Request for external integration for DREAME robot vacuum/mop

:tada: Dreame goes 1.0.0 and enters the store!

No more need to go through « Install from GitHub »: it appears in the integrations catalog, like the others. If you already installed it, the update will be offered to you normally, your devices and dashboards won’t change.

A huge thank you to @Chris75 :folded_hands: Eight versions, dozens of screenshots and diagnostics, and an integration validated end-to-end on a real robot even though I don’t have one. Without you, it wouldn’t exist!

And I’ve seen your last three requests, I haven’t forgotten them:

  • the Last Cleaning line right after the battery, in the « battery and part wear » list;
  • the order of part selection respected, like for Mammotion zones;
  • the robot’s path drawn on the map, like on Roborock :smiling_face_with_sunglasses:

I’m keeping them warm for next time :wink:

Do you have a Dreame? Install it and tell me how it goes for you: each model has its little peculiarities!

@Chris75 your three requests are in the 1.1.0 :tada:

  • Last cleaning: the Robot widget displays the surface and duration of the last cleaning just below the battery, before the wear of the parts.
  • Order of the rooms: like for the zones of Mammotion, the rooms are cleaned in the order in which you turn on their « Selection » switches. To change the order, you turn everything off and turn it back on in the desired order. The order is kept even if Gladys restarts.
  • Robot path: the widget map draws the path, in white where it has vacuumed and in blue where it has only mopped, with the robot on top :smiling_face_with_sunglasses:

You just need to install the update, nothing to do in Discovery. It will be offered to you as soon as the store has seen it, during the day.

As usual, I don’t have a robot to check, so I’m counting on you for three small things:

  1. Turn on three rooms in an unusual order, start Clean Selection and check the order actually followed. Small honest reservation: on some models, including perhaps yours, the robot follows the order set in the Dreame app instead of ours. If that’s the case, let me know, I’ll write it in black and white in the documentation.
  2. Check if the path line appears during and after cleaning, if it is readable in light mode as well as in dark mode, and if the robot stays well above. If nothing is displayed, paste me the line « Map image 
 path 
 » from Diagnostic.
  3. Check that the Last cleaning line is well below the battery.

Thanks again for all this feedback :folded_hands:

It’s especially a VERY big thank you to you @guim31! :clap: :clap:
This integration works perfectly (including the last 3 points). It’s still incredible to be able to develop such an advanced integration without having the hardware, but just with a tester who has the gear.
It’s really very promising for the future of Gladys @pierre-gilles

Thanks for your work!!

@guim31 I don’t know if you saw the feedback on your PR: Dashboard: one row and a panel per robot vacuum in the devices widget by guim31 · Pull Request #3160 · GladysAssistant/Gladys · GitHub

@pierre-gilles thanks for the reminder, I hadn’t seen it go by :sweat_smile:

I’ll take care of it: the robot on pause that displays “Stop” instead of “Start” (well spotted, that was canceling the cleaning), the row that’s too wide on mobile, and the branch that needs to be updated with master. I’ll get back to the PR as soon as it’s pushed.

Hi, I’ll take this opportunity to ask @guim31 if this Dreame integration could recognize my Dreame A1 Pro lawn mower robot?

Hi @Philippe_B! Not yet: the integration only recognizes vacuum robots. Your A1 Pro lawnmower goes through the same Dreamehome cloud, but it speaks a different « language » (different commands, different states), so it would need to be added.

I’ll note the request and see if it’s feasible :slightly_smiling_face: As I don’t have a lawnmower, I’d need a tester: would you be up for it?

of course as soon as the rain stops! :cloud_with_rain:

Hi @Chris75!

The Dreame vacuum cleaner is in the catalog. @guim31 has published the integration in 1.0.0.

You control the robot (cleaning modes, rooms, status) from Gladys, and you use it in scenes. Integrations → « Dreame ».

The Dreame A1 Pro lawnmower, requested at the end of the thread by @Philippe_B, is not in this integration: it’s not the same language. A dedicated topic will be the right place to follow it. This one was about the vacuum cleaner.

I’m moving this topic to « Delivered requests ». If there’s still a case that doesn’t fit, open a new topic: it will be easier to follow.