# Utilisation du disque par les logs Mosquitto

**URL:** <https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827>\
**Category:** Développement\
**Tags:** zigbee2mqtt\
**Created:** [Janvier 11, 2023, 10:34 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827 "2023-01-11T10:34:56Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\
**Post date:** [Janvier 11, 2023, 10:34 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/1 "2023-01-11T10:34:56Z")

</div>

Salut à tous, spécialement @cicoub13 et @pierre-gilles,

J’ai eu une alerte sur mon instance Gladys (mini-pc), car l’espace disque était faible.  
En investiguant, c’est causé par un conteneur.

![image](https://gladys-assistant-community.b-cdn.net/uploads/default/optimized/2X/8/8aee3f960cf3f6cb6318f901194468fd8714c4f3_2_690x72.png)

Ce conteneur correspond à `eclipse-mosquitto`, utilisé par le service Zigbee2MQTT ou par MQTT, je ne suis pas certain.  
Cela est confirmé par le fichier d’info à la source de ce dossier :

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/6/6cb93676baf6ecdb581f4da4dc3512077f39baa8.jpeg)

En grattant un peu plus loin, un redémarrage du conteneur n’a rien changé. En fait, c’est un fichier unique qui utilise toute la place :

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/1/1e688f99801f5781aaac2bb72294c05bdc04f56d.jpeg)

```auto
/var/lib/docker/containers/9991e6bed47295b41c61b190cfb4168c0a2fe282b561e4afa950ceb8a2dbf781/9991e6bed47295b41c61b190cfb4168c0a2fe282b561e4afa950ceb8a2dbf781-json.log

```

Ce fichier de log utilise 24 Go !

Voici un extrait :

```auto
{"log":"1668743198: Sending PUBLISH to mqttjs_85adae46 (d0, q0, r0, m0, 'zigbee2mqtt/capteurQualitéDeLair', ... (35 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.13707785Z"}
{"log":"1668743198: Received PUBLISH from mqttjs_85adae46 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (283 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.650861947Z"}
{"log":"1668743198: Sending PUBLISH to gladys-main-instance-362751 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (283 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.650892565Z"}
{"log":"1668743198: Sending PUBLISH to gladys-main-instance-372063 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (283 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.650919128Z"}
{"log":"1668743198: Sending PUBLISH to NodeRed-6dda341ee7a029cb (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (283 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.650951475Z"}
{"log":"1668743198: Sending PUBLISH to mqttjs_85adae46 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (283 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.651049516Z"}
{"log":"1668743198: Received PUBLISH from mqttjs_85adae46 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (135 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.651070441Z"}
{"log":"1668743198: Sending PUBLISH to gladys-main-instance-362751 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (135 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.651075885Z"}
{"log":"1668743198: Sending PUBLISH to gladys-main-instance-372063 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (135 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.651112656Z"}
{"log":"1668743198: Sending PUBLISH to NodeRed-6dda341ee7a029cb (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (135 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.651137601Z"}
{"log":"1668743198: Sending PUBLISH to mqttjs_85adae46 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (135 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.651298518Z"}
{"log":"1668743198: Received PUBLISH from mqttjs_85adae46 (d0, q0, r1, m0, 'zigbee2mqtt/capteurQualitéDeLair', ... (35 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.651313521Z"}
{"log":"1668743198: Sending PUBLISH to gladys-main-instance-362751 (d0, q0, r0, m0, 'zigbee2mqtt/capteurQualitéDeLair', ... (35 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.651318495Z"}
{"log":"1668743198: Sending PUBLISH to gladys-main-instance-372063 (d0, q0, r0, m0, 'zigbee2mqtt/capteurQualitéDeLair', ... (35 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.651322586Z"}
{"log":"1668743198: Sending PUBLISH to NodeRed-6dda341ee7a029cb (d0, q0, r0, m0, 'zigbee2mqtt/capteurQualitéDeLair', ... (35 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.651328966Z"}
{"log":"1668743198: Sending PUBLISH to mqttjs_85adae46 (d0, q0, r0, m0, 'zigbee2mqtt/capteurQualitéDeLair', ... (35 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.651354167Z"}
{"log":"1668743198: Received PUBLISH from mqttjs_85adae46 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (283 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.693765258Z"}
{"log":"1668743198: Sending PUBLISH to gladys-main-instance-362751 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (283 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.693813636Z"}
{"log":"1668743198: Sending PUBLISH to gladys-main-instance-372063 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (283 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.693829505Z"}
{"log":"1668743198: Sending PUBLISH to NodeRed-6dda341ee7a029cb (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (283 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.69383429Z"}
{"log":"1668743198: Sending PUBLISH to mqttjs_85adae46 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (283 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.693881662Z"}
{"log":"1668743198: Received PUBLISH from mqttjs_85adae46 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (127 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.693935993Z"}
{"log":"1668743198: Sending PUBLISH to gladys-main-instance-362751 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (127 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.693942686Z"}
{"log":"1668743198: Sending PUBLISH to gladys-main-instance-372063 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (127 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.693996451Z"}
{"log":"1668743198: Sending PUBLISH to NodeRed-6dda341ee7a029cb (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (127 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.694010852Z"}
{"log":"1668743198: Sending PUBLISH to mqttjs_85adae46 (d0, q0, r0, m0, 'zigbee2mqtt/bridge/logging', ... (127 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.694042749Z"}
{"log":"1668743198: Received PUBLISH from mqttjs_85adae46 (d0, q0, r1, m0, 'zigbee2mqtt/capteurQualitéDeLair', ... (27 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.694107082Z"}
{"log":"1668743198: Sending PUBLISH to gladys-main-instance-362751 (d0, q0, r0, m0, 'zigbee2mqtt/capteurQualitéDeLair', ... (27 bytes))\n","stream":"stderr","time":"2022-11-18T03:46:38.694133106Z"}

```

## Correction à prévoir ?

S’agissant probablement d’un «&nbsp;bug&nbsp;», il faudrait forcer la «&nbsp;vidange&nbsp;» de ce fichier tous les jours pendant la sauvegarde de Gladus par exemple.

---

<div class="post-metadata">

**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\
**Post date:** [Janvier 11, 2023, 12:47 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/2 "2023-01-11T12:47:50Z")

</div>

Merci pour l’alerte.  
On pourrait réduire le log\_type pour retenir que les warning/error.  
Je ne vois pas d’option pour réduire la rétention des logs, donc le nettoyage serait à développer par nous 😐

---

<div class="post-metadata">

**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\
**Post date:** [Janvier 11, 2023, 2:11 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/3 "2023-01-11T14:11:27Z")

</div>

Sur l’image raspberry je défini un réglage par défaut dans la conf docker

> <https://github.com/GladysAssistant/gladys-pi-gen/blob/master/gladys/00-docker-install/files/daemon.json>

> **[JSON File logging driver](https://docs.docker.com/config/containers/logging/json-file/#usage)**
>
> Describes how to use the json-file logging driver.

Je te propose de modifier ta conf docker, de delete le log et redémarrer le daemon docker.

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [Janvier 11, 2023, 7:45 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/4 "2023-01-11T19:45:30Z")

</div>

Effectivement il manque l’option "–log-opt max-size=10m " dans le docker run des intégration MQTT (et peut-être Zigbee2mqtt aussi), comme on fait avec le container Gladys ( [Installation avec Docker | Gladys Assistant](https://gladysassistant.com/fr/docs/installation/docker/) )

Il faut le rajouter, c’est un problème je suis d’accord!

Issue créée:

> <https://github.com/GladysAssistant/Gladys/issues/1684>
>
> https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosqu…itto/7827
> 
> \`\`\`
> \--log-driver json-file \\
> \--log-opt max-size=10m \\
> \`\`\`

---

<div class="post-metadata">

**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\
**Post date:** [Janvier 14, 2023, 9:26 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/5 "2023-01-14T09:26:33Z")

</div>

J’ai fait un 1er correctif pour MQTT :

> <https://github.com/GladysAssistant/Gladys/pull/1686>
>
> \### Pull Request check-list
> 
> To ensure your Pull Request can be accepted as fa…st as possible, make sure to review and check all of these items:
> 
> \- \[x\] If your changes affects code, did your write the tests?
> \- \[x\] Are tests passing? (\`npm test\` on both front/server)
> \- \[x\] Is the linter passing? (\`npm run eslint\` on both front/server)
> \- \[x\] Did you run prettier? (\`npm run prettier\` on both front/server)
> \- ~~\[\] If you are adding a new features/services, did you run integration comparator? (\`npm run compare-translations\` on front)~~
> \- \[x\] Did you test this pull request in real life? With real devices? If this development is a big feature or a new service, we recommend that you provide a Docker image to \[the community\](https://community.gladysassistant.com/) for testing before merging.
> \- ~~\[\] If your changes modify the API (REST or Node.js), did you modify the API documentation? (Documentation is based on comments in code)~~
> \- ~~\[\] If you are adding a new features/services which needs explanation, did you modify the user documentation? See \[the GitHub repo\](https://github.com/GladysAssistant/v4-website) and the \[website\](https://gladysassistant.com).~~
> \- ~~\[\] Did you add fake requests data for the demo mode (\`front/src/config/demo.js\`) so that the demo website is working without a backend? (if needed) See \[https://demo.gladysassistant.com\](https://demo.gladysassistant.com).~~
> 
> NOTE: these things are not required to open a PR and can be done afterwards / while the PR is open.
> 
> \### Description of change
> 
> Add log limit on MQTT container.
> I add a new service variable to track the container update.
> Image : \`atrovato/gladys:mqtt-log-limit\`

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [Janvier 20, 2023, 4:59 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/6 "2023-01-20T04:59:29Z")

</div>

Merci @AlexTrovato pour la PR, j’ai testé et ça marche bien de mon côté, j’ai mergé 🙏

Pour info, les containers existant seront automatiquement relancé avec le bon paramètre à la prochaine mise à jour de Gladys, et ça cleanera automatiquement les logs existantes.

---

<div class="post-metadata">

**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\
**Post date:** [Janvier 21, 2023, 9:53 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/7 "2023-01-21T09:53:19Z")

</div>

@pierre-gilles j’ai fait la même pour zigbee, mais celle-ci je ne peut pas la tester, car il faut une clé zigbee pour créer les containers.

> <https://github.com/GladysAssistant/Gladys/pull/1692>
>
> \### Pull Request check-list
> 
> To ensure your Pull Request can be accepted as fa…st as possible, make sure to review and check all of these items:
> 
> \- \[x\] If your changes affects code, did your write the tests?
> \- \[x\] Are tests passing? (\`npm test\` on both front/server)
> \- \[x\] Is the linter passing? (\`npm run eslint\` on both front/server)
> \- \[x\] Did you run prettier? (\`npm run prettier\` on both front/server)
> \- ~~\[\] If you are adding a new features/services, did you run integration comparator? (\`npm run compare-translations\` on front)~~
> \- \[\] Did you test this pull request in real life? With real devices? If this development is a big feature or a new service, we recommend that you provide a Docker image to \[the community\](https://community.gladysassistant.com/) for testing before merging.
> \- ~~\[\] If your changes modify the API (REST or Node.js), did you modify the API documentation? (Documentation is based on comments in code)~~
> \- ~~\[\] If you are adding a new features/services which needs explanation, did you modify the user documentation? See \[the GitHub repo\]~~(https://github.com/GladysAssistant/v4-website) and the \[website\](https://gladysassistant.com).
> \- ~~\[\] Did you add fake requests data for the demo mode (\`front/src/config/demo.js\`) so that the demo website is working without a backend? (if needed) See \[https://demo.gladysassistant.com\](https://demo.gladysassistant.com).~~
> 
> NOTE: these things are not required to open a PR and can be done afterwards / while the PR is open.
> 
> \### Description of change
> 
> Add log limit on Z2M containers.
> I add a new service variable to track the container update.
> Image : \`atrovato/gladys:z2m-log-limit\`
> 
> ⚠️ I am not able to test it on my side due to lack of devices.

---

<div class="post-metadata">

**Author:** ![cicoub13](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/cicoub13/32/4482_2.png) [@cicoub13](https://community.gladysassistant.com/u/cicoub13)\
**Post date:** [Janvier 21, 2023, 11:54 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/8 "2023-01-21T11:54:57Z")

</div>

Tu peux créer une image docker ? Je ferai le test

---

<div class="post-metadata">

**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\
**Post date:** [Janvier 21, 2023, 12:43 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/9 "2023-01-21T12:43:02Z")

</div>

Tu trouveras le nom de l’image dans la description de la PR sur github 😉  
Depuis elle devrait avoir été générée.

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [Janvier 23, 2023, 2:15 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/10 "2023-01-23T02:15:08Z")

</div>

Merci @AlexTrovato ! J’attend le retour de @cicoub13 sur la partie fonctionnelle

Tu voudrais une clé USB Zigbee @AlexTrovato ?

---

<div class="post-metadata">

**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\
**Post date:** [Janvier 23, 2023, 7:21 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/11 "2023-01-23T19:21:16Z")

</div>

Salut,  
Pour le développement c’est vrai que ce serait plus simple que je sois équipé d’une clé et au moins un capteur, surtout que j’envisage d’autres changements, comme pouvoir se connecter à un z2m distant.  
Et ça allergera Vonox, il pourra récupérer son environnement pour lui 😉

---

<div class="post-metadata">

**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\
**Post date:** [Janvier 23, 2023, 7:28 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/12 "2023-01-23T19:28:35Z")

</div>

Ou comment permettre de controler deux maisons à distance pour le coup !

---

<div class="post-metadata">

**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\
**Post date:** [Janvier 23, 2023, 7:56 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/13 "2023-01-23T19:56:42Z")

</div>

C’était du spare @AlexTrovato t’inquiète pas

---

<div class="post-metadata">

**Author:** ![Tlse-vins](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tlse-vins/32/6054_2.png) [@Tlse-vins](https://community.gladysassistant.com/u/Tlse-vins)\
**Post date:** [Janvier 23, 2023, 7:58 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/14 "2023-01-23T19:58:26Z")

</div>

Je peux t’envoyer une clef zigbee2mqtt, j’ai une dont je me sert pas.

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [Janvier 24, 2023, 2:38 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/15 "2023-01-24T02:38:47Z")

</div>

> [@AlexTrovato](#):
>
> Pour le développement c’est vrai que ce serait plus simple que je sois équipé d’une clé et au moins un capteur, surtout que j’envisage d’autres changements, comme pouvoir se connecter à un z2m distant.

Trop bien le Z2M distant 🤩

> [@Tlse-vins](#):
>
> Je peux t’envoyer une clef zigbee2mqtt, j’ai une dont je me sert pas.

Merci @Tlse-vins ! 🙏 Je vous laisser vous débrouiller entre vous pour la clé?

Pour les devices, tu voudrais un ou plusieurs devices @AlexTrovato ? Tu voudrais quoi idéalement ? Le père Noël Gladys Assistant peut passer avec un peu de retard 😛

---

<div class="post-metadata">

**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\
**Post date:** [Janvier 24, 2023, 6:15 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/16 "2023-01-24T06:15:13Z")

</div>

Ahah super, on dira la mère Noël !! ❤

Je pense qu’un actionneur type prise et un capteur de température (ou multi capteur) feront un bon starter kit.  
Mais si on a une idée pour des intégrations plus complexes, ça peut être l’occasion.

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [Janvier 24, 2023, 6:26 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/17 "2023-01-24T06:26:01Z")

</div>

@AlexTrovato Je te propose ça pour la prise:

> **[NOUS - Prise intelligente Zigbee 3.0 + Mesure de consommation](https://www.domadoo.fr/fr/peripheriques/6165-nous-prise-intelligente-zigbee-30-mesure-de-consommation-5907772033517.html?domid=17)**
>
> La prise intelligente Zigbee 3.0 NOUS permet de contrôler tout dispositif électrique traditionnel à distance, via son smartphone ou par la voix.

Comme ça t’as la mesure de la consommation

Pour un capteur température/humidité, tout est en rupture de stock en ce moment, j’avais vu celui là mais pas dispo avant fin février:

> **[NOUS - Capteur de température et d'humidité intelligent Zigbee 3.0 TUYA](https://www.domadoo.fr/fr/peripheriques/6197-nous-capteur-de-temperature-et-humidite-zigbee-30-tuya-5907772033890.html?domid=17)**
>
> Connaissez la température et humidité d'une zone de votre logement en temps réel et à distance depuis votre Smartphone grâce au capteur de température et humidité Zigbee 3.0 NOUS.

Sinon j’ai trouvé un produit un peu «&nbsp;marrant&nbsp;» et qui rend les tests facile vu que tu peux cliquer dessus:

> **[WOOX - Télécommande intelligente 4 boutons Zigbee 3.0](https://www.domadoo.fr/fr/peripheriques/5684-woox-telecommande-intelligente-4-boutons-zigbee-30-8435606701136.html?domid=17)**
>
> Configurez différents modes d'alarme dans votre logement avec la télécommande intelligente WOOX.

Je pense qu’on le gère pas en plus donc ça peut-être sympa 🙂

Sinon tu peux regarde sur cette recherche si tu vois un truc utile: [Soldes Domadoo capteurs Zigbee en stock](https://www.domadoo.fr/fr/53-soldes?q=Type-Capteur/Technologie-ZigBee/Disponibilit%C3%A9-En+stock?domid=17) 😉

---

<div class="post-metadata">

**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\
**Post date:** [Janvier 24, 2023, 6:51 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/18 "2023-01-24T06:51:37Z")

</div>

Les prises ça renvoie une valeur toutes les minutes voire plus en fonction de la consommation. Pratique aussi pour avoir des valeurs en continue.

---

<div class="post-metadata">

**Author:** ![Tlse-vins](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tlse-vins/32/6054_2.png) [@Tlse-vins](https://community.gladysassistant.com/u/Tlse-vins)\
**Post date:** [Janvier 24, 2023, 9:05 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/19 "2023-01-24T09:05:11Z")

</div>

C’est une une CC2652R ZZh que j’ai, si tu veux que je te l’envoie, en MP donne moi ton adresse.

---

<div class="post-metadata">

**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\
**Post date:** [Janvier 24, 2023, 5:48 UTC](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827/20 "2023-01-24T17:48:26Z")

</div>

Elle est top celle là !

[Page suivante](https://community.gladysassistant.com/t/utilisation-du-disque-par-les-logs-mosquitto/7827.md?page=2)