# Zigbee : Fingerbot **URL:** \ **Category:** Configuration\ **Tags:** zigbee2mqtt\ **Created:** [December 10, 2024, 8:15pm UTC](https://community.gladysassistant.com/t/zigbee-fingerbot/9237 "2024-12-10T20:15:55Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [December 10, 2024, 8:15pm UTC](https://community.gladysassistant.com/t/zigbee-fingerbot/9237/1 "2024-12-10T20:15:55Z")
Hello, I’m trying to get this actuator working: > **[Tuya TS0001\_fingerbot control via MQTT | Zigbee2MQTT](https://www.zigbee2mqtt.io/devices/TS0001_fingerbot.html)** > > Integrate your Tuya TS0001\_fingerbot via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway. ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/a/6/a64c16ad03823fed8855cc6a134f2fac3c3844ee.png) The Fingerbot is properly recognized in Zigbee2MQTT and I think I wrote the MQTT messages correctly. ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/a/4/a44cbeedf6ed1108cebe3ada25a4d0d0f567da14.png) Besides, Zigbee is all new to me so I probably messed something up somewhere because nothing triggers the Fingerbot Thank you for your help ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [December 11, 2024, 7:31am UTC](https://community.gladysassistant.com/t/zigbee-fingerbot/9237/2 "2024-12-11T07:31:34Z")
Hello @thekassmachine 🙂 That seems fine to me! Have you looked in the Zigbee2mqtt dev console to see if you notice anything in particular? When you control them from the Zigbee2mqtt interface, does everything work? ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [December 17, 2024, 8:53pm UTC](https://community.gladysassistant.com/t/zigbee-fingerbot/9237/3 "2024-12-17T20:53:58Z")
> [@pierre-gilles](#): > > Interface of Zigbee2mqtt, everything Ok, so I’m starting from scratch… Where is the console located? From the interface I can see the device I paired, but how do I control it? ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [December 18, 2024, 7:27am UTC](https://community.gladysassistant.com/t/zigbee-fingerbot/9237/4 "2024-12-18T07:27:42Z")
I added arrows to your screenshot 🙂 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/7/e/7eadfae4e8b43cef25c66f6ccd543768dcc7d02d.png) ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [December 22, 2024, 9:10pm UTC](https://community.gladysassistant.com/t/zigbee-fingerbot/9237/5 "2024-12-22T21:10:43Z")
![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/f/1/f12cc6f518c72c417a8e6fb799093a5812ca03dc.png) ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/e/0/e07c2cb39e899d489f16ff7e52ef3ffcb62f9146.png) I admit that using Wi‑Fi with the gateway is simpler… but I want to do without the gateway… ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [December 26, 2024, 7:36pm UTC](https://community.gladysassistant.com/t/zigbee-fingerbot/9237/6 "2024-12-26T19:36:15Z")
I also had to send a message and after a few tries I understood that you shouldn’t put an object in the description, just what you want to send. Example for a `get` : ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/1/3/13a9bcf3f3b0e2729689a6df4de85448a39084e5.png) In your case, it would rather be `/set/toggle` with an empty message (`\"\"`) or an `on` depending on your need or the specifics of your object. ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [December 26, 2024, 8:49pm UTC](https://community.gladysassistant.com/t/zigbee-fingerbot/9237/7 "2024-12-26T20:49:55Z")
Thanks Imilcent, I tried but without success… 😕 ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [December 26, 2024, 8:57pm UTC](https://community.gladysassistant.com/t/zigbee-fingerbot/9237/8 "2024-12-26T20:57:51Z")
Too bad ☹ ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [December 26, 2024, 8:59pm UTC](https://community.gladysassistant.com/t/zigbee-fingerbot/9237/9 "2024-12-26T20:59:37Z")
And in the « Log » section of Zigbee2MQTT, if you filter by the name of your device and try the different requests you want to make in Gladys, what do you see? The log should display the error related to your request, which will help understand what isn’t working. ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [January 2, 2025, 9:43am UTC](https://community.gladysassistant.com/t/zigbee-fingerbot/9237/10 "2025-01-02T09:43:27Z")
@thekassmachine so when you control the Fingerbot from the Zigbee2mqtt interface, does it work or not? ---
**Author:** ![thekassmachine](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/t/ed8c4c/32.png) [@thekassmachine](https://community.gladysassistant.com/u/thekassmachine)\ **Post date:** [March 12, 2025, 8:48pm UTC](https://community.gladysassistant.com/t/zigbee-fingerbot/9237/11 "2025-03-12T20:48:19Z")
Good evening, sorry for the late reply… I’ve had a lot to do lately… I’m finally getting back to setting up my Gladys The Fingerbot works via a Zigbee gateway