Personally it runs without any problem on Win 10 and WSL2 so as @spenceur says without telling us where you’re stuck we’re going to have trouble helping you.
It’s like going to the doctor and saying « it hurts » 
1 Like
I’ve had lots of issues resolved with WSL2 and Ubuntu 22.04 on Windows 11 if that helps (but for something other than Gladys).
Hello @pierre-gilles
-
sorry for the delay in replying
-
Today the Domoticz configuration in prod :
- Netatmo Security : indoor cameras
→ Ok on Gladys - Netatmo Security : the so-called intelligent detectors
→ not Ok on Gladys - Netatmo Weather (indoor base + outdoor module + rain gauge)
→ not yet Ok on Gladys (I’m happy to test) - temperatures sent via a POST from a Raspberry Pi (far from my home)
→ this is probably my fault because it should be possible via Gladys. no? - commands and display W and kWh of Fibaro plugs in Z-Wave :
→ this is probably my fault because it should be possible via Gladys. no? - Linky (currently with GitHub - guillaumezin/DomoticzLinky: Linky plugin for Domoticz) has worked very well for a long time.
- what bothers me in some posts is having to add extra HW connected to the meter for use with Gladys,
- the solution proposed by @bertrandda is interesting and seems similar to the existing one on Domoticz
- Gazpar (currently with GitHub - Scrat95220/DomoticzGazpar: Import data from GDRF to Domoticz)
same remark as for Linky - water recovery tank measurement (use of ultrasonic with the US-100 sensor) … being prepared for production rollout, the prototype works
measurements sent in POST mode from a remote Raspberry Pi to Domoticz
Normally I haven’t forgotten anything.
Best regards
Phil
1 Like
I second the other messages, don’t hesitate to create specific threads with the errors encountered, it’s hard to help you if we don’t know the error 
Thanks for your very detailed feedback @Phil!
It’s possible with Gladys Plus!