# Zigbee2mqtt - Debug **URL:** \ **Category:** Développement\ **Tags:** zigbee2mqtt\ **Created:** [February 1, 2021, 12:57pm UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080 "2021-02-01T12:57:33Z")\ **Posts on this page:** 20\ **Page:** 4
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [October 15, 2021, 6:57am UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/61 "2021-10-15T06:57:51Z")
> [@AlexTrovato](#): > > Should I understand that the old devices still work with the new version? (that backward compatibility is preserved) Yes, it’s great, if I add an already existing device, it is replaced everywhere in Gladys. I did the test with my « PriseBureau ». - Old device: - New device, which I renamed for testing: - List of current devices, only the new one has replaced the old one: - In my dashboard, the old device has been replaced by the new one: * * * Good work in the end, I know we had talked about this kind of feature with @cicoub13 without having the time to implement it. Thanks for your work 🙂 ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [October 15, 2021, 7:02am UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/62 "2021-10-15T07:02:45Z")
Isn’t it dangerous to have an On/Off switch on a fridge? 😛 ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [October 15, 2021, 7:07am UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/63 "2021-10-15T07:07:41Z")
😂 That was my only way to measure my fridge’s consumption. But coupled with a temperature sensor in the fridge, it’s super interesting! 1. I realize it’s not great at temperature management 2. It regularly overconsumes during the day 3. I have two scenarios to check the freezer and fridge temperature, to alert me if there’s a problem (like the outlet being turned off 😉 ) ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [October 15, 2021, 7:09am UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/64 "2021-10-15T07:09:16Z")
Yes you are right, belt and braces 😃 ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [October 15, 2021, 12:51pm UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/65 "2021-10-15T12:51:16Z")
Update to the Z2M doc, it made my day you can’t even imagine ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/c/c427b0c1b2d945d57dd433fdeb0092cbb85b12c4.png) ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [October 15, 2021, 12:57pm UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/66 "2021-10-15T12:57:22Z")
FINALLY!! Because the 5MB page that takes forever to load and doesn’t allow filtering had reached its limits! We’re two in your case 😂 ---
**Author:** ![spenceur](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/spenceur/32/1961_2.png) [@spenceur](https://community.gladysassistant.com/u/spenceur)\ **Post date:** [October 15, 2021, 8:54pm UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/67 "2021-10-15T20:54:00Z")
Hello, does anyone know how to connect to the MQTT broker (e.g., the IDs)? I would like to access it via Node-RED to complete the devices that are in error or not yet integrated. ---
**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\ **Post date:** [October 16, 2021, 1:45am UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/68 "2021-10-16T01:45:23Z")
You can retrieve the credentials in the database (db browser) in the variables table. ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [October 17, 2021, 9:12am UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/70 "2021-10-17T09:12:58Z")
Can I assume that device compatibility is improved and that compatibility with older devices is maintained? (to know if I propose the review of the PR) ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [October 17, 2021, 9:45am UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/71 "2021-10-17T09:45:06Z")
For me Yes! Existing equipment can be added to new and the old ones will then be replaced. ---
**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\ **Post date:** [October 18, 2021, 2:09am UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/72 "2021-10-18T02:09:27Z")
> [@lmilcent](#): > > Existing equipment can be added to new ones and the old ones will then be replaced. That’s not the question! 😛 If we ever deploy this version to everyone, will everyone be forced to disconnect/reconnect all their devices in Gladys (which we don’t want, as it will break everything: existing scenarios, etc.), or will everything work without any manipulation for anyone? Will this break scenarios? For example, if you have already created a scenario in Gladys that involves a Zigbee2mqtt device configured in the old integration, if we switch to the new one, will your old scenario continue to work? ---
**Author:** ![lmilcent](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/lmilcent/32/7023_2.png) [@lmilcent](https://community.gladysassistant.com/u/lmilcent)\ **Post date:** [October 18, 2021, 4:49am UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/73 "2021-10-18T04:49:00Z")
I responded incorrectly, but in my tests everything is functional. I meant to say « It works without breaking the existing system and if the user wants to update their devices, it also does so without breaking compatibility. » ---
**Author:** ![Albenss](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/albenss/32/3916_2.png) [@Albenss](https://community.gladysassistant.com/u/Albenss)\ **Post date:** [October 21, 2021, 9:35am UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/74 "2021-10-21T09:35:49Z")
Hello, on my side everything seems okay after removing and re-adding the devices, however, it seems some mappings are missing. I have an LED controller (RGBWW) that allows me, among other things, to control the warmth of the white or the color, but only the whites are managed in Gladys: ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/0/0d94232397e97559c9a81f8351248b52a08d5541.png) ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/c/c29e0c4284dd2c58246712b5fe7a802d963b129a.png) The controller is a [GL-C-008P](https://www.zigbee2mqtt.io/devices/GL-C-008P.html). ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [October 21, 2021, 4:43pm UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/75 "2021-10-21T16:43:44Z")
Thank you for this feedback. Before adding the new devices, did you check that the old devices were still functional? I will look into these missing features. Were they present before? ---
**Author:** ![Albenss](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/albenss/32/3916_2.png) [@Albenss](https://community.gladysassistant.com/u/Albenss)\ **Post date:** [October 21, 2021, 5:00pm UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/76 "2021-10-21T17:00:35Z")
Yes, still functional! ---
**Author:** ![Albenss](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/albenss/32/3916_2.png) [@Albenss](https://community.gladysassistant.com/u/Albenss)\ **Post date:** [October 21, 2021, 6:44pm UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/77 "2021-10-21T18:44:41Z")
Apologies, I hadn’t seen the second question, no the device was not yet supported by Gladys unfortunately! ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [October 21, 2021, 6:46pm UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/78 "2021-10-21T18:46:05Z")
As long as there is no regression, it’s fine for me 😉 ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [October 21, 2021, 7:03pm UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/79 "2021-10-21T19:03:04Z")
Haha I found the color, I had done all the code, but I forgot to load the mapping file. I’m launching a new version of the image tonight (up to date with the latest changes), it should be ready tomorrow 🙂 ---
**Author:** ![AlexTrovato](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/alextrovato/32/10705_2.png) [@AlexTrovato](https://community.gladysassistant.com/u/AlexTrovato)\ **Post date:** [October 21, 2021, 8:58pm UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/80 "2021-10-21T20:58:27Z")
Well, I’m cheating a little, on the new (new) image, I’m adding a 2nd feature (separate PR), the « Update » button on the device discovery page, so that you don’t have to delete the already registered device to add the new one, BUT I haven’t tested it (still no zigbee2mqtt device 🙂 ) I’m taking the initiative to add this feature in addition to the other one so you don’t have to test twice. However, if there are any problems, we’ll go back to testing with a smaller scope, step by step. ---
**Author:** ![Albenss](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/albenss/32/3916_2.png) [@Albenss](https://community.gladysassistant.com/u/Albenss)\ **Post date:** [October 22, 2021, 5:55am UTC](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080/81 "2021-10-22T05:55:42Z")
Hello, It seems to work better indeed for the color feature that is detected, but I thought we finally had a color selector, is it not yet integrated in Gladys? ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/9/9b06a2cdf9d833081ce5cfcd115f9a0c2b0cf0dd.png) ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/7/73fc0a4db725c154cdbf10a09898bdc4f90fd290.png) [Previous page](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080.md?page=3) [Next page](https://community.gladysassistant.com/t/zigbee2mqtt-debug/6080.md?page=5)