# Zwave - Help with v4

**URL:** <https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312>\
**Category:** Configuration\
**Created:** [April 16, 2020, 7:33pm UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312 "2020-04-16T19:33:00Z")\
**Posts on this page:** 15\
**Page:** 4

<div class="post-metadata">

**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\
**Post date:** [August 15, 2020, 6:42pm UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/72 "2020-08-15T18:42:53Z")

</div>

Cleaning up the topic…  
I’m restarting a fresh install of Gladys directly on my NAC (more practical than on Rpi for the moment), it’s been quite a few weeks (months) since I haven’t seen Gladys evolve.  
I see that my connected Neo coolcam socket is still half recognized: well added in Gladys it only has the switch function (on/off) but the consumption reading does not work.

Is there any development in this area? (I remember a transition to openzwave if I am not mistaken)

---

<div class="post-metadata">

**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\
**Post date:** [August 16, 2020, 9:54am UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/73 "2020-08-16T09:54:57Z")

</div>

It has always been the OpenZWave library used, the Gladys RC is expected to handle these «&nbsp;cases&nbsp;» of half-managed devices in Gladys

---

<div class="post-metadata">

**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\
**Post date:** [August 16, 2020, 10:31am UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/74 "2020-08-16T10:31:06Z")

</div>

Ok great! 👍 Thanks for the quick response

So I just have to be patient… Not my strong suit 😅

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [August 17, 2020, 7:05am UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/75 "2020-08-17T07:05:44Z")

</div>

> [@guim31](#):
>
> It’s been quite a few weeks (months) since I last saw Gladys evolve.

Yet I assure you that I am working part-time on Gladys, it’s progressing a lot 😅

> [@guim31](#):
>
> I see that my connected Neo Coolcam outlet is still only partially recognized: well added in Gladys, it only has the switch (on/off) function, but the consumption reading does not work.

By searching the forum, I think it’s a PR from @link39 that will solve your problem, it’s this one:

[https://github.com/GladysAssistant/Gladys/pull/759](https://github.com/GladysAssistant/Gladys/pull/759)

I’m waiting for his response to know when it can go to production!

---

<div class="post-metadata">

**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\
**Post date:** [August 17, 2020, 7:07am UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/76 "2020-08-17T07:07:44Z")

</div>

> [@pierre-gilles](#):
>
> However, I assure you that I work part-time on Gladys, it’s progressing a lot 😅

I think he meant that it’s been a long time since he looked at the evol 😁

---

<div class="post-metadata">

**Author:** ![guim31](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/guim31/32/4840_2.png) [@guim31](https://community.gladysassistant.com/u/guim31)\
**Post date:** [August 17, 2020, 2:53pm UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/77 "2020-08-17T14:53:33Z")

</div>

> [@pierre-gilles](#):
>
> Yet I assure you that I work part-time on Gladys it’s coming along nicely

Anyway, my apologies, I realize my sentence was poorly worded…!  
Actually, my Rpi with gladys has been in the closet for quite some time, so I regularly read the progress but I never tested it!  
I can see that your roadmap is very busy until the RC (and that you’re making good progress!), and I still regret not having the skills to move this project forward more concretely.

In short, all positive, it would never occur to me to come and criticize someone’s work here! 😉

---

<div class="post-metadata">

**Author:** ![gaetanb76](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaetanb76/32/5911_2.png) [@gaetanb76](https://community.gladysassistant.com/u/gaetanb76)\
**Post date:** [September 5, 2020, 9:29am UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/78 "2020-09-05T09:29:00Z")

</div>

Hello,  
I can only control it with the switch 🙂  
And it is not possible to set it to a specific value. It’s TOR.  
It would be great to have a linear dimmer to choose the opening/closing.  
We could then integrate this opening percentage into a scene such as «&nbsp;Lower\_Sun\_VR&nbsp;»

Last night I created a scene to close my VR at 9 p.m. They wanted to open. I hear the motor trying to turn for the time it receives power for normal VR operation.  
I need to choose «&nbsp;turn on sockets&nbsp;» for my VR to close.  
The wall switches work correctly.  
Perhaps it’s logical from a purely electrical point of view. I’ll have to get used to it.

Another thing: on the smartphone, in Gladys, the interface freezes when I want to edit a scene.  
I have to refresh the page, which takes me out of the scene and I have to click «&nbsp;edit&nbsp;» to be able to select the elements to control.

---

<div class="post-metadata">

**Author:** ![gaetanb76](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaetanb76/32/5911_2.png) [@gaetanb76](https://community.gladysassistant.com/u/gaetanb76)\
**Post date:** [September 5, 2020, 9:31am UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/79 "2020-09-05T09:31:28Z")

</div>

Indeed, the same for me with my roller shutters and heating.  
You have to try several times for the interface switch to stay in the desired position.

---

<div class="post-metadata">

**Author:** ![gaetanb76](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/gaetanb76/32/5911_2.png) [@gaetanb76](https://community.gladysassistant.com/u/gaetanb76)\
**Post date:** [September 6, 2020, 8:41am UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/80 "2020-09-06T08:41:40Z")

</div>

Hello,  
I can’t integrate this remote control into Gladys v4.  
noDon Octan Remote  
[https://nodon.fr/nodon/telecommande-octan-z-wave/](https://nodon.fr/nodon/telecommande-octan-z-wave/)  
I followed the procedure indicated in the manual, but the LED on the remote, which should light up green, does not light up, indicating that it is not pairing.  
Any ideas?

---

<div class="post-metadata">

**Author:** ![Damien\_L](https://gladys-assistant-community.b-cdn.net/letter_avatar_proxy/v4/letter/d/edb3f5/32.png) [@Damien\_L](https://community.gladysassistant.com/u/Damien_L)\
**Post date:** [September 13, 2020, 9:53pm UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/81 "2020-09-13T21:53:51Z")

</div>

@VonOx could this explain my stick detection issues on a Gladys installation on a Freebox Delta please?  
(I have a post on the subject)  
I think I have a USB hub - I’ll try to plug it in - but in the meantime, I can’t get Gladys to detect it…

---

<div class="post-metadata">

**Author:** ![VonOx](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/vonox/32/10128_2.png) [@VonOx](https://community.gladysassistant.com/u/VonOx)\
**Post date:** [September 14, 2020, 12:37pm UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/82 "2020-09-14T12:37:27Z")

</div>

This only concerns the raspberry

---

<div class="post-metadata">

**Author:** ![Albenss](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/albenss/32/3916_2.png) [@Albenss](https://community.gladysassistant.com/u/Albenss)\
**Post date:** [November 14, 2020, 8:55am UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/83 "2020-11-14T08:55:29Z")

</div>

Hello,  
I am using Gladys V4 with a [Z-Wave+ USB Controller - Everspring](https://www.amazon.fr/Everspring-Contr%C3%B4leur-USB-Z-Wave/dp/B01LQZ9BLG/ref=sr_1_8?dchild=1%5Cu0026keywords=EVERSPRING%5Cu0026qid=1605343804%5Cu0026sr=8-8) and currently connected only with a [Fibaro FGMS-001](https://www.amazon.fr/Fibaro-FGMS-001-Capteur-de-Mouvement/dp/B01CPR7VX4?ref_=ast_sto_dp).  
I have a problem with data reporting on the Dashboard, my Fibaro is well connected to my Gladys instance:

 ![zwave](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/4/41e89399ee061de45569980d69148131ac208054.png)

However, the information is not being reported on the dashboard, it only happens the first time I connect the Fibaro to my instance:

 ![dashboard](https://gladys-assistant-community.b-cdn.net/uploads/default/original/2X/a/a3878b9aa036c4ece90c12e2eed660897bcd4bc3.png)

Any idea where the problem might be coming from?

---

<div class="post-metadata">

**Author:** ![Fabichou](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/fabichou/32/4327_2.png) [@Fabichou](https://community.gladysassistant.com/u/Fabichou)\
**Post date:** [November 14, 2020, 11:21am UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/84 "2020-11-14T11:21:02Z")

</div>

Hello,  
I hope you’ll have more luck than me…  
[https://community.gladysassistant.com/t/probleme-zwave-avec-certains-capteurs/5665](https://community.gladysassistant.com/t/probleme-zwave-avec-certains-capteurs/5665)

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [October 10, 2021, 7:53am UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/85 "2021-10-10T07:53:30Z")

</div>

For those who might come across this post by chance and are looking for updates on the new ZWaveJS service, we discuss it here:

[https://community.gladysassistant.com/t/v4-integration-z-wave/6057/33?u=pierre-gilles](https://community.gladysassistant.com/t/v4-integration-z-wave/6057/33?u=pierre-gilles)

---

<div class="post-metadata">

**Author:** ![pierre-gilles](https://gladys-assistant-community.b-cdn.net/user_avatar/community.gladysassistant.com/pierre-gilles/32/5886_2.png) [@pierre-gilles](https://community.gladysassistant.com/u/pierre-gilles)\
**Post date:** [October 10, 2021, 7:53am UTC](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312/86 "2021-10-10T07:53:38Z")

</div>



[Previous page](https://community.gladysassistant.com/t/zwave-aide-pour-la-v4/5312.md?page=3)
