Hello, I’m looking for equipment for my water radiators — which brand or model would you recommend to work with Gladys? Thanks.
Have you seen this already? Têtes Thermostatiques connectées - Compte rendu de mes recherches
yes, I did do research and read everything, but I’m still perplexed
which Zig
When I used these thermostatic heads (for a few years), I controlled everything via Gladys or sometimes via the Zigbee2Mqtt service interface to validate.
Here’s the exact model: Têtes Thermostatiques connectées - Compte rendu de mes recherches - #26 par lmilcent
From Gladys’ interface, you can add the temperature and the head’s state to the dashboard. You’ll quickly see if the connected head is in heating mode (it lets water pass through the radiator) and, if so, at what opening percentage.
You’ll also have the temperature measured by the head, right next to the radiator.
And finally, if you want to verify that this is indeed the case, the Zigbee2MQTT component interface is available by default at http://ip-de-gladys:8080 (Gladys’ port 8080).
I recommend sticking with the Zigbee protocol; it’s the most affordable, widespread, and convenient 
1 Like
Thanks for the info — as I said recently I have everything on Zigbee, 22 devices
I’ll therefore look into getting an Aqara head; I already have Aqara devices, they’re good gear
1 Like