Hello,
Indeed, there was a problem during pairing. You can try removing the device to attempt a reconnection.
I succeeded (without having to delete / re-pair)!
See: Zigbee2mqtt : ampoule Xiaomi Aqara smart LED bulb (light) - #2 par lmilcent
For my part, everything works perfectly.
Using 2 outlets and a bulb from the IKEA TRĂ
DFRI range. 
Small note nevertheless: normally on my bulb model it is possible to adjust the light intensity as well as the switch on and switch off time. However, with the current possibilities of Gladys and the zigbee2mqtt module, I am not able to use these features.
No, the SD card installation is brand new.
If you are referring to gladys-z2m-mqtt, yes it is running and the logs are good
pi@raspberrypi:~ $ docker logs gladys-z2m-mqtt
1617480071: mosquitto version 2.0.10 starting
1617480071: Config loaded from /mosquitto/config/mosquitto.conf.
1617480071: Opening ipv4 listen socket on port 1884.
1617480071: Opening ipv6 listen socket on port 1884.
1617480071: mosquitto version 2.0.10 running
1617480072: New connection from 127.0.0.1:38044 on port 1884.
1617480072: New client connected from 127.0.0.1:38044 as mqttjs_c4b4a10f (p2, c1, k60, u'z2m').
1617480073: New connection from 127.0.0.1:38046 on port 1884.
1617480073: New client connected from 127.0.0.1:38046 as gladys-main-instance-586645 (p2, c1, k60, u'gladys').
1617525873: mosquitto version 2.0.10 terminating
1617525918: mosquitto version 2.0.10 starting
1617525918: Config loaded from /mosquitto/config/mosquitto.conf.
1617525918: Opening ipv4 listen socket on port 1884.
1617525918: Opening ipv6 listen socket on port 1884.
1617525918: mosquitto version 2.0.10 running
Nothing changed on my side.
@cicoub13 well done on the integration!
I just have an issue, my IKEA bulbs seem to be recognized as outlets in the scenes. Is this normal?
Itâs the same for me with my Aqara bulbs. I think weâll need to refine the specific integration of certain devices.
Hello. Can you give me the exact model from this list?
Hello. Same question Can you give me the exact model from this list?
Hello. Can you try disabling/enabling the service on the Integrations / Zigbee2Mqtt / Configuration page?
Hello, Iâve tried everything, I even reformatted my card to start over, Gladys kept restarting in a loop telling me to check the npm log file, but every time, Gladys created a new one, log file, so it was impossible to see the errors.
I just started a new installation, it seems to be going well this time, the Zigbee containers are installing, it seems.
Edit: everything is green, cool⊠Iâll check the rest later, when the kids take a nap.
Top
Yes thatâs normal, the ideal-image plugin from Docusaurus that we use does not generate all image sizes in dev mode. However, in prod mode it is generated
Thatâs normal! There is no sorting on the list as it is.
Hello @Jean34! I just saw your message, indeed. I hadnât pressed the button on the Gladys Plus front end to deploy 4.2.1, itâs now fixed
Given that Gladys Plus is a progressive web app, the content is cached locally so you should normally see the integration after one or two refreshes of the app
Sorry for the inconvenience!
No worries @pierre-gilles, I was just passing on the infoâŠ
@cicoub13 and @Reno, youâve really done a great job, everything is set up and configured super well, itâs impressive!
By the way, I didnât know that the Aqara door sensors also give the temperature.
Iâm like a kid, Iâll see this afternoon if itâs possible to make my little Alexa interact by voice if a door sensor opens⊠But thatâs another discussion
Again, bravo to the Zigbee service 
In theory, Aquara modules are compatible with Alexa 
so it should work!
Have fun
Thatâs the one:
Itâs good on my side, everything is there but I canât find my opening sensor.
next release, I added the Sonoff SNZB-*
All?
Top car I have sznb-03 too.
I have this one
LED1623G12
