Hi everyone! 
« Is the machine finished? » The question we ask ten times a day at home 
If your appliance is a connected Miele (Miele@home), Gladys can now answer it. Miele uses the official Miele API, and does not require Gladys Plus.
What it does
- One Miele appliance at a time (washing machine, dryer, dishwasher, oven, hood, hob, refrigerator, freezer, coffee maker, robot) with:
- the status, the program and the current phase, the remaining time and the expected end time;
- the door open or closed;
- the temperatures (oven, refrigerator, freezer, cooking probe);
- the water and energy consumed by the program, when the appliance provides them.
- Commands that are not dangerous: start/stop of the washing machine, dryer, dishwasher, hood and coffee maker, lights, fridge and freezer settings, SuperFrost/SuperCool.
- Two triggers: « program finished » (with the kWh and liters consumed) and « appliance failure ».
- A scene action: start, pause, stop a program (start only for laundry and dishes, with remote start enabled on the appliance).
- A « Miele Appliances » widget: what’s running, and the remaining time.
- Changes arrive in real-time via the Miele event stream.
- In French, English, German and Spanish.
Voluntarily, nothing that heats up turns on remotely: oven, hobs, microwave and heated drawers only have the light that can be controlled. Two locks in the code, tested separately.
The cool part
Washing machine finished → « The machine is finished » on the phone, or on the living room speaker
Dishwasher finished → turn the kitchen light back on
Freezer door open for more than 2 minutes → alert
Installation
Gladys 5.1 minimum.
It will arrive in the store at the next indexer run. In the meantime: Integrations → Install from GitHub, with GitHub - guim31/gladys-miele: Miele appliances for Gladys Assistant through the official Miele API: status, program, time left, remote start · GitHub
- Request your developer credentials from Miele, free of charge, with their form: you receive a Client ID and a Client Secret by email.
- Paste them into the integration configuration, save, then click on Connect and log in with your Miele account.
- Discovery tab: add your appliances.
Honest small reservations
- Developed without Miele appliance or account: everything was tested on real responses from the Miele API (taken from Home Assistant tests). The actual connection to Miele is the first thing to validate: your feedback is welcome
- Program names come from Miele, which only provides them in English or German.
Like the previous ones, developed with Claude Code. Independent project, not affiliated with Miele.