# Zigbee2mqtt non fonctionnel

**URL:** <https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048>\
**Category:** Configuration\
**Tags:** zigbee2mqtt\
**Created:** [Février 23, 2026, 6:09 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048 "2026-02-23T18:09:29Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![prohand](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/prohand/32/15713_2.png) [@prohand](https://community.gladysassistant.com/u/prohand)\
**Post date:** [Février 23, 2026, 6:09 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/1 "2026-02-23T18:09:29Z")

</div>

Hello,

Je ne sais pas si c’est depuis la mise à jour ou bien depuis ma modification de mqtt que j’ai passé dans docker mais plus aucun appareil zigbee2mqtt n’est controlable dans Gladys.

J’ai pas mal de logs comme ceci dans les logs :

```auto
2026-02-23T19:05:07+0100 <error> handleMqttMessage.js:109 () Failed to convert value for device Prise baie informatique: Error: Zigbee2mqqt expose not found on device "Prise baie informatique" with property "linkquality".
    at Zigbee2mqttManager.readValue (/src/server/services/zigbee2mqtt/lib/readValue.js:16:11)
    at /src/server/services/zigbee2mqtt/lib/handleMqttMessage.js:105:31
    at Array.forEach (<anonymous>)
    at Zigbee2mqttManager.handleMqttMessage (/src/server/services/zigbee2mqtt/lib/handleMqttMessage.js:97:41)
    at MqttClient.<anonymous> (/src/server/services/zigbee2mqtt/lib/connect.js:60:12)
    at MqttClient.emit (node:events:519:28)
    at MqttClient._handlePublish (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:1277:12)
    at MqttClient._handlePacket (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:410:12)
    at work (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:321:12)
    at Writable.writable._write (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:335:5)
    at doWrite (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:409:139)
    at writeOrBuffer (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:398:5)
    at Writable.write (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:307:11)
    at TLSSocket.ondata (node:internal/streams/readable:1009:22)
    at TLSSocket.emit (node:events:519:28)
    at addChunk (node:internal/streams/readable:561:12)
    at readableAddChunkPushByteMode (node:internal/streams/readable:512:3)
    at TLSSocket.Readable.push (node:internal/streams/readable:392:5)
    at TLSWrap.onStreamRead (node:internal/stream_base_commons:189:23)
2026-02-23T19:05:07+0100 <error> handleMqttMessage.js:109 () Failed to convert value for device Prise baie informatique: Error: Zigbee2mqqt expose not found on device "Prise baie informatique" with property "power".
    at Zigbee2mqttManager.readValue (/src/server/services/zigbee2mqtt/lib/readValue.js:16:11)
    at /src/server/services/zigbee2mqtt/lib/handleMqttMessage.js:105:31
    at Array.forEach (<anonymous>)
    at Zigbee2mqttManager.handleMqttMessage (/src/server/services/zigbee2mqtt/lib/handleMqttMessage.js:97:41)
    at MqttClient.<anonymous> (/src/server/services/zigbee2mqtt/lib/connect.js:60:12)
    at MqttClient.emit (node:events:519:28)
    at MqttClient._handlePublish (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:1277:12)
    at MqttClient._handlePacket (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:410:12)
    at work (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:321:12)
    at Writable.writable._write (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:335:5)
    at doWrite (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:409:139)
    at writeOrBuffer (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:398:5)
    at Writable.write (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:307:11)
    at TLSSocket.ondata (node:internal/streams/readable:1009:22)
    at TLSSocket.emit (node:events:519:28)
    at addChunk (node:internal/streams/readable:561:12)
    at readableAddChunkPushByteMode (node:internal/streams/readable:512:3)
    at TLSSocket.Readable.push (node:internal/streams/readable:392:5)
    at TLSWrap.onStreamRead (node:internal/stream_base_commons:189:23)
2026-02-23T19:05:07+0100 <error> handleMqttMessage.js:109 () Failed to convert value for device Prise baie informatique: Error: Zigbee2mqqt expose not found on device "Prise baie informatique" with property "state".
    at Zigbee2mqttManager.readValue (/src/server/services/zigbee2mqtt/lib/readValue.js:16:11)
    at /src/server/services/zigbee2mqtt/lib/handleMqttMessage.js:105:31
    at Array.forEach (<anonymous>)
    at Zigbee2mqttManager.handleMqttMessage (/src/server/services/zigbee2mqtt/lib/handleMqttMessage.js:97:41)
    at MqttClient.<anonymous> (/src/server/services/zigbee2mqtt/lib/connect.js:60:12)
    at MqttClient.emit (node:events:519:28)
    at MqttClient._handlePublish (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:1277:12)
    at MqttClient._handlePacket (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:410:12)
    at work (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:321:12)
    at Writable.writable._write (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:335:5)
    at doWrite (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:409:139)
    at writeOrBuffer (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:398:5)
    at Writable.write (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:307:11)
    at TLSSocket.ondata (node:internal/streams/readable:1009:22)
    at TLSSocket.emit (node:events:519:28)
    at addChunk (node:internal/streams/readable:561:12)
    at readableAddChunkPushByteMode (node:internal/streams/readable:512:3)
    at TLSSocket.Readable.push (node:internal/streams/readable:392:5)
    at TLSWrap.onStreamRead (node:internal/stream_base_commons:189:23)
2026-02-23T19:05:07+0100 <error> handleMqttMessage.js:109 () Failed to convert value for device Prise baie informatique: Error: Zigbee2mqqt expose not found on device "Prise baie informatique" with property "voltage".
    at Zigbee2mqttManager.readValue (/src/server/services/zigbee2mqtt/lib/readValue.js:16:11)
    at /src/server/services/zigbee2mqtt/lib/handleMqttMessage.js:105:31
    at Array.forEach (<anonymous>)
    at Zigbee2mqttManager.handleMqttMessage (/src/server/services/zigbee2mqtt/lib/handleMqttMessage.js:97:41)
    at MqttClient.<anonymous> (/src/server/services/zigbee2mqtt/lib/connect.js:60:12)
    at MqttClient.emit (node:events:519:28)
    at MqttClient._handlePublish (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:1277:12)
    at MqttClient._handlePacket (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:410:12)
    at work (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:321:12)
    at Writable.writable._write (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:335:5)
    at doWrite (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:409:139)
    at writeOrBuffer (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:398:5)
    at Writable.write (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:307:11)
    at TLSSocket.ondata (node:internal/streams/readable:1009:22)
    at TLSSocket.emit (node:events:519:28)
    at addChunk (node:internal/streams/readable:561:12)
    at readableAddChunkPushByteMode (node:internal/streams/readable:512:3)
    at TLSSocket.Readable.push (node:internal/streams/readable:392:5)
    at TLSWrap.onStreamRead (node:internal/stream_base_commons:189:23)
2026-02-23T19:05:09+0100 <error> handleMqttMessage.js:109 () Failed to convert value for device Capteur air salon: Error: Zigbee2mqqt expose not found on device "Capteur air salon" with property "humidity".
    at Zigbee2mqttManager.readValue (/src/server/services/zigbee2mqtt/lib/readValue.js:16:11)
    at /src/server/services/zigbee2mqtt/lib/handleMqttMessage.js:105:31
    at Array.forEach (<anonymous>)
    at Zigbee2mqttManager.handleMqttMessage (/src/server/services/zigbee2mqtt/lib/handleMqttMessage.js:97:41)
    at MqttClient.<anonymous> (/src/server/services/zigbee2mqtt/lib/connect.js:60:12)
    at MqttClient.emit (node:events:519:28)
    at MqttClient._handlePublish (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:1277:12)
    at MqttClient._handlePacket (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:410:12)
    at work (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:321:12)
    at Writable.writable._write (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:335:5)
    at doWrite (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:409:139)
    at writeOrBuffer (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:398:5)
    at Writable.write (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:307:11)
    at TLSSocket.ondata (node:internal/streams/readable:1009:22)
    at TLSSocket.emit (node:events:519:28)
    at addChunk (node:internal/streams/readable:561:12)
    at readableAddChunkPushByteMode (node:internal/streams/readable:512:3)
    at TLSSocket.Readable.push (node:internal/streams/readable:392:5)
    at TLSWrap.onStreamRead (node:internal/stream_base_commons:189:23)
2026-02-23T19:05:09+0100 <error> handleMqttMessage.js:109 () Failed to convert value for device Capteur air salon: Error: Zigbee2mqqt expose not found on device "Capteur air salon" with property "linkquality".
    at Zigbee2mqttManager.readValue (/src/server/services/zigbee2mqtt/lib/readValue.js:16:11)
    at /src/server/services/zigbee2mqtt/lib/handleMqttMessage.js:105:31
    at Array.forEach (<anonymous>)
    at Zigbee2mqttManager.handleMqttMessage (/src/server/services/zigbee2mqtt/lib/handleMqttMessage.js:97:41)
    at MqttClient.<anonymous> (/src/server/services/zigbee2mqtt/lib/connect.js:60:12)
    at MqttClient.emit (node:events:519:28)
    at MqttClient._handlePublish (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:1277:12)
    at MqttClient._handlePacket (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:410:12)
    at work (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:321:12)
    at Writable.writable._write (/src/server/services/zigbee2mqtt/node_modules/mqtt/lib/client.js:335:5)
    at doWrite (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:409:139)
    at writeOrBuffer (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:398:5)
    at Writable.write (/src/server/services/zigbee2mqtt/node_modules/readable-stream/lib/_stream_writable.js:307:11)
    at TLSSocket.ondata (node:internal/streams/readable:1009:22)
    at TLSSocket.emit (node:events:519:28)
    at addChunk (node:internal/streams/readable:561:12)
    at readableAddChunkPushByteMode (node:internal/streams/readable:512:3)
    at TLSSocket.Readable.push (node:internal/streams/readable:392:5)
    at TLSWrap.onStreamRead (node:internal/stream_base_commons:189:23)

```

Tout semble bien connecté :

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/a/d/ad1a0d5de1ca94032a14507fbea7f958f2145a8b.png)

Lorsque je commande mes appareils directement sur zigbee2mqtt cela fonctionne et les logs de zigbee2mqtt ont bien l’air de publier dans mosquitto :

```auto
[2026-02-17 10:47:44] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Prise baie informatique', payload '{"child_lock":"UNLOCK","countdown":0,"current":0.78,"device":{"applicationVersion":192,"dateCode":"","friendlyName":"Prise baie informatique","hardwareVersion":1,"ieeeAddr":"0xa4c138ab6aac9d17","manufacturerID":4417,"manufacturerName":"_TZ3000_2putqrmw","model":"A1Z","networkAddress":43679,"powerSource":"Mains (single phase)","stackVersion":0,"type":"Router","zclVersion":3},"energy":570.99,"indicator_mode":"off/on","last_seen":"2026-02-17T10:47:44+01:00","linkquality":174,"power":128,"power_outage_memory":"restore","state":"ON","voltage":231}'
[2026-02-17 10:47:48] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/health', payload '{"response_time":1771321668141,"os":{"load_average":[0,0,0],"memory_used_mb":486.23,"memory_percent":24.7113},"process":{"uptime_sec":838810,"memory_used_mb":137.43,"memory_percent":6.9845},"mqtt":{"connected":true,"queued":0,"published":634770,"received":4819},"devices":{"0xa4c138ab6aac9d17":{"messages":148990,"messages_per_sec":0.1776,"leave_count":0,"network_address_changes":0},"0x00158d000638ef50":{"messages":32871,"messages_per_sec":0.0392,"leave_count":0,"network_address_changes":0},"0xd44867fffe59ba37":{"messages":785,"messages_per_sec":0.0009,"leave_count":0,"network_address_changes":0},"0x00158d00045c12cc":{"messages":475,"messages_per_sec":0.0006,"leave_count":0,"network_address_changes":0},"0x0c2a6ffffe8e37df":{"messages":881,"messages_per_sec":0.0011,"leave_count":0,"network_address_changes":0},"0xa4c1380d71bb31e9":{"messages":28392,"messages_per_sec":0.0338,"leave_count":0,"network_address_changes":0},"0x00158d0001dda511":{"messages":3151,"messages_per_sec":0.0038,"leave_count":0,"network_address_changes":0},"0x00124b0024c5cb2e":{"messages":4441,"messages_per_sec":0.0053,"leave_count":0,"network_address_changes":0},"0xf84477fffef9d58f":{"messages":31032,"messages_per_sec":0.037,"leave_count":0,"network_address_changes":0},"0xa4c1383f0627cc38":{"messages":5304,"messages_per_sec":0.0063,"leave_count":0,"network_address_changes":0},"0x00158d0004659191":{"messages":4106,"messages_per_sec":0.0049,"leave_count":0,"network_address_changes":0},"0x00124b0024c2511f":{"messages":2138,"messages_per_sec":0.0025,"leave_count":0,"network_address_changes":0},"0x00124b0024c25088":{"messages":2971,"messages_per_sec":0.0035,"leave_count":0,"network_address_changes":0},"0x6cfd22fffe6129ee":{"messages":203,"messages_per_sec":0.0002,"leave_count":0,"network_address_changes":0},"0xa4c138cb550205b3":{"messages":13363,"messages_per_sec":0.0159,"leave_count":0,"network_address_changes":0},"0x94a081fffebb85f2":{"messages":398,"messages_per_sec":0.0005,"leave_count":0,"network_address_changes":0},"0x0c2a6ffffe25efb9":{"messages":1083,"messages_per_sec":0.0013,"leave_count":0,"network_address_changes":0},"0xb4e3f9fffe277145":{"messages":2096,"messages_per_sec":0.0025,"leave_count":0,"network_address_changes":0},"0xa4c1384c3d763b66":{"messages":3816,"messages_per_sec":0.0046,"leave_count":0,"network_address_changes":0},"0xb4e3f9fffe2a8585":{"messages":2098,"messages_per_sec":0.0025,"leave_count":0,"network_address_changes":0},"0x842712fffe416873":{"messages":2875,"messages_per_sec":0.0034,"leave_count":0,"network_address_changes":0},"0x0015bc00310097e5":{"messages":5404,"messages_per_sec":0.0064,"leave_count":0,"network_address_changes":0},"0xb43522fffec9c4c7":{"messages":1234,"messages_per_sec":0.0015,"leave_count":0,"network_address_changes":0},"0x881a14fffeef639c":{"messages":1316,"messages_per_sec":0.0016,"leave_count":0,"network_address_changes":0},"0x00158d000460b981":{"messages":3606,"messages_per_sec":0.0043,"leave_count":0,"network_address_changes":0},"0x842712fffe1a4991":{"messages":1524,"messages_per_sec":0.0018,"leave_count":0,"network_address_changes":0},"0xc4d8c8fffe951c8c":{"messages":358,"messages_per_sec":0.0004,"leave_count":0,"network_address_changes":0},"0x08ddebfffee2db59":{"messages":380,"messages_per_sec":0.0005,"leave_count":0,"network_address_changes":0},"0x0c2a6ffffe061429":{"messages":905,"messages_per_sec":0.0011,"leave_count":0,"network_address_changes":0},"0x00158d0004201e7f":{"messages":283,"messages_per_sec":0.0003,"leave_count":0,"network_address_changes":0},"0x08ddebfffe107373":{"messages":3748,"messages_per_sec":0.0045,"leave_count":0,"network_address_changes":0},"0x00158d0006329432":{"messages":455,"messages_per_sec":0.0005,"leave_count":0,"network_address_changes":0},"0x00124b0024fc1490":{"messages":323,"messages_per_sec":0.0004,"leave_count":0,"network_address_changes":0},"0x08ddebfffe80c391":{"messages":147,"messages_per_sec":0.0002,"leave_count":0,"network_address_changes":0},"0x08ddebfffe8138e9":{"messages":92,"messages_per_sec":0.0001,"leave_count":0,"network_address_changes":0}}}'
[2026-02-17 10:47:59] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Prise baie informatique', payload '{"child_lock":"UNLOCK","countdown":0,"current":0.89,"device":{"applicationVersion":192,"dateCode":"","friendlyName":"Prise baie informatique","hardwareVersion":1,"ieeeAddr":"0xa4c138ab6aac9d17","manufacturerID":4417,"manufacturerName":"_TZ3000_2putqrmw","model":"A1Z","networkAddress":43679,"powerSource":"Mains (single phase)","stackVersion":0,"type":"Router","zclVersion":3},"energy":570.99,"indicator_mode":"off/on","last_seen":"2026-02-17T10:47:59+01:00","linkquality":174,"power":128,"power_outage_memory":"restore","state":"ON","voltage":231}'

```

Une idée @pierre-gilles du problème ? 🙂

Merci

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [Février 23, 2026, 6:20 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/2 "2026-02-23T18:20:53Z")

</div>

La mise à jour ne touche à rien de lié à Zigbee2mqtt 😃

Chez moi, tout fonctionne parfaitement !

À mon avis c’est ta modification

---

<div class="post-metadata">

**Author:** ![prohand](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/prohand/32/15713_2.png) [@prohand](https://community.gladysassistant.com/u/prohand)\
**Post date:** [Février 23, 2026, 6:34 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/3 "2026-02-23T18:34:23Z")

</div>

C’est bizarre car zigbee2mqtt arrive bien a faire des choses dans mosquitto :  
J’arrive également à m’y connecter avec le client MQTT Explorer

 ![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/5/f/5fae1499d3963a5d9bd17e3bf5eb5076316657c9.png)

Pas d’erreurs dans les logs de mosquitto et n’y de zigbee2mqtt par contre du côté de Gladys j’en ai beaucoup  
Dans les logs Zigbee2mqtt n’est pas écrit correctement je ne sais pas si cela a une importance :

```auto
Error: Zigbee2mqqt

```

Dans les logs Gladys j’ai bien ceci :

![image](https://gladys-assistant-community.b-cdn.net/uploads/default/original/3X/9/3/93633e32557c3c863c99e16a10acf829dd5a240c.png)

Je suis en train de restaurer un backup à hier soir pour voir si ça refonctionne ou pas

---

<div class="post-metadata">

**Author:** ![G\_rom0304](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/g_rom0304/32/19997_2.png) [@G\_rom0304](https://community.gladysassistant.com/u/G_rom0304)\
**Post date:** [Février 23, 2026, 6:46 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/4 "2026-02-23T18:46:53Z")

</div>

Bonsoir,

Mes prises Zigbee ne remontent plus les consommations en temps réel. Si ça peut aider 🤣.

---

<div class="post-metadata">

**Author:** ![prohand](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/prohand/32/15713_2.png) [@prohand](https://community.gladysassistant.com/u/prohand)\
**Post date:** [Février 23, 2026, 6:47 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/5 "2026-02-23T18:47:57Z")

</div>

Même problème avec le backup d’hier donc la mise à jour de ce jour n’est pas en cause 🙂

Je vais chercher pourquoi cela ne fonctionne pas après avoir passé mosquitto sur docker

---

<div class="post-metadata">

**Author:** ![G\_rom0304](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/g_rom0304/32/19997_2.png) [@G\_rom0304](https://community.gladysassistant.com/u/G_rom0304)\
**Post date:** [Février 23, 2026, 6:48 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/6 "2026-02-23T18:48:38Z")

</div>

D’accord, j’ai l’impression que ça date de hier d’après midi 🤔

J’attends de tes news 😁

---

<div class="post-metadata">

**Author:** ![prohand](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/prohand/32/15713_2.png) [@prohand](https://community.gladysassistant.com/u/prohand)\
**Post date:** [Février 23, 2026, 6:58 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/7 "2026-02-23T18:58:01Z")

</div>

Mon problème date bien de cet après-midi et impact tout les appareils de zigbee2mqtt.  
Je pense que tu devrais ouvrir un nouveau topic pour ta problématique 🙂

---

<div class="post-metadata">

**Author:** ![prohand](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/prohand/32/15713_2.png) [@prohand](https://community.gladysassistant.com/u/prohand)\
**Post date:** [Février 23, 2026, 7:50 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/8 "2026-02-23T19:50:22Z")

</div>

J’ai pu résoudre mon problème. 😅  
Je suis repassé sur la version 2.0.21 de mosquitto via docker et j’ai reboot.  
Tout à refonctionné sans problème.  
J’ai remis en version latest et j’ai de nouveau redémarré.  
Tout fonctionne à nouveau.  
Les mystères de l’informatique 😅

Edit : Après plusieurs tests, le problème vient de la version 2.1.x (latest)  
J’ai forcé la version en 2.0.22 et tout est ok.  
Il faudra étudier les changements avec 2.1.x

---

<div class="post-metadata">

**Author:** ![G\_rom0304](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/g_rom0304/32/19997_2.png) [@G\_rom0304](https://community.gladysassistant.com/u/G_rom0304)\
**Post date:** [Février 23, 2026, 8:04 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/9 "2026-02-23T20:04:13Z")

</div>

Et comment tu fais ça en version simple 😅

---

<div class="post-metadata">

**Author:** ![prohand](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/prohand/32/15713_2.png) [@prohand](https://community.gladysassistant.com/u/prohand)\
**Post date:** [Février 23, 2026, 8:07 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/10 "2026-02-23T20:07:45Z")

</div>

Tu ne peux le modifier car j’utilise de mon côté un mqtt externe.  
Ah moins que tu es suivi mon tutoriel 😉  
La version de mosquitto utilisé par Gladys est fixé directement dans le code de Gladys pour plus de facilité

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [Février 23, 2026, 8:09 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/11 "2026-02-23T20:09:29Z")

</div>

@G_rom0304 Je pense il vaut mieux que tu créé un autre sujet car ton problème n’a pas de rapport je pense 🙂

Tu es sur un kit de démarrage Gladys, avec un Zigbee2mqtt installé automatiquement, c’est très différent de l’installation de @prohand !

---

<div class="post-metadata">

**Author:** ![G\_rom0304](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/g_rom0304/32/19997_2.png) [@G\_rom0304](https://community.gladysassistant.com/u/G_rom0304)\
**Post date:** [Février 23, 2026, 8:10 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/12 "2026-02-23T20:10:22Z")

</div>

Très bien je vais créer ça tout de suite

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [Février 23, 2026, 8:10 UTC](https://community.gladysassistant.com/t/zigbee2mqtt-non-fonctionnel/10048/13 "2026-02-23T20:10:42Z")

</div>