Analysis: Prioritization of developments: Core / integrations?

News
21

I tested with Node-RED but without success.
And it still went through another system!

22

Yes, that’s for sure, but for me, while waiting for the integration I use my older (and more recent) devices on 433 MHz. Dashticz, isn’t that a kind of Node-RED?

23

Dashticz is an alternative « Dashboard » for Domoticz.
Dashticz is capable of displaying (almost) all information from Domoticz.
In addition to that, it is possible to display information from all kinds of other sources.

It « simply » uses the Domoticz database to display the data!

24

ah, okay?
thanks :slightly_smiling_face:

25

Hello,
I didn’t switch to Gladys because Somfy protocols are not supported.
Regards
Christophe

26

Hi, I currently control my two roller shutters (VR) using the Somfy protocol with an ESP8266 module and MQTT via Node-RED. It works pretty well.

1 Like
27

Hello, I’m replying to this comment because I also have a Homey for a few years and I have a very annoying limitation with Zigbee. I installed Home Assistant but I don’t find it easy (especially on a Synology NAS with DSM7 :frowning: ). I’m looking into increasing this limitation using zigbee2mqtt with Gladys on a Raspberry that already has an MQTT broker installed on my NAS. It’s under consideration… but I think Gladys can be complementary to the Homey — I’m thinking in particular about using Bluetooth devices via MQTT as well in the future if possible, since the Homey is also limited on that protocol.

1 Like
28

Good evening,
My shutters are equipped with the RTS and IO protocols.
My Velux shutters are IO.
Can you control them with Gladys?
Kind regards,

29

[quote="Alexia_Skr

30

Hello,

  • Currently with Domoticz,
  • as already mentioned I am testing Gladys because
2 Likes
31

Hello @Phil,

What do you need to stop using Domoticz and be 100% Gladys?

32

I’ve been on Domoticz for 8 years (mainly RFX433) and I’m slowly migrating to Gladys with Zigbee 3.0 devices.
The drawback: 2 Raspberry Pis running!
However, I integrated some devices into Gladys by using the Domoticz API.
I made a note to keep track; you’ll find it at the following link to my Yunohost server, if it helps.
https://moncet.hd.free.fr/droppy/$/XY8RE

1 Like
33

I’m in the same situation as kazuke.
Domoticz + RFX433 have been working for several years.
I’m not migrating to Gladys yet but I’m mainly testing Zigbee.
I tried kazuke’s link but « This site is inaccessible » !
:wink:

34

Oops, sorry. There was a power cut to my modem

35

Great @kazuke! Feel free to post this little tutorial on the forum, we have a category Tutoriels - Gladys Assistant community that’s made for that, so it’s indexed and can help people who might be searching the forum :slight_smile:

36

Thanks PG. You were the one who guided me in response to one of my previous posts. :wink:

37

Hello !

  • For my part, I wasn’t able to set up a working dev environment by following the documentation (tested on my machine running Windows 10, on RPI3 and RPI4).
    I admit a helping hand would be welcome (video? additional documentation: where to find the logs in case of a problem, how to verify that the dev environment is working correctly, etc…).

  • +1 for Sonos :slight_smile:

1 Like
38

@glasserre @pierre-gilles
same situation as glasserre regarding the installation of the development environment that I already mentioned (I’m on Windows 11 with WSL2 and Ubuntu 20.04 in WSL)
I’m also only asking for that: to participate in the dev work…

39

@glasserre @Einstein8854,

A bit more info about your issues (logs, errors encountered, etc.) would be a big help in assisting you :slight_smile:

40

Thanks Spenceur, I should dive back into it and find the forum threads (that was a few months ago). I’ll ping you on the topic in a few days :slight_smile:

1 Like