I realize that I had forgotten the tag and the post of a message here, even though I have been using it for several weeks!
[Integration] Lubluelu SL68 Vacuum / Tuya Robots: v0.3.0, Widgets, Scenes, and Zone Cleaning
Version 0.3.0 of the gladys-lubluelu-vaccum integration has been released. It controls locally the Lubluelu SL68 and other Tuya / Smart Life vacuum robots. It takes advantage of the new features of Gladys 5.1: dashboard widgets, scene triggers, and actions.
This version requires Gladys 5.1 or higher. On an older version, you will remain on 0.2.6.
What’s New
Real Robot Status
- Cleaning, paused, returning to base, charging, on base, stopped, or in error, displayed with Gladys’ native badge.
- Usable directly in a scene (« when the vacuum has returned to its base »).
- New features: cleaning area and duration, mop wear, reset button for each wear part, « do not disturb » mode.
- Statuses are also reported when the robot is only reachable via the Tuya cloud.
- Names in French or English, as chosen in the configuration.
4 Dashboard Widgets
| Widget | Content |
|---|---|
| Robot Vacuum | Battery, status, program, area, and duration of current cleaning, fault. Start / Pause / Resume buttons (depending on status), Return to Base, Locate, Stop. |
| Quick Cleaning | Up to 4 buttons in one gesture: a program (smart, edges, targeted, mop) or a zone. The current program is checked. Practical on a wall-mounted tablet. |
| Vacuum Remote Control | Manual control: forward, left, right, stop. |
| Vacuum Maintenance | Wear of each part in gauges, the most worn first, with reset of worn parts. |
Settings (suction, water flow…) remain in the « Devices » box of Gladys, to avoid duplication.
Scenes
- Triggers:
- cleaning finished: provides the area, duration, and battery, for example to send « Cleaning finished: 42 m² in 58 min »;
- error, with the fault description;
- worn part, below 10 %.
- Actions:
- start cleaning: program, suction, and water set in a single card;
- clean a zone.
Cleaning by Room or by Zone, as in the Smart Life app
- Start the cleaning of the room or zone once from the robot’s app.
- In the integration configuration, start the action « Remember the Last Zone » and give it a name (« Kitchen »). Gladys will then be able to relaunch it at will.
- You can also enter the rooms by number, for example
Kitchen=2, Living Room=0+1.
Each zone becomes a button on the device, in the « Quick Cleaning » widget, and in the scene action.
Update from 0.2.x
After the update, go to Discovery and click on « Update » on the vacuum to retrieve the new features. Do the same after having remembered a zone, to see its button appear.
