# Zigbee2MQTT: Ajouter les specifications du Aqara W100 dans Gladys **URL:** \ **Category:** Demandes livrées\ **Created:** [Mai 24, 2025, 9:38 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-ajouter-les-specifications-du-aqara-w100-dans-gladys/9545 "2025-05-24T21:38:08Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![bjm](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/bjm/32/1753_2.png) [@bjm](https://community.gladysassistant.com/u/bjm)\ **Post date:** [Mai 24, 2025, 9:38 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-ajouter-les-specifications-du-aqara-w100-dans-gladys/9545/1 "2025-05-24T21:38:08Z")
**Description** Les 3 boutons (Plus - Centre - Moins) du Aqara W100 ne sont pas reconnus par Gladys. Il faudrait ajouter a la fonction action: | Appuis Bouton | Clic simple | Clic double | Pression clic long | Relâcher clic long | | --- | --- | --- | --- | --- | | PLUS | single\_plus | double\_plus | hold\_plus | release\_plus | | CENTRE | single\_center | double\_center | hold\_center | release\_center | | MOINS | single\_minus | double\_minus | hold\_minus | release\_minus | Ci-dessous log info de zigbee2MQTT `info 2025-05-24 22:13:08z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/thermo-radiateur-sb-chambre-6', payload '{"action":"single_plus","display_off":false,"high_humidity":99.99,"high_temperature":60,"humi_period":30,"humi_report_mode":"threshold","humi_threshold":30,"humidity":43.79,"linkquality":171,"low_humidity":0,"low_temperature":-20,"period":0,"sampling":"standard","sensor":"internal","temp_period":30,"temp_report_mode":"threshold","temp_threshold":5,"temperature":25.17}'` `info 2025-05-24 22:17:04z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/thermo-radiateur-sb-chambre-6', payload '{"action":"double_plus","display_off":false,"high_humidity":99.99,"high_temperature":60,"humi_period":30,"humi_report_mode":"threshold","humi_threshold":30,"humidity":40,"linkquality":178,"low_humidity":0,"low_temperature":-20,"period":0,"sampling":"standard","sensor":"internal","temp_period":30,"temp_report_mode":"threshold","temp_threshold":5,"temperature":25.68}'` `info 2025-05-24 22:19:08z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/thermo-radiateur-sb-chambre-6', payload '{"action":"single_minus","display_off":false,"high_humidity":99.99,"high_temperature":60,"humi_period":30,"humi_report_mode":"threshold","humi_threshold":30,"humidity":46,"linkquality":178,"low_humidity":0,"low_temperature":-20,"period":0,"sampling":"standard","sensor":"internal","temp_period":30,"temp_report_mode":"threshold","temp_threshold":5,"temperature":26.73}'` `info 2025-05-24 22:19:49z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/thermo-radiateur-sb-chambre-6', payload '{"action":"single_center","display_off":false,"high_humidity":99.99,"high_temperature":60,"humi_period":30,"humi_report_mode":"threshold","humi_threshold":30,"humidity":40,"linkquality":167,"low_humidity":0,"low_temperature":-20,"period":0,"sampling":"standard","sensor":"internal","temp_period":30,"temp_report_mode":"threshold","temp_threshold":5,"temperature":27.26}'` `info 2025-05-24 22:21:46z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/thermo-radiateur-sb-chambre-6', payload '{"action":"hold_center","display_off":false,"high_humidity":99.99,"high_temperature":60,"humi_period":30,"humi_report_mode":"threshold","humi_threshold":30,"humidity":37,"linkquality":163,"low_humidity":0,"low_temperature":-20,"period":0,"sampling":"standard","sensor":"internal","temp_period":30,"temp_report_mode":"threshold","temp_threshold":5,"temperature":27.26}'` `info 2025-05-24 22:21:47z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/thermo-radiateur-sb-chambre-6', payload '{"action":"release_center","display_off":false,"high_humidity":99.99,"high_temperature":60,"humi_period":30,"humi_report_mode":"threshold","humi_threshold":30,"humidity":37,"linkquality":167,"low_humidity":0,"low_temperature":-20,"period":0,"sampling":"standard","sensor":"internal","temp_period":30,"temp_report_mode":"threshold","temp_threshold":5,"temperature":27.26}'` ![Capture d’écran de 2025-05-24 23-46-08](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/3/6/36a5d20ecf46d44159cb4717cac4766e254bb088.png) ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [Mai 26, 2025, 7:47 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-ajouter-les-specifications-du-aqara-w100-dans-gladys/9545/2 "2025-05-26T07:47:54Z")
Merci pour la demande de fonctionnalité très complète, c’est très simple à implémenter quand c’est bien expliqué 😃 J’ai fais une PR : > > > \### Pull Request check-list > > To ensure your Pull Request can be accepted as fa…st as possible, make sure to review and check all of these items: > > \- \[x\] If your changes affects code, did your write the tests? > \- \[x\] Are tests passing? (\`npm test\` on both front/server) > \- \[x\] Is the linter passing? (\`npm run eslint\` on both front/server) > \- \[x\] Did you run prettier? (\`npm run prettier\` on both front/server) > \- \[x\] If you are adding a new features/services, did you run integration comparator? (\`npm run compare-translations\` on front) > \- \[\] Did you test this pull request in real life? With real devices? If this development is a big feature or a new service, we recommend that you provide a Docker image to the community (\[french forum\](https://community.gladysassistant.com/)/\[english forum\](https://en-community.gladysassistant.com/)) for testing before merging. > > \### Description of change > > Add Aqara W100 buttons ( https://community.gladysassistant.com/t/zigbee2mqtt-ajouter-les-specifications-du-aqara-w100-dans-gladys/9545 ) ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [Mai 26, 2025, 8:42 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-ajouter-les-specifications-du-aqara-w100-dans-gladys/9545/3 "2025-05-26T08:42:01Z")
Disponible dans Gladys Assistant 4.59 : > [@Gladys Assistant 4.59 : Thermostat Aqara W100, Matter, Scènes!](https://community.gladysassistant.com/t/gladys-assistant-4-59-thermostat-aqara-w100-matter-scenes/9546): > > Salut à tous slight_smile Une nouvelle version de Gladys est disponible partying_faceradio_button Prise en charge des boutons du Thermostat Aqara W100 via Zigbee2MQTT Aqara a récemment sorti un nouveau thermostat connecté, le [Aqara W100](https://www.domadoo.fr/fr/devices-matter/7852-aqara-capteur-de-temperature-et-d-humidite-zigbee-30-et-thread-aqara-climate-sensor-w100-6975833357260.html?domid=17), compatible Zigbee, Thread et Matter. [aqara-capteur-de-temperature-et-d-humidite-zigbee-30-et-thread-aqara-climate-sensor-w100] @bjm est en train de le tester et m’a fait des retours sur des boutons qui n’étaient pas encore pris en charge par Gladys, … ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [Mai 26, 2025, 8:42 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-ajouter-les-specifications-du-aqara-w100-dans-gladys/9545/4 "2025-05-26T08:42:04Z")