# \[V4\] Sonoff Tasmota **URL:** \ **Category:** Développement\ **Created:** [December 8, 2019, 10:03am UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115 "2019-12-08T10:03:52Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [December 8, 2019, 10:03am UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/1 "2019-12-08T10:03:52Z")
Hello everyone, you already know that the Sonoff integration service is already present in Gladys V4. On the Tasmota wiki, all devices ([Modules](https://github.com/arendst/Tasmota/wiki/Modules)) supported are listed. Today, only 3 of them are « really » managed: - sonoff basic - sonoff pow - sonoff s26 - sonoff mini - sonoff 4CH - sonoff dual R2 I am therefore posting this message to ask members of the community who have devices flashed with Tasmota to help me complete the V4 service. Tell me what your devices are 🙂 We will determine together, case by case, how to proceed. Thank you for your participation. **– EDIT –** Sonoff Tasmota becomes Tasmota. Most Tasmota-compatible devices are supported by Gladys. Please indicate if a device does not work correctly in Gladys. ---
**Author:** ![Tlse-vins](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tlse-vins/32/6054_2.png) [@Tlse-vins](https://community.gladysassistant.com/u/Tlse-vins)\ **Post date:** [December 8, 2019, 10:37am UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/2 "2019-12-08T10:37:16Z")
I have a dual R2, I’ll keep you posted. ---
**Author:** ![Tlse-vins](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tlse-vins/32/6054_2.png) [@Tlse-vins](https://community.gladysassistant.com/u/Tlse-vins)\ **Post date:** [December 8, 2019, 12:53pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/3 "2019-12-08T12:53:34Z")
What information do you need? ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [December 8, 2019, 1:03pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/4 "2019-12-08T13:03:06Z")
If you can send me the MQTT messages sent by it during the different actions (switch 1 / switch 2). You can use different MQTT client tools to capture these messages. On Windows, from the Microsoft Store, I use MQTTBox to capture this kind of messages. And if this device has other features, I am interested in knowing (energy meter, temperature… ???). Edit: Is it properly flashed with Tasmota? ---
**Author:** ![Tlse-vins](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tlse-vins/32/6054_2.png) [@Tlse-vins](https://community.gladysassistant.com/u/Tlse-vins)\ **Post date:** [December 8, 2019, 2:01pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/5 "2019-12-08T14:01:41Z")
Okay, I’ll try to check that out this evening. Yes, there is indeed the Tasmota software on it. ---
**Author:** ![Tlse-vins](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tlse-vins/32/6054_2.png) [@Tlse-vins](https://community.gladysassistant.com/u/Tlse-vins)\ **Post date:** [December 8, 2019, 4:01pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/6 "2019-12-08T16:01:24Z")
> [@AlexTrovato](#): > > I use MQTTBox Can you explain how to configure MQTTBox? ![Capture%20MQTTBox](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/8/8f573da8e01b8a7f3c173b4334798a59fa2f7ffd.jpeg) ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [December 8, 2019, 4:38pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/7 "2019-12-08T16:38:30Z")
Ok, based on what I’ve done: - **MQTT Client Name** : the client name (ex: _Gladys_) - **MQTT Client id** : leave as is - **Protocol** : mqtt or mqtts (if secure) - **Host** : the URL of your MQTT broker (ex: _192.168.1.40:1883_) - **Username** : the login if needed - **Password** : the password if needed I left everything else with the default values. Once created, you will arrive on a page where you will need to add 2 subscribers: - stat/+/+ - tele/+/+ ![4_subscribe](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/8/88ff3e8bceae3bb2edd2277539665d0213527787.png) If you put « +/+ », you will see messages from all devices. If you want to filter on your device only, replace the first « + » with the « topic » of the device, the one you specified on the device configuration page. For example: - stat/ **sonoff-plug** /+ - tele/ **sonoff-plug** /+ ---
**Author:** ![Tlse-vins](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tlse-vins/32/6054_2.png) [@Tlse-vins](https://community.gladysassistant.com/u/Tlse-vins)\ **Post date:** [December 8, 2019, 5:00pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/8 "2019-12-08T17:00:11Z")
To avoid polluting the entire topic, I’ll send this to you via private message. ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [December 8, 2019, 10:17pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/9 "2019-12-08T22:17:55Z")
Hi, if you want to test, I have generated a docker image: ```bash docker run -d \ --restart=always \ --privileged \ --network=host \ --name gladys-sonoff \ -p 80:80 \ -e NODE_ENV=production \ -e SERVER_PORT=80 \ -e TZ=Europe/Paris \ -e SQLITE_FILE_PATH=/var/lib/gladysassistant/gladys-production.db \ -v /var/run/docker.sock:/var/run/docker.sock \ -v ${PWD}/gladysassistant:/var/lib/gladysassistant \ -v /dev:/dev \ atrovato/gladys-sonoff:4.0.0-beta-arm ``` Warning, the sonoff image is on the same port as the original Gladys. ---
**Author:** ![Tlse-vins](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tlse-vins/32/6054_2.png) [@Tlse-vins](https://community.gladysassistant.com/u/Tlse-vins)\ **Post date:** [December 9, 2019, 9:07am UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/10 "2019-12-09T09:07:31Z")
I prefer not to test on the same SD card, I will reinstall on another one as soon as I can. ---
**Author:** ![jean\_bruder](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/jean_bruder/32/13_2.png) [@jean\_bruder](https://community.gladysassistant.com/u/jean_bruder)\ **Post date:** [December 10, 2019, 2:26pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/11 "2019-12-10T14:26:23Z")
Hello @AlexTrovato! I have a strip of RDB WIFI LEDs, model AL-LC01, running Tasmota, waiting to be used under Gladys. I’ve already done some digging and found this: [https://nathan.chantrell.net/20170526/arilux-al-lc01-wi-fi-rgb-led-controller-with-mqtt-esp8266/](https://nathan.chantrell.net/20170526/arilux-al-lc01-wi-fi-rgb-led-controller-with-mqtt-esp8266/)! I’ll keep you informed as soon as I have some time to provide MQTT frames. How can I generate ones that will be most useful to you? Thanks for your involvement! Jean ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [December 10, 2019, 6:26pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/12 "2019-12-10T18:26:59Z")
Super @jean_bruder, I will start integrating it according to the information I find on the tasmota git repo, but I’m not sure if the « color » feature is in place on gladys, so testing will be quite difficult. After that, as I said above, I’m open to all messages published on the `stat/+/+` and `tele/+/+` topics. ---
**Author:** ![Pti\_Nico](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pti_nico/32/273_2.png) [@Pti\_Nico](https://community.gladysassistant.com/u/Pti_Nico)\ **Post date:** [December 10, 2019, 6:35pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/13 "2019-12-10T18:35:13Z")
Hello @AlexTrovato, I’m working on a native Sonoff module (and other eWeLink-compatible devices). If you want to take a look: [Github](https://github.com/NickDub/Gladys/tree/ewelink-service) 😉 ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [December 10, 2019, 6:39pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/14 "2019-12-10T18:39:40Z")
Super, but we’re talking about third-party, right? I was thinking of renaming the `sonoff` module to `tasmota`… ---
**Author:** ![Tlse-vins](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/tlse-vins/32/6054_2.png) [@Tlse-vins](https://community.gladysassistant.com/u/Tlse-vins)\ **Post date:** [December 10, 2019, 7:41pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/15 "2019-12-10T19:41:38Z")
Or rather > Sonoff with Tasmota After developing a service without flashing the Sonoff, it’s also great. ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [December 10, 2019, 8:07pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/16 "2019-12-10T20:07:54Z")
Yes, I agree, but I’m a bit confused when I have to create an account on a website on the other side of the world to turn on the lamp next to me. But it’s much easier to set up… So both services are welcome 😉 ---
**Author:** ![Pti\_Nico](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pti_nico/32/273_2.png) [@Pti\_Nico](https://community.gladysassistant.com/u/Pti_Nico)\ **Post date:** [December 11, 2019, 8:09pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/17 "2019-12-11T20:09:05Z")
> [@AlexTrovato](#): > > I had thought of renaming the `sonoff` module to `tasmota`… Good idea, especially since this firmware can work with devices other than Sonoff. On my side, my module will be eWeLink (unofficial). ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [December 14, 2019, 9:05pm UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/18 "2019-12-14T21:05:08Z")
Hello, I did the dev to integrate the AL-LC01 LED strip, according to the information found on Tasmota. Everything is in the Docker image 🙂 ---
**Author:** ![jean\_bruder](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/jean_bruder/32/13_2.png) [@jean\_bruder](https://community.gladysassistant.com/u/jean_bruder)\ **Post date:** [December 17, 2019, 8:56am UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/19 "2019-12-17T08:56:46Z")
@AlexTrovato: I must have missed an episode regarding the automatic version upgrade proposed by @pierre-gilles when we discussed the use of Tower, because I don’t see any new Sonoff hardware at my place? I’ll check that from this WE, I have a few days off 😉 Thanks to you anyway! ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [December 17, 2019, 11:18am UTC](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115/20 "2019-12-17T11:18:48Z")
Hello, the latest Sonoff developments are not yet in the official beta offered by Pierre-Gilles. This is a new test Docker image. If the feedback is good, the developments will be integrated into the official version. [Next page](https://community.gladysassistant.com/t/v4-sonoff-tasmota/5115.md?page=2)