Zigbee plus thermometer with detector

Configuration
1

Hello,

I am having an issue with a Xiaomi ZigBee thermometer Aqara WSDCGQ11LM control via MQTT | Zigbee2MQTT

Until the day before yesterday, it was working fine (just like the second one I have).

The day before yesterday, I moved it to another room and it stopped sending data.
I brought it closer to see if it would work again, but without success.

I tried removing it from Gladys and reconnecting it, but it didn’t help.

I removed it again in Gladys, but now I don’t even see it in the list of detected Zigbee devices…

Yet, it still had 99% of its battery and its LED reacts normally when I press and hold the button…

I restarted the Raspberry Pi but still nothing…
I also tried with a simple click on the button as indicated on the zigbee2mqtt.io page

I have no issues with the other thermometer even when I remove it and re-associate it

Any idea how to check if it’s coming from Gladys or if it’s upstream?

Thanks.

EDIT: The thermometer works fine with a Xiaomi hub.
My ZigBee key is the zzh! CC2652R

2

I’m following up on this topic,

my 2nd thermometer is doing the same thing…

3

These sensors only send data if the value changes. If you place it in the refrigerator, for example, will the information be sent?

PS: Gladys only receives data; the Zigbee part is managed by zigbee2mqtt

4

Sorry for not specifying but no, it doesn’t work.

Well, I’ll have to look into it to understand how it works…

EDIT: Mmmmhhhh, I don’t know why but after removing and re-adding the thermometers, I’m receiving the data again…