# \[TUTORIAL\] Mail in the mailbox

**URL:** <https://community.gladysassistant.com/t/tutoriel-courrier-dans-la-boite-aux-lettres/6273>\
**Category:** Tutoriels\
**Created:** [April 21, 2021, 10:06pm UTC](https://community.gladysassistant.com/t/tutoriel-courrier-dans-la-boite-aux-lettres/6273 "2021-04-21T22:06:32Z")\
**Posts on this page:** 1\
**Showing post:** 28

<div class="post-metadata">

**Author:** ![mikael](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/m/f04885/32.png) [@mikael](https://community.gladysassistant.com/u/mikael)\
**Post date:** [January 21, 2022, 6:50pm UTC](https://community.gladysassistant.com/t/tutoriel-courrier-dans-la-boite-aux-lettres/6273/28 "2022-01-21T18:50:24Z")

</div>

> [@pascal\_sapin](#):
>
> This seems to work but with the following sensors close to the Zigbee key
> 
> I have 1 outdoor thermometer and 2 presence sensors
> 
> Problem as soon as I move the sensors away I lose reception  
> I thought that the fact that they are mesh would make everything work much better  
> My question is whether the mesh is configured by default, I don’t think so, because there are 3 or 4 plans star tree etc…

Maybe a problem like I had with a presence sensor and resolved with 4.7.2.

[Here is the topic of the failure I had](https://community.gladysassistant.com/t/conflict-lors-de-lajout-dun-device-z2m/6736/10)

Create a topic in configuration by giving your sensor model so that the developers can see if there is the same error

---

_[View the full topic](https://community.gladysassistant.com/t/tutoriel-courrier-dans-la-boite-aux-lettres/6273)._