Zigbee2mqtt: Unterstützung für SMLIGHT-Schlüssel über Netzwerk

prohand · 23. Februar 2026 um 08:58

Hallo,

Nach meinem Tutorial hier:

https://community.gladysassistant.com/t/connexion-cle-smlight-a-zigbee2mqtt-sur-gladys-full-ssl-tls-mqtt-et-z2m-externe

Eröffne ich diesen Feature-Request bezüglich der Unterstützung von SMLIGHT-Schlüsseln über das Netzwerk auf dem zigbee2mqtt von Gladys

Danke

pierre-gilles · 17. August 2026 um 08:31

Hallo @prohand,

Claude hat diese Entwicklung in diesem PR gemacht:

github.com/GladysAssistant/Gladys

Zigbee2mqtt: support network Zigbee coordinators (SMLIGHT SLZB-06/07…) (#2901)

master ← claude/z2m-network-adapter

ouvert 05:36PM - 15 Aug 26 UTC

Pierre-Gilles

+1120 -124

Implements feature request: https://community.gladysassistant.com/t/zigbee2mqtt-…prise-en-charge-des-cles-smlight-via-reseau/10045 This PR was opened by an automated Claude Code run. It needs human review and real-hardware testing: no network Zigbee coordinator (SMLIGHT SLZB-06/SLZB-07 or similar) was available in the environment, so the Docker/Zigbee2mqtt side was only validated through unit tests, not against a real gateway. ### Description Until now the Zigbee2mqtt integration only supported a Zigbee coordinator plugged in over USB: the setup page listed USB serial ports and the generated Z2M container always got the USB device passed through with `HostConfig.Devices`. Network coordinators (SMLIGHT SLZB-06/SLZB-07, ZigStar, TubesZB…) are reached over TCP instead — `serial.port: tcp://<host>:<port>` plus an explicit `serial.adapter` in Zigbee2mqtt's `configuration.yaml` — which was impossible to configure from Gladys. The author of the request had to run MQTT and Zigbee2mqtt manually outside Gladys ([his tutorial](https://community.gladysassistant.com/t/connexion-cle-smlight-a-zigbee2mqtt-sur-gladys-full-ssl-tls-mqtt-et-z2m-externe/10041)). The "Installation from Gladys" setup mode now asks how the Zigbee coordinator is connected: - **USB dongle** — unchanged, still the default (existing installations keep working exactly as before, the stored variable is simply absent); - **Network coordinator** — the user enters `tcp://<host>:<port>` (the `tcp://` prefix is optional) and picks the Zigbee2mqtt adapter type (`ember`, `zstack`, `deconz`, `ezsp`, read from the existing `/api/v1/service/zigbee2mqtt/adapter` route). Server side: - 3 new service variables following the existing `Z2M_*` pattern: `Z2M_ADAPTER_MODE` (`usb` / `network`), `Z2M_NETWORK_ADAPTER_URL`, `Z2M_NETWORK_ADAPTER_TYPE`. They are part of `SETUP_VARIABLES`, saved/loaded like the others and destroyed by the reset route. - New `services/zigbee2mqtt/utils/validateSetup.js`: validates the adapter mode and the adapter type against the known Z2M adapter keys, validates and normalizes the URL (host shape, `tcp://` scheme, port between 1 and 65535) and throws `BadParameters` (HTTP 400) otherwise, like the neighbouring routes. - `configureContainer` writes `serial.port` / `serial.adapter` for a network coordinator, and restores the USB device path when switching back. A USB configuration that is already in place is left untouched. - `installZ2mContainer` creates the container without any device passthrough in network mode, and removes/recreates the container when switching between USB and network so the device binding stays in sync. - `init` treats a configured network coordinator like a connected dongle to start the MQTT + Z2M containers; a new `networkAdapterConfigured` flag is exposed in the service status. Front side: USB/network radio choice, the two new fields, updated summary and setup requirements, i18n in **en**, **fr** and **de**. Notes: - The MQTT broker and Zigbee2mqtt containers are still managed by Gladys in this mode — only the coordinator is remote. - The Zigbee2mqtt service has no README documenting the setup, so no documentation file was updated. ## Forum Forum: https://community.gladysassistant.com/t/zigbee2mqtt-prise-en-charge-des-cles-smlight-via-reseau/10045 ### Checklist - [x] Tests pass: `cd server && npm run coverage` (Codecov requires 100% coverage on changed lines) and Cypress (`npm run cypress:run`) if the UI changed - The Zigbee2mqtt suites were run with coverage: 330 passing, 100% statements/branches on every file changed by this PR (the only uncovered lines in `configureContainer.js` are the pre-existing `portfinder` fallback). The full server suite was run too; the only failures are pre-existing environment ones in this sandbox (`sqlite3` binary missing for the backup/restore tests, outbound calls for the gateway/AI tests) and are unrelated to this change. - **Cypress was NOT run**: the Cypress binary is not installed in this environment. The existing Zigbee2mqtt setup specs and fixtures were updated for the new request payload and status field, but they have not been executed — please let CI run them. - [x] Linter and prettier pass on both front and server (`npm run eslint`, `npm run prettier`) — plus `npm run compare-translations` and `npm run build` on the front. - [x] No undocumented breaking change --- _Generated by [Claude Code](https://claude.ai/code/session_013yxguVaLdJ8ZKmw5x3HePT)_ ## Summary by CodeRabbit - **New Features** - Zigbee2MQTT setup now supports network-connected coordinators alongside USB dongles. - Configure connection mode, network address, and adapter type. - Setup summaries, requirements, and status now reflect the selected coordinator. - **Bug Fixes** - Improved network address validation, normalization, and port checks. - Switching between USB and network coordinators now updates container configuration correctly. - **Localization** - Updated English, German, and French translations for network coordinator setup.

Ich bin für Tests zu haben

Es gibt einen amd64-Build in diesem Bild:

ghcr.io/gladysassistant/gladys-preview:claude-z2m-network-adapter

prohand · 17. August 2026 um 08:58

Danke

Ich teste das heute Abend und gebe dir Feedback

prohand · 17. August 2026 um 15:52

Gute Nachricht, das bricht nichts an der bestehenden Installation

Also habe ich in meiner Dev-Installation zigbee2mqtt komplett zurückgesetzt und beim Start von zigbee2mqtt bekomme ich dies:

[2026-08-17 15:47:34] error: zh:zstack:znp: Socket error Error: connect ECONNREFUSED 192.168.xx.xx:7638
[2026-08-17 15:47:34] error: z2m: Error while starting zigbee-herdsman
[2026-08-17 15:47:34] error: z2m: Failed to start zigbee-herdsman
[2026-08-17 15:47:34] error: z2m: Check Zigbee2MQTT fails to start/crashes runtime | Zigbee2MQTT for possible solutions
[2026-08-17 15:47:34] error: z2m: Exiting…
[2026-08-17 15:47:34] error: z2m: Error: Error while opening socket
at Socket. (/app/node_modules/.pnpm/zigbee-herdsman@10.4.0/node_modules/zigbee-herdsman/src/adapter/z-stack/znp/znp.ts:160:24)
at Socket.emit (node:events:520:35)
at emitErrorNT (node:internal/streams/destroy:170:8)
at emitErrorCloseNT (node:internal/streams/destroy:129:3)
at processTicksAndRejections (node:internal/process/task_queues:90:21)
[2026-08-17 15:47:34] info: zh:zstack:znp: Port closed

/app/node_modules/.pnpm/readable-stream@3.6.2/node_modules/readable-stream/lib/_stream_writable.js:264
var er = new ERR_STREAM_WRITE_AFTER_END();
^
Error: write after end
at writeAfterEnd (/app/node_modules/.pnpm/readable-stream@3.6.2/node_modules/readable-stream/lib/_stream_writable.js:264:12)
at File.Writable.write (/app/node_modules/.pnpm/readable-stream@3.6.2/node_modules/readable-stream/lib/_stream_writable.js:300:21)
at DerivedLogger.ondata (/app/node_modules/.pnpm/readable-stream@3.6.2/node_modules/readable-stream/lib/_stream_readable.js:629:20)
at DerivedLogger.emit (node:events:520:35)
at addChunk (/app/node_modules/.pnpm/readable-stream@3.6.2/node_modules/readable-stream/lib/_stream_readable.js:279:12)
at readableAddChunk (/app/node_modules/.pnpm/readable-stream@3.6.2/node_modules/readable-stream/lib/_stream_readable.js:262:11)
at DerivedLogger.Readable.push (/app/node_modules/.pnpm/readable-stream@3.6.2/node_modules/readable-stream/lib/_stream_readable.js:228:10)
at DerivedLogger.Transform.push (/app/node_modules/.pnpm/readable-stream@3.6.2/node_modules/readable-stream/lib/_stream_transform.js:132:32)
at DerivedLogger._transform (/app/node_modules/.pnpm/winston@3.19.0/node_modules/winston/lib/winston/logger.js:337:12)
at DerivedLogger.Transform._read (/app/node_modules/.pnpm/readable-stream@3.6.2/node_modules/readable-stream/lib/_stream_transform.js:166:10)

Der Fehler stammt sehr wahrscheinlich von meiner Produktion, die bereits mit dem Netzwerkcontroller-Socket SLZB verbunden ist
Da es ein Risiko gibt, dass meine Produktion beschädigt wird, kann ich nicht weiter mit den Tests auf meiner Seite fortfahren

Bearbeitung: Ich schaue gerade, aber es gibt ein zweites Radio auf dem SLZB-MR01, also versuche ich, es so zu konfigurieren, dass es mit Zigbee funktioniert

prohand · 17. August 2026 um 16:05

@pierre-gilles

Ich bestätige, dass alles in Ordnung ist

pierre-gilles · 17. August 2026 um 17:06

Unglaublich, danke für die Tests!!

mutmut · 17. August 2026 um 19:06

Und wenn ich das richtig verstehe, kann man dann den SMLIGHT in Gladys über ein internes Z2M auswählen?
Derzeit ist meine SMLIGHT-Konfiguration mit meinem externen Z2M verknüpft.

Es wäre super, einen direkten Link zu haben, um sich damit zu verbinden, wenn man Firmware-Updates durchführen muss (wie den Link zu Z2M).
Wenn ich noch weiter gehe, eine Benachrichtigung, wenn es ein neues Firmware-Update gibt (wie bei HA)

prohand · 17. August 2026 um 19:10

Ja, genau das ist es

Thema		Antworten	Aufrufe
Pouvoir utiliser un Zigbee2mqtt externe dans Gladys Demandes livrées zigbee2mqtt , feature-integration	66	930	6. Mai 2024
Zigbee2mqtt 2.0 : Approche à prendre? Développement	12	305	22. Mai 2025
Zigbee2mqtt - services démarrés mais croix rouge pour le lien Configuration	59	2052	13. Mai 2023
Gladys Assistant 4.2 est disponible avec la compatibilité Zigbee2mqtt ! 🚀 Actualités	146	6146	17. Mai 2021
[Z2M] Tests en zigbee2mqtt 1.42.0 > 2.1.3 >..> 2.4.0 >..> 2.6.1>...>2.7.2 Développement zigbee2mqtt	33	1354	8. Dezember 2025

Zigbee2mqtt: Unterstützung für SMLIGHT-Schlüssel über Netzwerk

Verwandte Themen