# TUTORIAL: Control your Somfy IO shutters with Node-RED and the Freebox Delta security pack

**URL:** <https://community.gladysassistant.com/t/tuto-piloter-ses-volets-somfy-io-avec-node-red-et-le-pack-securite-de-la-freebox-delta/8400>\
**Category:** Tutoriels\
**Created:** [October 12, 2023, 9:38pm UTC](https://community.gladysassistant.com/t/tuto-piloter-ses-volets-somfy-io-avec-node-red-et-le-pack-securite-de-la-freebox-delta/8400 "2023-10-12T21:38:02Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\
**Post date:** [October 12, 2023, 9:38pm UTC](https://community.gladysassistant.com/t/tuto-piloter-ses-volets-somfy-io-avec-node-red-et-le-pack-securite-de-la-freebox-delta/8400/1 "2023-10-12T21:38:03Z")

</div>

**1) Freebox Home**

To control these shutters from the Free API (Node-RED) or other, you first need to pair these shutters with the Freebox Home application. If the shutters are not integrated into the Free application, they will not be accessible from Node-RED and therefore from Gladys.

**2) Creating a virtual device in the Gladys MQTT integration**

Prerequisite: Install the MQTT broker in Gladys.

> **[MQTT | Gladys Assistant](https://gladysassistant.com/docs/integrations/mqtt/)**
>
> Connect MQTT devices to Gladys Assistant: configure an MQTT broker and exchange data in both directions between Gladys and your sensors and actuators.

Add a virtual device in the MQTT integration with the features **Shutter Position** and **Shutter State**.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/7/743d109e2a66f2cdd2de0f67e2e7b19afc2752c5.png)

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/0/021d828b59c6f7bcc7802cf1915a878cbf6b5b99.png)

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/2/2dc6163157a8ca9411c6055fff25c52fa620aac7.png)

**3) Installation in Node-RED**

Prerequisite: Have Node-RED installed and the MQTT broker configured. If needed, check out the video by @Pierre-Gilles

[![](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/c/c9a7666ab602efb9151f7867a98cb81dffa0add5.jpeg "Intégrer Node-RED avec Gladys Assistant en MQTT") ](https://www.youtube.com/watch?v=bpmHzR8_S5g)

To control your shutters from Node-RED, you need to install **node-red-contrib-freebox**.  
To do this, go to the Node-RED menu and click on **Manage palette**.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/8/815c30fd3d6a6fe498192ede664f8beb7504e705.png)

In the Install tab, search for freebox and install **node-red-contrib-freebox**.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/0/0b4003174ae9901a83cb763e131c3389950ece9c.png)

Once installed, the Freebox nodes will then be available in the left bar.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/1/12b06db2d41d6ec3a146e32522d47af087e3c2a3.png)

**4) Configuring the connection with the Freebox.**

Add an **api** node to your Node-RED flow and double-click to open the properties page.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/5/52e2f36181c09c636bdda6004745690c1269d506.png)

On the server line, click the pencil to create a new Freebox.

Enter the URL of your Freebox and the port

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/1/19846c6fd9d76b846db9e8146f54cac52826851f.png)

Click **Add** to add the configuration.

To test the connection, you can add an **Inject** node as input and a **Debug** node as output of the API node.

In the **Inject** node, send the message below. This will retrieve all connected devices from your Freebox as well as their status. The result of this flow will allow you to retrieve the identifiers of our shutters later.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/7/72f1067df9336dd7431da188d0fb6e5f4c70d502.png)

An image of the flow

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/3/3876c40fbeea9f652ee25555f3e9a8b55c879583.png)

The code of this flow to import directly into Node-Red.

```auto
[
    {
        "id": "1d67dee27a16208d",
        "type": "group",
        "z": "d7c3929073ea7b03",
        "name": "Call API Freebox",
        "style": {
            "fill": "#dbcbe7",
            "label": true,
            "color": "#000000"
        },
        "nodes": [
            "4f8f16965ae54f50",
            "72e75292b4cb21f9",
            "7dd73ca182891c1b"
        ],
        "x": 1254,
        "y": 699,
        "w": 552,
        "h": 82
    },
    {
        "id": "4f8f16965ae54f50",
        "type": "api",
        "z": "d7c3929073ea7b03",
        "g": "1d67dee27a16208d",
        "name": "",
        "url": "",
        "server": "35b9faf136b9302a",
        "x": 1530,
        "y": 740,
        "wires": [
            [
                "72e75292b4cb21f9"
            ]
        ]
    },
    {
        "id": "72e75292b4cb21f9",
        "type": "debug",
        "z": "d7c3929073ea7b03",
        "g": "1d67dee27a16208d",
        "name": "",
        "active": true,
        "tosidebar": true,
        "console": false,
        "tostatus": false,
        "complete": "payload",
        "targetType": "msg",
        "statusVal": "",
        "statusType": "auto",
        "x": 1690,
        "y": 740,
        "wires": []
    },
    {
        "id": "7dd73ca182891c1b",
        "type": "inject",
        "z": "d7c3929073ea7b03",
        "g": "1d67dee27a16208d",
        "name": "/home/tileset",
        "props": [
            {
                "p": "url",
                "v": "/home/tileset/all",
                "vt": "str"
            }
        ],
        "repeat": "",
        "crontab": "",
        "once": false,
        "onceDelay": 0.1,
        "topic": "",
        "x": 1370,
        "y": 740,
        "wires": [
            [
                "4f8f16965ae54f50"
            ]
        ]
    },
    {
        "id": "35b9faf136b9302a",
        "type": "freebox-server",
        "host": "https://mafreebox.freebox.fr",
        "port": "443"
    }
]

```

During the first request, you will need to validate the application directly on the front panel of your Freebox Delta.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/9/94e2e5373519497ee52d0a8f7a414380821cc78a.jpeg)

The name Node-RED will appear on the front panel.  
**Warning:** There is a time limit to accept the request. If you do not validate, the Freebox will refuse the connection with Node-RED.

This is not all on the Freebox side, you will also need to authorize the reading of the security pack in the Freebox settings.

To do this, go to Freebox OS ( [https://mafreebox.freebox.fr](https://mafreebox.freebox.fr/)), log in and go to **Freebox Settings** and **Access Management**

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/8/837699aaa7453743bf913d6c8d766bd71547495f.png)  
 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/6/6777cded7e95e6be3078e285b0f419293a0f4ee2.png)

In Access Management, in the Application tab, you should find a line corresponding to Node-RED

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/4/45165048aefc9672c0c90352f89f7cbc8a0c8ee0.png)

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/9/9f9fc714638070cf7123b2198f0023242bcefb8f.png)

Click on the pencil on the right to modify the permissions.  
 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/6/6c41036eb4ed3c77307b0cfe0ac61856439f57d6.png)

Check the box Home Automation and Alarm Management  
 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/c/c20f38a9ee3ba10d39fd2b27fb40f00822bd199c.png)

**5) Creating the flow to read the position of a shutter**

![image](https://gladys-assistant-community.b-cdn.net/uploads/default/optimized/2X/3/3d443a7c301486643ad9b903f5dd9828f8f56bbc_2_690x48.png)

You will need to configure these 3 nodes and adapt them according to your installation.

**1. Poll free node**

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/f/fe1e2423760f2b7c02b5de8056c2b1fb60398c3e.png)

**Name:** name of your shutter  
**Url:** url to query the Free API on the position of your shutter. Here you will only need to change the value 30 and indicate the node\_id value of your shutter. (see below to find the node\_id of your shutter)  
**Interval:** period in ms for querying the API. If you set this value to 3000, it means that Node-RED will send a request to the Freebox every 3s.  
**Server:** indicate here your Freebox created previously. You should find this choice by pressing the arrow

**How to find the node\_id of your shutter?**  
To find the node\_id, simply run the first flow and look for the value in the return.  
Expand the table obtained until you find the indication **action: «&nbsp;store\_slider&nbsp;»**

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/1/176e587770c3521f42d23cf89e1527f545a42e64.png)  
Below you can read the identifier of your shutter. For me, it is therefore the identifier **30**.

**2. Function node**  
The ‹&nbsp;Get only the value&nbsp;› node does not need to be modified. The function reverses the value obtained to display it correctly in Gladys.

**3. MQTT OUT node**

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/b/b25662d5f2fe42345779cb027a87e53748772380.png)

Indicate the value of the MQTT topic of your MQTT device in **MQTT Topic to Publish**.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/1/114c674ddaa6ae032977ea3d17ebb7f244a929e4.png)

The result in Gladys, you will have a reading of the position of your shutter.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/e/e53b4f00349b4165750ae66b90f14e660bea5f11.png)

Below is the Node-RED flow

```auto
[
    {
        "id": "83c677d56359578d",
        "type": "poll",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "Office Shutter",
        "url": "/home/tileset/30",
        "interval": "3000",
        "server": "35b9faf136b9302a",
        "x": 1150,
        "y": 540,
        "wires": [
            [
                "633f74301050d2f8"
            ]
        ]
    },
    {
        "id": "633f74301050d2f8",
        "type": "function",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "Get only the value",
        "func": "msg.payload = 100 - msg.payload[0].data[0].value;\nreturn msg;",
        "outputs": 1,
        "noerr": 0,
        "initialize": "",
        "finalize": "",
        "libs": [],
        "x": 1750,
        "y": 540,
        "wires": [
            [
                "1ab1d89e132c7653"
            ]
        ]
    },
    {
        "id": "1ab1d89e132c7653",
        "type": "mqtt out",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "Update Gladys value",
        "topic": "gladys/master/device/mqtt:office_shutter/feature/mqtt:office_shutter_position/state",
        "qos": "2",
        "retain": "",
        "respTopic": "",
        "contentType": "",
        "userProps": "",
        "correl": "",
        "expiry": "",
        "broker": "05eac840560ca08c",
        "x": 2080,
        "y": 540,
        "wires": []
    },
    {
        "id": "35b9faf136b9302a",
        "type": "freebox-server",
        "host": "https://mafreebox.freebox.fr",
        "port": "443"
    },
    {
        "id": "05eac840560ca08c",
        "type": "mqtt-broker",
        "name": "GladysMQTT",
        "broker": "192.168. ***.***",
        "port": "1883",
        "clientid": "",
        "autoConnect": true,
        "usetls": false,
        "protocolVersion": "4",
        "keepalive": "60",
        "cleansession": true,
        "birthTopic": "",
        "birthQos": "0",
        "birthPayload": "",
        "birthMsg": {},
        "closeTopic": "",
        "closeQos": "0",
        "closePayload": "",
        "closeMsg": {},
        "willTopic": "",
        "willQos": "0",
        "willPayload": "",
        "willMsg": {},
        "userProps": "",
        "sessionExpiry": ""
    }
]

```

**6) Creating the flow to change the position of a shutter**

![image](https://gladys-assistant-community.b-cdn.net/uploads/default/optimized/2X/e/e3f5213a971c88b99cf66357b8b1b8921070415a_2_690x42.png)

**1. MQTT IN node**

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/c/c4ea46d62968eb53c3a5824f480370227c391084.png)

**Server** : Your Gladys MQTT broker  
**Topic** : The topic of your slider device retrieved from the MQTT integration corresponding to the position of your shutter.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/4/445c96c06701ff0ef479e02721bd37020aa0608b.png)

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/a/adb9ec0d39c6defa7824787bcc2d41560db83aee.png)

**2. Function node**  
The ‹&nbsp;Convert to the correct value&nbsp;› node will require you to modify the identifiers in the URL to use those of your shutter. There are 2 identifiers to retrieve: `node_id`, which corresponds to your shutter, and `ep_id`, which corresponds to the functionality of your shutter.  
The message URL is in this format «&nbsp;/home/endpoints/ **node\_id** / **ep\_id** &nbsp;»

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/3/32fd8530af835a6f228588291a5dfc58d1d7ef0d.png)  
To retrieve these identifiers, use the first flow I gave you.  
 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/c/c885571dbca41636090f7be0d66e7b709881a710.png)  
The `node_id` is always the same as in the previous flow.  
The `ep_id` is found in the data section and it is the position functionality. So here for my shutter the value 3.

This value must be the same for everyone.

**3. Free API node**  
Specify the URL of your Freebox as in the first flow.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/f/ff9b3bf356bbde3132754a415e2297fb0b50468f.png)

Below is the flow to import into node-RED.

```auto
[
    {
        "id": "42f1d4ec5102ed80",
        "type": "mqtt in",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "Gladys value",
        "topic": "gladys/device/mqtt:volet_bureau/feature/mqtt:position_volet_bureau/state",
        "qos": "2",
        "datatype": "auto-detect",
        "broker": "05eac840560ca08c",
        "nl": false,
        "rap": true,
        "rh": 0,
        "inputs": 0,
        "x": 1150,
        "y": 660,
        "wires": [
            [
                "3bb82c10f8678d6a"
            ]
        ]
    },
    {
        "id": "3bb82c10f8678d6a",
        "type": "function",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "Convert to the correct value",
        "func": "msg.url = \"/home/endpoints/30/3\"\nmsg.method = \"PUT\"\nmsg.payload = {\n \"value\": 100 - msg.payload\n}\nreturn msg;",
        "outputs": 1,
        "noerr": 0,
        "initialize": "",
        "finalize": "",
        "libs": [],
        "x": 1540,
        "y": 660,
        "wires": [
            [
                "77d7357b042a5833"
            ]
        ]
    },
    {
        "id": "77d7357b042a5833",
        "type": "api",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "",
        "url": "",
        "server": "35b9faf136b9302a",
        "x": 1950,
        "y": 660,
        "wires": [
            [
                "4efe8217d70b5fe3"
            ]
        ]
    },
    {
        "id": "4efe8217d70b5fe3",
        "type": "debug",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "debug 26",
        "active": true,
        "tosidebar": true,
        "console": false,
        "tostatus": false,
        "complete": "false",
        "statusVal": "",
        "statusType": "auto",
        "x": 2200,
        "y": 660,
        "wires": []
    },
    {
        "id": "05eac840560ca08c",
        "type": "mqtt-broker",
        "name": "GladysMQTT",
        "broker": "192.168. ***.***",
        "port": "1883",
        "clientid": "",
        "autoConnect": true,
        "usetls": false,
        "protocolVersion": "4",
        "keepalive": "60",
        "cleansession": true,
        "birthTopic": "",
        "birthQos": "0",
        "birthPayload": "",
        "birthMsg": {},
        "closeTopic": "",
        "closeQos": "0",
        "closePayload": "",
        "closeMsg": {},
        "willTopic": "",
        "willQos": "0",
        "willPayload": "",
        "willMsg": {},
        "userProps": "",
        "sessionExpiry": ""
    },
    {
        "id": "35b9faf136b9302a",
        "type": "freebox-server",
        "host": "https://mafreebox.freebox.fr",
        "port": "443"
    }
]

```

**7) Creating a flow to change the position of a shutter with a 3-state button (OPEN / STOP / CLOSE)**

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/6/608a3edf2f54ece9f6fd2880d859ad20abab664f.png)

**1. MQTT IN node**

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/e/e5913c8e7ec08b9d516d94531d16c24f09fad969.png)  
**Server** : Your Gladys MQTT broker  
**Topic** : The topic of your device Shutter state to retrieve in the MQTT integration.  
 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/1/1cfe20ba2df2b830dd653a6b80e19af9aa1e72c3.png)

No need to touch the next 2 nodes (json and switch)

The switch will allow you to select the action to execute based on the button press in Gladys.

**2. OPEN STOP CLOSE nodes**  
In these 3 nodes, modify the URL address to indicate the ID of your shutter instead of the value 30.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/4/40c65894348c799ed6c153947023318af2e997f4.png)

**3. Free API node**  
Indicate the URL of your Freebox as in the first flow.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/f/ff9b3bf356bbde3132754a415e2297fb0b50468f.png)

The second part of the flow allows you to select the STOP button in Gladys after 15 seconds.  
 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/f/f2ab2aa931ef22469475985e2430427d026ee346.png)  
 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/9/9eafe532f93c20fc537b9c973f2dd89fbd6b1669.png)  
Here you can see that STOP is grayed out (so selected). I found it better visually to reset the button state to STOP after a certain time. This part can be removed.  
You will just need to configure the MQTT OUT node with the topic of your button. Topic to retrieve in Gladys.

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/f/f2ceb0c381f804485f38f772041867c29c7690aa.png)

Below is the flow to import into node-RED

```auto
[
    {
        "id": "471ec274b89ba7a7",
        "type": "mqtt in",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "Gladys value",
        "topic": "gladys/device/mqtt:volet_bureau/feature/mqtt:cmd_volet_bureau/state",
        "qos": "2",
        "datatype": "auto-detect",
        "broker": "05eac840560ca08c",
        "nl": false,
        "rap": true,
        "rh": 0,
        "inputs": 0,
        "x": 1150,
        "y": 320,
        "wires": [
            [
                "79ea0b61e2b9efd3"
            ]
        ]
    },
    {
        "id": "79ea0b61e2b9efd3",
        "type": "json",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "",
        "property": "payload",
        "action": "",
        "pretty": false,
        "x": 1290,
        "y": 320,
        "wires": [
            [
                "661245a7f638d8d1"
            ]
        ]
    },
    {
        "id": "661245a7f638d8d1",
        "type": "switch",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "",
        "property": "payload",
        "propertyType": "msg",
        "rules": [
            {
                "t": "eq",
                "v": "1",
                "vt": "num"
            },
            {
                "t": "eq",
                "v": "0",
                "vt": "num"
            },
            {
                "t": "eq",
                "v": "-1",
                "vt": "num"
            }
        ],
        "checkall": "true",
        "repair": false,
        "outputs": 3,
        "x": 1410,
        "y": 320,
        "wires": [
            [
                "e67eee566c013802",
                "06446de47c9607fd"
            ],
            [
                "cd893f51cc091045"
            ],
            [
                "51d16ab4960719bd",
                "06446de47c9607fd"
            ]
        ],
        "outputLabels": [
            "Open",
            "Stop",
            "Close"
        ]
    },
    {
        "id": "cd893f51cc091045",
        "type": "function",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "STOP",
        "func": "msg.url = \"/home/endpoints/30/1\"\nmsg.method = \"PUT\"\nmsg.payload = {\n \"value\": null\n}\nreturn msg;",
        "outputs": 1,
        "noerr": 0,
        "initialize": "",
        "finalize": "",
        "libs": [],
        "x": 1710,
        "y": 320,
        "wires": [
            [
                "8654a1df5516031e"
            ]
        ]
    },
    {
        "id": "e67eee566c013802",
        "type": "function",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "OPEN",
        "func": "msg.url = \"/home/endpoints/30/3\"\nmsg.method = \"PUT\"\nmsg.payload = {\n \"value\": 0\n}\nreturn msg;",
        "outputs": 1,
        "noerr": 0,
        "initialize": "",
        "finalize": "",
        "libs": [],
        "x": 1710,
        "y": 280,
        "wires": [
            [
                "8654a1df5516031e"
            ]
        ]
    },
    {
        "id": "51d16ab4960719bd",
        "type": "function",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "CLOSE",
        "func": "msg.url = \"/home/endpoints/30/3\"\nmsg.method = \"PUT\"\nmsg.payload = {\n \"value\": 100\n}\nreturn msg;",
        "outputs": 1,
        "noerr": 0,
        "initialize": "",
        "finalize": "",
        "libs": [],
        "x": 1720,
        "y": 360,
        "wires": [
            [
                "8654a1df5516031e"
            ]
        ]
    },
    {
        "id": "06446de47c9607fd",
        "type": "trigger",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "Wait for stable value",
        "op1": "",
        "op2": "",
        "op1type": "nul",
        "op2type": "payl",
        "duration": "15",
        "extend": true,
        "overrideDelay": false,
        "units": "s",
        "reset": "",
        "bytopic": "all",
        "topic": "topic",
        "outputs": 1,
        "x": 1500,
        "y": 400,
        "wires": [
            [
                "0714f8d0c789b85c"
            ]
        ]
    },
    {
        "id": "534e1350127d6e31",
        "type": "mqtt out",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "Update Gladys value",
        "topic": "gladys/master/device/mqtt:volet_bureau/feature/mqtt:cmd_volet_bureau/state",
        "qos": "2",
        "retain": "",
        "respTopic": "",
        "contentType": "",
        "userProps": "",
        "correl": "",
        "expiry": "",
        "broker": "05eac840560ca08c",
        "x": 2080,
        "y": 400,
        "wires": []
    },
    {
        "id": "0714f8d0c789b85c",
        "type": "function",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "Set value to 0",
        "func": "msg.payload = 0;\nreturn msg;",
        "outputs": 1,
        "noerr": 0,
        "initialize": "",
        "finalize": "",
        "libs": [],
        "x": 1740,
        "y": 400,
        "wires": [
            [
                "534e1350127d6e31"
            ]
        ]
    },
    {
        "id": "8654a1df5516031e",
        "type": "api",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "",
        "url": "",
        "server": "35b9faf136b9302a",
        "x": 2050,
        "y": 300,
        "wires": [
            [
                "d08253b67c85d52f"
            ]
        ]
    },
    {
        "id": "d08253b67c85d52f",
        "type": "debug",
        "z": "facf6f6a9a445bc5",
        "g": "7a04e315ea806549",
        "name": "debug 23",
        "active": true,
        "tosidebar": true,
        "console": false,
        "tostatus": false,
        "complete": "false",
        "statusVal": "",
        "statusType": "auto",
        "x": 2220,
        "y": 300,
        "wires": []
    },
    {
        "id": "05eac840560ca08c",
        "type": "mqtt-broker",
        "name": "GladysMQTT",
        "broker": "192.168. ***.***",
        "port": "1883",
        "clientid": "",
        "autoConnect": true,
        "usetls": false,
        "protocolVersion": "4",
        "keepalive": "60",
        "cleansession": true,
        "birthTopic": "",
        "birthQos": "0",
        "birthPayload": "",
        "birthMsg": {},
        "closeTopic": "",
        "closeQos": "0",
        "closePayload": "",
        "closeMsg": {},
        "willTopic": "",
        "willQos": "0",
        "willPayload": "",
        "willMsg": {},
        "userProps": "",
        "sessionExpiry": ""
    },
    {
        "id": "35b9faf136b9302a",
        "type": "freebox-server",
        "host": "https://mafreebox.freebox.fr",
        "port": "443"
    }
]

```

---

<div class="post-metadata">

**Author:** ![cce66](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/c/8797f3/32.png) [@cce66](https://community.gladysassistant.com/u/cce66)\
**Post date:** [October 13, 2023, 10:25pm UTC](https://community.gladysassistant.com/t/tuto-piloter-ses-volets-somfy-io-avec-node-red-et-le-pack-securite-de-la-freebox-delta/8400/2 "2023-10-13T22:25:07Z")

</div>

@_Will_71

And to control them based on the position of the sun there’s a tutorial here

> [@Mini-tuto Sun-Position Nore-red Mqtt pour piloter les volets en fonction de la position du soleil et des mois](https://community.gladysassistant.com/t/mini-tuto-sun-position-nore-red-mqtt-pour-piloter-les-volets-en-fonction-de-la-position-du-soleil-et-des-mois/8028):
>
> Bonjour, Voici un flow node-red pour injecter la position du soleil dans Gladys via Node-red (azimuth et altitude) [{ "id": "dbd46647b51191ed", "type": "tab", "label": "Sun-Position", "disabled": false, "info": "", "env": [] }, { "id": "a0d0e562.7ad1d8", "type": "debug", "z": "dbd46647b51191ed", "name": "debug 1", "active": false, "tosidebar": true, "console": false, "to…

---

<div class="post-metadata">

**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\
**Post date:** [October 14, 2023, 7:54am UTC](https://community.gladysassistant.com/t/tuto-piloter-ses-volets-somfy-io-avec-node-red-et-le-pack-securite-de-la-freebox-delta/8400/3 "2023-10-14T07:54:19Z")

</div>

OK cool, it’s not a feature I’m interested in, but if it can help someone.

---

<div class="post-metadata">

**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\
**Post date:** [October 14, 2023, 9:07pm UTC](https://community.gladysassistant.com/t/tuto-piloter-ses-volets-somfy-io-avec-node-red-et-le-pack-securite-de-la-freebox-delta/8400/4 "2023-10-14T21:07:29Z")

</div>

My tutorial is finished. 😄

---

<div class="post-metadata">

**Author:** ![gaelbillon](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaelbillon/32/12185_2.png) [@gaelbillon](https://community.gladysassistant.com/u/gaelbillon)\
**Post date:** [October 15, 2023, 5:19pm UTC](https://community.gladysassistant.com/t/tuto-piloter-ses-volets-somfy-io-avec-node-red-et-le-pack-securite-de-la-freebox-delta/8400/5 "2023-10-15T17:19:09Z")

</div>

Hi @_Will_71,  
Great tutorial, just 1 or 2 small details:  
Here specify «&nbsp;only the value&nbsp;» 30…

[quote=«&nbsp;\_Will\_71, post:1, topic:8400&nbsp;»]  
**Nom:** name of your shutter  
**Url:** URL to query the Free API about the position of your shutter… Here

---

<div class="post-metadata">

**Author:** ![Will\_71](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/will_71/32/9582_2.png) [@Will\_71](https://community.gladysassistant.com/u/Will_71)\
**Post date:** [October 15, 2023, 7:08pm UTC](https://community.gladysassistant.com/t/tuto-piloter-ses-volets-somfy-io-avec-node-red-et-le-pack-securite-de-la-freebox-delta/8400/6 "2023-10-15T19:08:55Z")

</div>

Thanks for your feedback.  
For the slider, I just added device in front because it was really to indicate the MQTT functionality.

And I should add the integration image this week.