/fr/docs/integrations/somfy-tahoma/) ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [February 15, 2022, 12:36pm UTC](https://community.gladysassistant.com/t/tostcorp-piloter-ses-volets-somfy-rts-en-mqtt/6511/2 "2022-02-15T12:36:41Z")
The link is no longer available on Amazon, but I’m interested in knowing how to replace a Somfy remote to control with Gladys! I have a projector screen that can only be lowered with the Somfy remote, it’s not very practical to create a « movie » scene. ---
**Author:** ![cce66](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/c/8797f3/32.png) [@cce66](https://community.gladysassistant.com/u/cce66)\ **Post date:** [February 15, 2022, 1:03pm UTC](https://community.gladysassistant.com/t/tostcorp-piloter-ses-volets-somfy-rts-en-mqtt/6511/3 "2022-02-15T13:03:35Z")
Then there’s the RFPlayer taken over by GCE! > **[GCE Electronics RFPlayer USB - Interface émetteur / récepteur RF433 et RF868...](https://www.domotique-store.fr/domotique/usages/volets-roulants-automatiques-a-distance-sans-fil/passerelles-et-emetteurs-somfy-rts-somfy-velux-io-bubendorff-id-deltadore-x2d-x3d-etc/741-gce-electronics-rfplayer-usb-interface-emetteur-recepteur-rf433-et-rf868-compatible-somfy-rts-chacon-dio-10-x2d-etc)** > > GCE Electronics RFPlayer USB - Interface émetteur / récepteur RF433 et RF868 compatible Somfy RTS, Chacon DiO 1.0, X2D, etc. : caractéristiques, compatibilité et guide d'achat. Domotique Store, le guide de la maison connectée. ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/1/19bdd2061dd00f842c1e0bf71e87aae88cad62db.png) ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [February 15, 2022, 3:04pm UTC](https://community.gladysassistant.com/t/tostcorp-piloter-ses-volets-somfy-rts-en-mqtt/6511/4 "2022-02-15T15:04:00Z")
Ouch, 99€ to replace a remote, that’s not cheap 😅 ---
**Author:** ![cce66](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/c/8797f3/32.png) [@cce66](https://community.gladysassistant.com/u/cce66)\ **Post date:** [February 15, 2022, 3:06pm UTC](https://community.gladysassistant.com/t/tostcorp-piloter-ses-volets-somfy-rts-en-mqtt/6511/5 "2022-02-15T15:06:02Z")
Especially since at GCE they just went up to 105! 🤣 > **[RF Player - Clé USB radio 433 Mhz et 868 Mhz multiprotocoles](https://gce-electronics.com/fr/produits-radio/1777-rf-player-3770008041004.html)** > > Le RFPlayer est une télécommande radio USB 433Mhz et 868Mhz compatible avec de multiples protocoles comme le Somfy RTS, Deltadore X2D, Chacon, BLYSS Well at the same time it has a lot of features! ---
**Author:** ![journaldethomas](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/journaldethomas/32/9500_2.png) [@journaldethomas](https://community.gladysassistant.com/u/journaldethomas)\ **Post date:** [February 16, 2022, 12:38pm UTC](https://community.gladysassistant.com/t/tostcorp-piloter-ses-volets-somfy-rts-en-mqtt/6511/6 "2022-02-16T12:38:42Z")
Being the author of the video linked in the first post, I might be able to help you if you have any questions 😁 I will try to use this tostcorp via Gladys and I will not fail to give you feedback even if I might have some questions myself by then with the use of MQTT discovering Gladys 😉 ---
**Author:** ![Seb](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/s/8edcca/32.png) [@Seb](https://community.gladysassistant.com/u/Seb)\ **Post date:** [August 25, 2023, 4:33pm UTC](https://community.gladysassistant.com/t/tostcorp-piloter-ses-volets-somfy-rts-en-mqtt/6511/7 "2023-08-25T16:33:07Z")
Hello, I finally managed to find a Raspberry Pi 4 and an RFPlayer dongle to control my Somfy RTS blinds. I’m a complete novice and I wanted to know if anyone has already used RFPlayer with Gladys and, as a cherry on top, to control their Somfy blinds. I’m open to any information. Thanks ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [August 26, 2023, 9:02am UTC](https://community.gladysassistant.com/t/tostcorp-piloter-ses-volets-somfy-rts-en-mqtt/6511/8 "2023-08-26T09:02:21Z")
@Seb Gladys is not currently compatible with the RF-Player, however there is a tutorial on the forum to do it using Gladys + Node-RED 🙂 > [@Rflink, Node Red et Gladys](https://community.gladysassistant.com/t/rflink-node-red-et-gladys/6844): > > Bonjour, Je ne modifie pas le tuto pour garder l’historique . Je fais une mise à jour importante : A l’heure d’aujourd’hui Le 20-09-2024, NODE\_RED a évolué et est en version 4.0 et node-red-node-serialport est en version 2.0.3 la version de node-red intégrée a Gladys est en 3.1.15 et node-red-node-serialport est en version 2.0.3 On a plus besoin de rétrograder la version de node-red-node-serialport à la 0.15.0 La version 2.0.3 fonctionne très bien avec le Rflink, donc on peut passer le par… ---
**Author:** ![tiboys](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tiboys/32/17668_2.png) [@tiboys](https://community.gladysassistant.com/u/tiboys)\ **Post date:** [April 1, 2024, 9:12am UTC](https://community.gladysassistant.com/t/tostcorp-piloter-ses-volets-somfy-rts-en-mqtt/6511/9 "2024-04-01T09:12:29Z")
Hi everyone, I personally use an earlier version of this module that works pretty well but has dependencies on a server… without really knowing why. There are some occasional bugs with shutters getting mixed up with each other… Since I like being autonomous and controlling my data, I put together a small transmitter module based on the original code. It works very well with ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [April 2, 2024, 4:42pm UTC](https://community.gladysassistant.com/t/tostcorp-piloter-ses-volets-somfy-rts-en-mqtt/6511/10 "2024-04-02T16:42:01Z")
> [@tiboys](#): > > It works very well with a bit of MQTT in Gladys. > If anyone’s interested, I’ll put together a short tutorial. I think a short tutorial is a good idea because I regularly have people asking me how to control their Somfy with Gladys 🙂 ---
**Author:** ![tiboys](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tiboys/32/17668_2.png) [@tiboys](https://community.gladysassistant.com/u/tiboys)\ **Post date:** [April 4, 2024, 12:23pm UTC](https://community.gladysassistant.com/t/tostcorp-piloter-ses-volets-somfy-rts-en-mqtt/6511/11 "2024-04-04T12:23:32Z")
> [@pierre-gilles](#): > > I think it’s a good idea, a short tutorial because I regularly have people asking me how to control their Somfy with Gladys 🙂 It’s done, Chief > [@Fabriquer son émetteur somfy domotisé](https://community.gladysassistant.com/t/fabriquer-son-emetteur-somfy-domotise/8818): > > Salut tout le monde, petit tutoriel pour créer émetteur de commande somfy. Fonctionnement : Ce tuto vous permet de réaliser un émetteur 433.42mhz connecté en wifi au broker mqtt de Gladys et des boutons de commandes type volet. Vous pourrez ainsi commander des stores, volets roulants ou autre système fonctionnant sur le principe de commande Somfy. Prérequis Vous aurez besoin de : Un ESP8266 mini board (ou autre mais avec wifi pour se connecter au réseau et 5v sur broches) Un émetteur 433m…