Problems with Aeotec LED Bulb

Goulby · January 16, 2021, 6:42pm

Good evening,

After moving, I reconnected my lamp with an LED bulb.

I can detect it in the Z-wave integration. But I have no access to any commands. Whether it’s ON-OFF, color management, or temperature.

Is this normal with the Z-wave module or a bug with my bulb?

pierre-gilles · January 18, 2021, 9:12am

Hello!

Have you « reactivated » your bulb a bit?
I know that on some Z-wave devices, there is a small button that sends all the information back to the controller when you click on it…

Goulby · January 18, 2021, 5:44pm

I don’t have that… Also, I haven’t reconnected all my office equipment yet, so I don’t have access to my Domoticz instance.

I have this in the integration

pierre-gilles · January 18, 2021, 6:50pm

Indeed, it did not receive any features… maybe you need to restart a scan?

If you have feedback on how it works on other boxes in this case, I’m interested.

This will help improve the integration in Gladys

Goulby · January 19, 2021, 11:20am

I just thought about it, the feature for managing white temperature and color isn’t released in the official version yet? Since it’s an RGBW LED, that could explain it.

That doesn’t explain why I don’t have the ON/OFF option though.

EDIT: I just went to look at the OpenZWave database (is that the library being used?) and I don’t see my model in the list. But in that case, why can I control it in Domoticz…

VonOx · January 19, 2021, 11:59am

If it is in openzwave

github.com/OpenZWave/open-zwave

config/aeotec/zw098.xml

master

<!-- Aeotec LED Bulb --><Product Revision="10" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0086:0062:0103</MetaDataItem>
    <MetaDataItem name="ProductPic">images/aeotec/zw098.png</MetaDataItem>
    <MetaDataItem id="0062" name="ZWProductPage" type="0103">https://products.z-wavealliance.org/products/1829/</MetaDataItem>
    <MetaDataItem name="Description">Aeotec LED Bulb is a low-cost Z-Wave LED module which allows control (on/off/dim) with the use of Z-Wave. 
It’s a bulb has a Smart RGB LED, which can be used to add colour to your home. The bulb has 5 main colour channels available for you to adjust: Red, Green, Blue, Warm White and Cold White. You can configure its colour according to your favour.
The LED Bulb is also a security Z-Wave device and supports the Over The Air (OTA) feature for the product’s firmware upgrade.</MetaDataItem>
    <MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/1851/LED Bulb manual.pdf</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">Turn the primary controller of Z-Wave network into exclusion mode, press the external switch of LED Bulb to turn off and then press the external switch again to turn on it, repeat the operation 3 times.</MetaDataItem>
    <MetaDataItem id="0062" name="Identifier" type="0103">ZW098-A52</MetaDataItem>
    <MetaDataItem id="0062" name="FrequencyName" type="0103">U.S. / Canada / Mexico</MetaDataItem>
    <MetaDataItem name="InclusionDescription">Turn the primary controller of Z-Wave network into inclusion mode, press the external switch of LED Bulb to turn it off and then press the external switch again to turn it on.</MetaDataItem>
    <MetaDataItem name="WakeupDescription">N/A</MetaDataItem>
    <MetaDataItem name="Name">LED Bulb</MetaDataItem>
    <MetaDataItem name="ResetDescription">Turn the controller of Z-Wave network into exclusion mode, press the external switch of LED Bulb to turn off and then press the external switch again to turn on it, repeat the operation 3 times.
After the LED Bulb is excluded from network, it will be reset to factory default state.
Use this procedure only in the event that your primary network controller is missing or inoperable.</MetaDataItem>
    <ChangeLog>
      <Entry author="Justin Hammond - Justin@dynam.ac" date="08 May 2019" revision="3">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1315/xml</Entry>

Ce fichier a été tronqué. afficher l'original

Goulby · January 19, 2021, 12:40pm

Ok, this must be the page with the devices that isn’t up to date

Topic		Replies	Views
Rajout d'une fonctionnalité sur le device LED1837R5 ( IKEA) Configuration zigbee2mqtt	2	856	November 27, 2021
Problème de luminosité avec ampoule connectée Zibgee Configuration	6	95	October 17, 2025
Pb avec bloc inverser les lumières Scènes	16	424	September 4, 2023
Demande d'avis sur un contrôleur Zigbee Configuration	18	230	January 22, 2025
Télécommande LORATAP Scènes zigbee2mqtt	19	1690	October 25, 2022

Problems with Aeotec LED Bulb

Related topics